[Attributes] Version = "2.0" File Type = "State" [Femur-Sphere Positions] Version = "2.3" Class = "simVITRO-Knee.lvlib:MRI Fiducial Sphere Positions.lvclass" Name = "Femur-Sphere Positions" Description = "This is the position state for the fiducial spheres" Notes = "This is the position state that defines the relative relationship between the Fiducial Spheres used for MRI registration. The rigid body is the coordinate system as defined by the spheres. This is not intended to be used to calulcate state date. It should only be used to collect the point cloud and then remove it from the state manager." Channel Names. = "6" Channel Names 0 = "x" Channel Names 1 = "y" Channel Names 2 = "z" Channel Names 3 = "roll" Channel Names 4 = "pitch" Channel Names 5 = "yaw" Channel Units. = "6" Channel Units 0 = "mm" Channel Units 1 = "mm" Channel Units 2 = "mm" Channel Units 3 = "deg" Channel Units 4 = "deg" Channel Units 5 = "deg" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "2" Included Sensors 0 = "Femur" Included Sensors 1 = "Femur" Included States. = "0" Save to Disk = "FALSE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "MRI Fiducial Sphere Positions" Data Description Parameters.Data Name = "Femur-Sphere Positions" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Femur-Sphere Positions" Enable State = "TRUE" Collected Points Rigid Body 1 (m) = " 1.2697565918 0.4281389160 0.1824108734 1.2607652588 0.4307732849 0.1758580017 1.2674162598 0.4356707458 0.1766729126 1.2713697510 0.4301175842 0.1814724579 1.2612553711 0.4326626282 0.1735599213 1.2607928467 0.4231555786 0.1738097992 1.2620644531 0.4210806274 0.1721582184 1.2695014648 0.4192687683 0.1778391113 1.2762979736 0.4209560242 0.1746512604 1.2791608887 0.4277757568 0.1716814117 1.2640728760 0.4669922791 0.1570884705 1.2496820068 0.4678270569 0.1525616913 1.2481455078 0.4615886230 0.1568480682 1.2518842773 0.4611272888 0.1572896881 1.2561810303 0.4570905762 0.1590143433 1.2672961426 0.4566938171 0.1484160004 1.2679007568 0.4606923523 0.1497796936 1.2638728027 0.4539407654 0.1529382782 1.2552338867 0.4547430115 0.1682432098 1.2553243408 0.4555040588 0.1570081329 1.2315458984 0.4030414734 0.1695286407 1.2360402832 0.4054717407 0.1698155670 1.2373548584 0.4159968872 0.1621755829 1.2420056152 0.4106144409 0.1616363068 1.2420620117 0.4082986450 0.1642580872 1.2394356689 0.4020721130 0.1649263458 1.2249305420 0.4021036682 0.1592245789 1.2310054932 0.3988899536 0.1621116180 1.2381960449 0.4006669617 0.1601968994 1.2277846680 0.4134633179 0.1665037231" Collected Points Rigid Body 1 Position Sensor (m,rad) = " 1.2744050293 0.5255722046 0.1577119141 1.1893544270 -0.7727715175 2.9731000441 1.2744473877 0.5255411987 0.1577778625 1.1896950453 -0.7734235259 2.9735296119 1.2744759521 0.5254790039 0.1578019257 1.1888389722 -0.7733428987 2.9737085764 1.2744973145 0.5254515381 0.1578122406 1.1887971606 -0.7742035658 2.9733780781 1.2745250244 0.5254254761 0.1577748260 1.1888753243 -0.7734179332 2.9730137576 1.2745444336 0.5254628296 0.1577966309 1.1894122176 -0.7738190719 2.9729272049 1.2745858154 0.5254534912 0.1577902679 1.1883658616 -0.7728946887 2.9727674152 1.2745219727 0.5254397583 0.1577626953 1.1901722838 -0.7730006825 2.9737879386 1.2744674072 0.5254954834 0.1577427826 1.1892644122 -0.7727329016 2.9726933794 1.2744663086 0.5254214478 0.1577834015 1.1890175371 -0.7737598831 2.9724797938 1.2745677490 0.5253452759 0.1577716980 1.1895546967 -0.7730717889 2.9735866036 1.2745566406 0.5253745728 0.1577825012 1.1892111490 -0.7733229250 2.9732172231 1.2745566406 0.5253516235 0.1577421417 1.1890850483 -0.7732478238 2.9732720843 1.2745920410 0.5253926392 0.1577388153 1.1897250059 -0.7729693237 2.9733983181 1.2745848389 0.5254113159 0.1577522278 1.1896325942 -0.7731723232 2.9732095000 1.2745419922 0.5253973999 0.1577703705 1.1893830560 -0.7728489489 2.9730766082 1.2745728760 0.5253489380 0.1577927094 1.1896457768 -0.7731020823 2.9730385250 1.2746135254 0.5253778076 0.1577537842 1.1900392589 -0.7728765126 2.9735024477 1.2746217041 0.5253463745 0.1577565002 1.1897371233 -0.7733778527 2.9731903252 1.2746835938 0.5253978882 0.1577653351 1.1894031629 -0.7733622732 2.9728124227 1.2746440430 0.5253817139 0.1577513885 1.1897544338 -0.7734666025 2.9731927221 1.2746387939 0.5253623657 0.1577589264 1.1892965033 -0.7730027464 2.9733232170 1.2746561279 0.5253211060 0.1577965088 1.1893970376 -0.7731753858 2.9734963224 1.2743640137 0.5255210571 0.1580337067 1.1940097658 -0.7815857151 2.9717620719 1.2744306641 0.5254538574 0.1577524567 1.1897078285 -0.7735420365 2.9731788736 1.2744393311 0.5254965820 0.1577243042 1.1899796041 -0.7734448977 2.9731839336 1.2745263672 0.5255349731 0.1575072174 1.1952565246 -0.7549174192 2.9712566040 1.2745051270 0.5256130981 0.1574812469 1.1975335274 -0.7560530577 2.9703697713 1.2743562012 0.5258776855 0.1576154022 1.1857616896 -0.7531590671 2.9834312449 1.2744698486 0.5254176636 0.1577373199 1.1887426989 -0.7731653324 2.9729173512" Collected Points Rigid Body 2 (m) = " 0.8217518311 0.4892655334 0.1363506012 0.8289193726 0.4853492737 0.1380001068 0.8212972412 0.4781622620 0.1412024536 0.8135084839 0.4819710999 0.1362247009 0.8152264404 0.4869891357 0.1316634979 0.8219979248 0.4885131226 0.1265673676 0.8287153320 0.4791153259 0.1393586426 0.8288997192 0.4875125427 0.1349674225 0.8266828003 0.4892589722 0.1305408936 0.8286353149 0.4842015686 0.1256611786 0.8426975708 0.4817957764 0.1342283020 0.8473568726 0.4782366638 0.1389504547 0.8453645630 0.4726141663 0.1396381989 0.8510141602 0.4727972717 0.1392285004 0.8538861694 0.4752471008 0.1365802155 0.8544005127 0.4796969910 0.1316733704 0.8420923462 0.4823843689 0.1312046509 0.8485570679 0.4831395569 0.1287888031 0.8442769775 0.4814368896 0.1254026871 0.8391798096 0.4787833862 0.1274743652 0.8288264160 0.3790331726 0.1285724182 0.8337369385 0.3822231140 0.1279772491 0.8319386597 0.3868096008 0.1318725281 0.8290236206 0.3869189453 0.1330744324 0.8184215698 0.3859799805 0.1264175339 0.8249562378 0.3806600647 0.1216304016 0.8284738770 0.3791712646 0.1220422745 0.8290726318 0.3836586304 0.1161714401 0.8382297363 0.3874797974 0.1235951920 0.8345112915 0.3892804871 0.1277204285" Collected Points Rigid Body 2 Position Sensor (m,rad) = " 1.2744696045 0.5255238647 0.1577964172 1.1887048820 -0.7731211905 2.9736494542 1.2744152832 0.5255433960 0.1577733154 1.1895139504 -0.7725577988 2.9738704966 1.2743780518 0.5255391846 0.1577177734 1.1905894680 -0.7728574710 2.9737509206 1.2744665527 0.5255233154 0.1577749176 1.1896548316 -0.7734276538 2.9735386667 1.2744471436 0.5255178223 0.1577704468 1.1899857294 -0.7739426425 2.9736561121 1.2744606934 0.5255428467 0.1577788696 1.1889296528 -0.7727007440 2.9733924591 1.2743765869 0.5255567627 0.1577584229 1.1894762666 -0.7728711863 2.9732102989 1.2744235840 0.5255366821 0.1577755432 1.1894799951 -0.7730477538 2.9736995216 1.2744400635 0.5255360107 0.1577817993 1.1893730692 -0.7727221158 2.9739333472 1.2744468994 0.5255234985 0.1578131561 1.1889420365 -0.7733993577 2.9736180289 1.2744759521 0.5255204468 0.1577886658 1.1895508352 -0.7731211905 2.9737991238 1.2744876709 0.5255443726 0.1577622986 1.1895925136 -0.7726625942 2.9736012510 1.2744947510 0.5254893188 0.1577377777 1.1898397881 -0.7721915476 2.9753759815 1.2744201660 0.5254853516 0.1577196808 1.1894720056 -0.7723366233 2.9750518748 1.2743199463 0.5254778442 0.1577616882 1.1892488327 -0.7730618686 2.9747232407 1.2744669189 0.5254918823 0.1577574768 1.1897013038 -0.7724468781 2.9746670480 1.2745212402 0.5254910278 0.1577793732 1.1890239287 -0.7738373811 2.9737943302 1.2744572754 0.5254719849 0.1578066559 1.1887624063 -0.7731249855 2.9741242958 1.2744661865 0.5254816895 0.1577887726 1.1895118198 -0.7729791109 2.9746071269 1.2744650879 0.5254553223 0.1576823578 1.1900814700 -0.7684964781 2.9764271312 1.2743061523 0.5252108765 0.1577761230 1.1902336697 -0.7732188619 2.9718992247 1.2743503418 0.5252692261 0.1577960052 1.1899641578 -0.7736090150 2.9708211771 1.2742681885 0.5252388916 0.1578639374 1.1889738613 -0.7733086105 2.9715032127 1.2743736572 0.5252454834 0.1578581390 1.1881111303 -0.7724909534 2.9718970942 1.2744157715 0.5252446289 0.1578334045 1.1886436293 -0.7736111456 2.9714624663 1.2744602051 0.5253333740 0.1577919769 1.1903188908 -0.7743492407 2.9705953411 1.2745307617 0.5252776489 0.1577704926 1.1909726969 -0.7737967013 2.9709556667 1.2746458740 0.5250932007 0.1577862549 1.1910274248 -0.7744775385 2.9681031549 1.2745155029 0.5252279663 0.1577832489 1.1900634937 -0.7742569621 2.9679875737 1.2745484619 0.5253248291 0.1578028259 1.1899826667 -0.7746138923 2.9680187327" Position Offset (m,rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T_Sensor1_RB1 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_Sensor2_RB2 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Collected Point Names - Rigid Body 1. = "30" Collected Point Names - Rigid Body 1 0 = "Sphere 1_Point 1" Collected Point Names - Rigid Body 1 1 = "Sphere 1_Point 2" Collected Point Names - Rigid Body 1 2 = "Sphere 1_Point 3" Collected Point Names - Rigid Body 1 3 = "Sphere 1_Point 4" Collected Point Names - Rigid Body 1 4 = "Sphere 1_Point 5" Collected Point Names - Rigid Body 1 5 = "Sphere 1_Point 6" Collected Point Names - Rigid Body 1 6 = "Sphere 1_Point 7" Collected Point Names - Rigid Body 1 7 = "Sphere 1_Point 8" Collected Point Names - Rigid Body 1 8 = "Sphere 1_Point 9" Collected Point Names - Rigid Body 1 9 = "Sphere 1_Point 10" Collected Point Names - Rigid Body 1 10 = "Sphere 2_Point 1" Collected Point Names - Rigid Body 1 11 = "Sphere 2_Point 2" Collected Point Names - Rigid Body 1 12 = "Sphere 2_Point 3" Collected Point Names - Rigid Body 1 13 = "Sphere 2_Point 4" Collected Point Names - Rigid Body 1 14 = "Sphere 2_Point 5" Collected Point Names - Rigid Body 1 15 = "Sphere 2_Point 6" Collected Point Names - Rigid Body 1 16 = "Sphere 2_Point 7" Collected Point Names - Rigid Body 1 17 = "Sphere 2_Point 8" Collected Point Names - Rigid Body 1 18 = "Sphere 2_Point 9" Collected Point Names - Rigid Body 1 19 = "Sphere 2_Point 10" Collected Point Names - Rigid Body 1 20 = "Sphere 3_Point 1" Collected Point Names - Rigid Body 1 21 = "Sphere 3_Point 2" Collected Point Names - Rigid Body 1 22 = "Sphere 3_Point 3" Collected Point Names - Rigid Body 1 23 = "Sphere 3_Point 4" Collected Point Names - Rigid Body 1 24 = "Sphere 3_Point 5" Collected Point Names - Rigid Body 1 25 = "Sphere 3_Point 6" Collected Point Names - Rigid Body 1 26 = "Sphere 3_Point 7" Collected Point Names - Rigid Body 1 27 = "Sphere 3_Point 8" Collected Point Names - Rigid Body 1 28 = "Sphere 3_Point 9" Collected Point Names - Rigid Body 1 29 = "Sphere 3_Point 10" Collected Point Names - Rigid Body 2. = "30" Collected Point Names - Rigid Body 2 0 = "Sphere 1_Point 1" Collected Point Names - Rigid Body 2 1 = "Sphere 1_Point 2" Collected Point Names - Rigid Body 2 2 = "Sphere 1_Point 3" Collected Point Names - Rigid Body 2 3 = "Sphere 1_Point 4" Collected Point Names - Rigid Body 2 4 = "Sphere 1_Point 5" Collected Point Names - Rigid Body 2 5 = "Sphere 1_Point 6" Collected Point Names - Rigid Body 2 6 = "Sphere 1_Point 7" Collected Point Names - Rigid Body 2 7 = "Sphere 1_Point 8" Collected Point Names - Rigid Body 2 8 = "Sphere 1_Point 9" Collected Point Names - Rigid Body 2 9 = "Sphere 1_Point 10" Collected Point Names - Rigid Body 2 10 = "Sphere 2_Point 1" Collected Point Names - Rigid Body 2 11 = "Sphere 2_Point 2" Collected Point Names - Rigid Body 2 12 = "Sphere 2_Point 3" Collected Point Names - Rigid Body 2 13 = "Sphere 2_Point 4" Collected Point Names - Rigid Body 2 14 = "Sphere 2_Point 5" Collected Point Names - Rigid Body 2 15 = "Sphere 2_Point 6" Collected Point Names - Rigid Body 2 16 = "Sphere 2_Point 7" Collected Point Names - Rigid Body 2 17 = "Sphere 2_Point 8" Collected Point Names - Rigid Body 2 18 = "Sphere 2_Point 9" Collected Point Names - Rigid Body 2 19 = "Sphere 2_Point 10" Collected Point Names - Rigid Body 2 20 = "Sphere 3_Point 1" Collected Point Names - Rigid Body 2 21 = "Sphere 3_Point 2" Collected Point Names - Rigid Body 2 22 = "Sphere 3_Point 3" Collected Point Names - Rigid Body 2 23 = "Sphere 3_Point 4" Collected Point Names - Rigid Body 2 24 = "Sphere 3_Point 5" Collected Point Names - Rigid Body 2 25 = "Sphere 3_Point 6" Collected Point Names - Rigid Body 2 26 = "Sphere 3_Point 7" Collected Point Names - Rigid Body 2 27 = "Sphere 3_Point 8" Collected Point Names - Rigid Body 2 28 = "Sphere 3_Point 9" Collected Point Names - Rigid Body 2 29 = "Sphere 3_Point 10" Collected Point Images - Rigid Body 1. = "30" Collected Point Images - Rigid Body 1 0 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/01proxFemur.jpg" Collected Point Images - Rigid Body 1 1 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/01proxFemur.jpg" Collected Point Images - Rigid Body 1 2 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/01proxFemur.jpg" Collected Point Images - Rigid Body 1 3 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/01proxFemur.jpg" Collected Point Images - Rigid Body 1 4 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/01proxFemur.jpg" Collected Point Images - Rigid Body 1 5 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/01proxFemur.jpg" Collected Point Images - Rigid Body 1 6 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/01proxFemur.jpg" Collected Point Images - Rigid Body 1 7 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/01proxFemur.jpg" Collected Point Images - Rigid Body 1 8 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/01proxFemur.jpg" Collected Point Images - Rigid Body 1 9 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/01proxFemur.jpg" Collected Point Images - Rigid Body 1 10 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/02latFemur.jpg" Collected Point Images - Rigid Body 1 11 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/02latFemur.jpg" Collected Point Images - Rigid Body 1 12 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/02latFemur.jpg" Collected Point Images - Rigid Body 1 13 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/02latFemur.jpg" Collected Point Images - Rigid Body 1 14 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/02latFemur.jpg" Collected Point Images - Rigid Body 1 15 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/02latFemur.jpg" Collected Point Images - Rigid Body 1 16 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/02latFemur.jpg" Collected Point Images - Rigid Body 1 17 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/02latFemur.jpg" Collected Point Images - Rigid Body 1 18 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/02latFemur.jpg" Collected Point Images - Rigid Body 1 19 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/02latFemur.jpg" Collected Point Images - Rigid Body 1 20 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/03medFemur.jpg" Collected Point Images - Rigid Body 1 21 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/03medFemur.jpg" Collected Point Images - Rigid Body 1 22 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/03medFemur.jpg" Collected Point Images - Rigid Body 1 23 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/03medFemur.jpg" Collected Point Images - Rigid Body 1 24 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/03medFemur.jpg" Collected Point Images - Rigid Body 1 25 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/03medFemur.jpg" Collected Point Images - Rigid Body 1 26 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/03medFemur.jpg" Collected Point Images - Rigid Body 1 27 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/03medFemur.jpg" Collected Point Images - Rigid Body 1 28 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/03medFemur.jpg" Collected Point Images - Rigid Body 1 29 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/03medFemur.jpg" Collected Point Images - Rigid Body 2. = "30" Collected Point Images - Rigid Body 2 0 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/04latDistFemur.jpg" Collected Point Images - Rigid Body 2 1 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/04latDistFemur.jpg" Collected Point Images - Rigid Body 2 2 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/04latDistFemur.jpg" Collected Point Images - Rigid Body 2 3 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/04latDistFemur.jpg" Collected Point Images - Rigid Body 2 4 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/04latDistFemur.jpg" Collected Point Images - Rigid Body 2 5 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/04latDistFemur.jpg" Collected Point Images - Rigid Body 2 6 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/04latDistFemur.jpg" Collected Point Images - Rigid Body 2 7 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/04latDistFemur.jpg" Collected Point Images - Rigid Body 2 8 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/04latDistFemur.jpg" Collected Point Images - Rigid Body 2 9 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/04latDistFemur.jpg" Collected Point Images - Rigid Body 2 10 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/05antDistFemur.jpg" Collected Point Images - Rigid Body 2 11 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/05antDistFemur.jpg" Collected Point Images - Rigid Body 2 12 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/05antDistFemur.jpg" Collected Point Images - Rigid Body 2 13 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/05antDistFemur.jpg" Collected Point Images - Rigid Body 2 14 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/05antDistFemur.jpg" Collected Point Images - Rigid Body 2 15 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/05antDistFemur.jpg" Collected Point Images - Rigid Body 2 16 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/05antDistFemur.jpg" Collected Point Images - Rigid Body 2 17 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/05antDistFemur.jpg" Collected Point Images - Rigid Body 2 18 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/05antDistFemur.jpg" Collected Point Images - Rigid Body 2 19 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/05antDistFemur.jpg" Collected Point Images - Rigid Body 2 20 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/06medDistFemur.jpg" Collected Point Images - Rigid Body 2 21 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/06medDistFemur.jpg" Collected Point Images - Rigid Body 2 22 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/06medDistFemur.jpg" Collected Point Images - Rigid Body 2 23 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/06medDistFemur.jpg" Collected Point Images - Rigid Body 2 24 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/06medDistFemur.jpg" Collected Point Images - Rigid Body 2 25 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/06medDistFemur.jpg" Collected Point Images - Rigid Body 2 26 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/06medDistFemur.jpg" Collected Point Images - Rigid Body 2 27 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/06medDistFemur.jpg" Collected Point Images - Rigid Body 2 28 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/06medDistFemur.jpg" Collected Point Images - Rigid Body 2 29 = "/C/Workspaces/Multis_in vitro testing/RegistrationMarkers/06medDistFemur.jpg" T_World1_World2 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Rigid Body 1 Name = "Femur-Proximal" Rigid Body 2 Name = "Femur-Distal" Initial Collected Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Collected Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Fiducials Enabled RB1 = "FALSE" Fiducials Enabled RB2 = "FALSE" Fiducial Type RB1 = "Manual Digitization" Fiducial Type RB2 = "Manual Digitization" Rigid Body 1 Fiducial Sensor Name = "" Rigid Body 2 Fiducial Sensor Name = "" Rigid Body 1 Number of Fiducials = "0.0000000000" Rigid Body 2 Number of Fiducials = "0.0000000000" Initial Manual Fiducial Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Manual Fiducial Points Rigid Body 1 (m) = " " Final Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 2 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 2 (m, rady) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T RB1-OPT_RB1-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T RB2-OPT_RB2-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_World1_World2 for Fiducials = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen1_RB1 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen2_RB2 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Digitization Phase = "Final" Collected 6-DOF Fiducial Point Images - RB1 = "/C/Program Files/National Instruments/LabVIEW 2015/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Images - RB2 = "/C/Program Files/National Instruments/LabVIEW 2015/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Names - RB1. = "0" Collected Manual Fiducial Point Names - RB2. = "0" Collected Manual Fiducial Point Images - RB1. = "3" Collected Manual Fiducial Point Images - RB1 0 = "/C/Program Files/National Instruments/LabVIEW 2015/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 1 = "/C/Program Files/National Instruments/LabVIEW 2015/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 2 = "/C/Program Files/National Instruments/LabVIEW 2015/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2. = "3" Collected Manual Fiducial Point Images - RB2 0 = "/C/Program Files/National Instruments/LabVIEW 2015/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 1 = "/C/Program Files/National Instruments/LabVIEW 2015/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 2 = "/C/Program Files/National Instruments/LabVIEW 2015/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Names - RB1 = "" Collected 6-DOF Fiducial Point Names - RB2 = "" RB1 Point Collection Array. = "3" RB1 Point Collection Array 0.Linkage.Linked? = "FALSE" RB1 Point Collection Array 0.Linkage.Linked RB Name = "" RB1 Point Collection Array 0.Linkage.Linked Index = "0" RB1 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 0.Timing.Number of Data Points = "10" RB1 Point Collection Array 0.Point Collection Type = "0" RB1 Point Collection Array 0.Fitting = "" RB1 Point Collection Array 0.Digitizer Name = "Digitizer" RB1 Point Collection Array 0.Digitizer Points = " " RB1 Point Collection Array 0.Reference Sensor Name = "" RB1 Point Collection Array 0.Reference Sensor Points = " " RB1 Point Collection Array 1.Linkage.Linked? = "FALSE" RB1 Point Collection Array 1.Linkage.Linked RB Name = "" RB1 Point Collection Array 1.Linkage.Linked Index = "0" RB1 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 1.Timing.Number of Data Points = "10" RB1 Point Collection Array 1.Point Collection Type = "0" RB1 Point Collection Array 1.Fitting = "" RB1 Point Collection Array 1.Digitizer Name = "Digitizer" RB1 Point Collection Array 1.Digitizer Points = " " RB1 Point Collection Array 1.Reference Sensor Name = "" RB1 Point Collection Array 1.Reference Sensor Points = " " RB1 Point Collection Array 2.Linkage.Linked? = "FALSE" RB1 Point Collection Array 2.Linkage.Linked RB Name = "" RB1 Point Collection Array 2.Linkage.Linked Index = "0" RB1 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 2.Timing.Number of Data Points = "10" RB1 Point Collection Array 2.Point Collection Type = "0" RB1 Point Collection Array 2.Fitting = "" RB1 Point Collection Array 2.Digitizer Name = "Digitizer" RB1 Point Collection Array 2.Digitizer Points = " " RB1 Point Collection Array 2.Reference Sensor Name = "" RB1 Point Collection Array 2.Reference Sensor Points = " " RB2 Point Collection Array. = "3" RB2 Point Collection Array 0.Linkage.Linked? = "FALSE" RB2 Point Collection Array 0.Linkage.Linked RB Name = "" RB2 Point Collection Array 0.Linkage.Linked Index = "0" RB2 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 0.Timing.Number of Data Points = "10" RB2 Point Collection Array 0.Point Collection Type = "0" RB2 Point Collection Array 0.Fitting = "" RB2 Point Collection Array 0.Digitizer Name = "Digitizer" RB2 Point Collection Array 0.Digitizer Points = " " RB2 Point Collection Array 0.Reference Sensor Name = "" RB2 Point Collection Array 0.Reference Sensor Points = " " RB2 Point Collection Array 1.Linkage.Linked? = "FALSE" RB2 Point Collection Array 1.Linkage.Linked RB Name = "" RB2 Point Collection Array 1.Linkage.Linked Index = "0" RB2 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 1.Timing.Number of Data Points = "10" RB2 Point Collection Array 1.Point Collection Type = "0" RB2 Point Collection Array 1.Fitting = "" RB2 Point Collection Array 1.Digitizer Name = "Digitizer" RB2 Point Collection Array 1.Digitizer Points = " " RB2 Point Collection Array 1.Reference Sensor Name = "" RB2 Point Collection Array 1.Reference Sensor Points = " " RB2 Point Collection Array 2.Linkage.Linked? = "FALSE" RB2 Point Collection Array 2.Linkage.Linked RB Name = "" RB2 Point Collection Array 2.Linkage.Linked Index = "0" RB2 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 2.Timing.Number of Data Points = "10" RB2 Point Collection Array 2.Point Collection Type = "0" RB2 Point Collection Array 2.Fitting = "" RB2 Point Collection Array 2.Digitizer Name = "Digitizer" RB2 Point Collection Array 2.Digitizer Points = " " RB2 Point Collection Array 2.Reference Sensor Name = "" RB2 Point Collection Array 2.Reference Sensor Points = " " RB1 Fid Pt Collection Array. = "3" RB1 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 0.Point Collection Type = "0" RB1 Fid Pt Collection Array 0.Fitting = "" RB1 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 0.Digitizer Points = " " RB1 Fid Pt Collection Array 0.Reference Sensor Name = "" RB1 Fid Pt Collection Array 0.Reference Sensor Points = " " RB1 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 1.Point Collection Type = "0" RB1 Fid Pt Collection Array 1.Fitting = "" RB1 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 1.Digitizer Points = " " RB1 Fid Pt Collection Array 1.Reference Sensor Name = "" RB1 Fid Pt Collection Array 1.Reference Sensor Points = " " RB1 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 2.Point Collection Type = "0" RB1 Fid Pt Collection Array 2.Fitting = "" RB1 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 2.Digitizer Points = " " RB1 Fid Pt Collection Array 2.Reference Sensor Name = "" RB1 Fid Pt Collection Array 2.Reference Sensor Points = " " RB2 Fid Pt Collection Array. = "3" RB2 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 0.Point Collection Type = "0" RB2 Fid Pt Collection Array 0.Fitting = "" RB2 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 0.Digitizer Points = " " RB2 Fid Pt Collection Array 0.Reference Sensor Name = "" RB2 Fid Pt Collection Array 0.Reference Sensor Points = " " RB2 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 1.Point Collection Type = "0" RB2 Fid Pt Collection Array 1.Fitting = "" RB2 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 1.Digitizer Points = " " RB2 Fid Pt Collection Array 1.Reference Sensor Name = "" RB2 Fid Pt Collection Array 1.Reference Sensor Points = " " RB2 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 2.Point Collection Type = "0" RB2 Fid Pt Collection Array 2.Fitting = "" RB2 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 2.Digitizer Points = " " RB2 Fid Pt Collection Array 2.Reference Sensor Name = "" RB2 Fid Pt Collection Array 2.Reference Sensor Points = " " Rigid Body 1 CS Definition Name = "simVITRO CS" Rigid Body 2 CS Definition Name = "simVITRO CS" [Forceps Left] Version = "2.3" Class = "Surgical Tool Position.lvclass" Name = "Forceps Left" Description = "This is the position state for the Ultrasound Probe" Notes = "This is the position state that defines the relative relationship between a bone and the Ultrasound Probe. Rigid Body 1 is the bone and rigid body 2 is the coordinate system as defined by the ultrasound probe." Channel Names. = "6" Channel Names 0 = "x" Channel Names 1 = "y" Channel Names 2 = "z" Channel Names 3 = "roll" Channel Names 4 = "pitch" Channel Names 5 = "yaw" Channel Units. = "6" Channel Units 0 = "mm" Channel Units 1 = "mm" Channel Units 2 = "mm" Channel Units 3 = "deg" Channel Units 4 = "deg" Channel Units 5 = "deg" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "2" Included Sensors 0 = "Femur" Included Sensors 1 = "Left Forcep Pos" Included States. = "0" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Surgical Tool Position" Data Description Parameters.Data Name = "Forceps Left" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Forceps Left" Enable State = "TRUE" Collected Points Rigid Body 1 (m) = " 0.8098500366 0.4765617371 0.1202015686 0.8130097656 0.3951024780 0.1287006378 1.2546713867 0.4252901306 0.1662164154 1.2920426025 0.4256895142 0.1372024841 1.2398444824 0.4360792542 0.1011189346 1.2336650391 0.4284200134 0.1582896118" Collected Points Rigid Body 1 Position Sensor (m,rad) = " 1.2743641357 0.5254555054 0.1577446442 1.1889727960 -0.7727368298 2.9731703515 1.2744483643 0.5255729980 0.1578283997 1.1884582733 -0.7723162501 2.9720456986 1.2742990723 0.5254907837 0.1577628174 1.1898267386 -0.7734403704 2.9727900521 1.2742718506 0.5255087280 0.1577700195 1.1887747900 -0.7734998254 2.9719255900 1.2740421143 0.5255019531 0.1577745819 1.1896517690 -0.7737301889 2.9723967032 1.2741342773 0.5254696655 0.1577571411 1.1897488412 -0.7735054181 2.9727855247" Collected Points Rigid Body 2 (m) = " 1.0402641602 0.6282924194 0.0073961434 1.0201282349 0.6167994385 0.0234285583 0.9230564575 0.5382841187 0.0053964925" Collected Points Rigid Body 2 Position Sensor (m,rad) = " 0.9654497070 0.6099094849 0.0460065231 -0.0468963027 -0.8474673271 0.6133583565 0.9648420410 0.6094056396 0.0459141159 -0.0522445877 -0.8447198104 0.5900461095 0.9681463013 0.6074755249 0.0463293343 -0.0402556523 -0.8267721020 0.5613277122" Position Offset (m,rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T_Sensor1_RB1 = " -0.0345200751 -0.7307291107 -0.6817942000 0.2927516112 0.5310051288 -0.5913505905 0.6069085865 -0.2459303416 -0.8466651744 -0.3410856870 0.4084343723 -0.2780039980 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_Sensor2_RB2 = " 0.6983189495 -0.2232488829 -0.6800813048 0.0185533718 0.2341213847 0.9690955980 -0.0777232221 -0.0242818696 0.6764154212 -0.1049459780 0.7290051575 -0.0805733164 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Collected Point Names - Rigid Body 1. = "6" Collected Point Names - Rigid Body 1 0 = "Lateral Femoral Epicondyle" Collected Point Names - Rigid Body 1 1 = "Medial Femoral Epicondyle" Collected Point Names - Rigid Body 1 2 = "Femoral Head Point 1" Collected Point Names - Rigid Body 1 3 = "Femoral Head Point 2" Collected Point Names - Rigid Body 1 4 = "Femoral Head Point 3" Collected Point Names - Rigid Body 1 5 = "Femoral Head Point 4" Collected Point Names - Rigid Body 2. = "3" Collected Point Names - Rigid Body 2 0 = "Tip" Collected Point Names - Rigid Body 2 1 = "Elbow" Collected Point Names - Rigid Body 2 2 = "Handle End" Collected Point Images - Rigid Body 1. = "6" Collected Point Images - Rigid Body 1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/RKnee_LFE.jpg" Collected Point Images - Rigid Body 1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/RKnee_MFE.jpg" Collected Point Images - Rigid Body 1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt1.JPG" Collected Point Images - Rigid Body 1 3 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt2.JPG" Collected Point Images - Rigid Body 1 4 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt3.JPG" Collected Point Images - Rigid Body 1 5 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt4.JPG" Collected Point Images - Rigid Body 2. = "3" Collected Point Images - Rigid Body 2 0 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationForceps/forcepsLeftTip.jpg" Collected Point Images - Rigid Body 2 1 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationForceps/forcepsLeftElbow.jpg" Collected Point Images - Rigid Body 2 2 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationForceps/forcepsLeftHandle.jpg" T_World1_World2 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Rigid Body 1 Name = "Femur" Rigid Body 2 Name = "Left Forcep" Initial Collected Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Collected Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Fiducials Enabled RB1 = "FALSE" Fiducials Enabled RB2 = "FALSE" Fiducial Type RB1 = "Manual Digitization" Fiducial Type RB2 = "Manual Digitization" Rigid Body 1 Fiducial Sensor Name = "" Rigid Body 2 Fiducial Sensor Name = "" Rigid Body 1 Number of Fiducials = "0.0000000000" Rigid Body 2 Number of Fiducials = "0.0000000000" Initial Manual Fiducial Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Manual Fiducial Points Rigid Body 1 (m) = " " Final Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 2 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 2 (m, rady) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T RB1-OPT_RB1-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T RB2-OPT_RB2-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_World1_World2 for Fiducials = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen1_RB1 = " -0.0345200751 -0.7307291107 -0.6817942000 0.2927516112 0.5310051288 -0.5913505905 0.6069085865 -0.2459303416 -0.8466651744 -0.3410856870 0.4084343723 -0.2780039980 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen2_RB2 = " 0.6983189495 -0.2232488829 -0.6800813048 0.0185533718 0.2341213847 0.9690955980 -0.0777232221 -0.0242818696 0.6764154212 -0.1049459780 0.7290051575 -0.0805733164 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Digitization Phase = "Final" Collected 6-DOF Fiducial Point Images - RB1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Images - RB2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Names - RB1. = "0" Collected Manual Fiducial Point Names - RB2. = "0" Collected Manual Fiducial Point Images - RB1. = "3" Collected Manual Fiducial Point Images - RB1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2. = "3" Collected Manual Fiducial Point Images - RB2 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Names - RB1 = "" Collected 6-DOF Fiducial Point Names - RB2 = "" RB1 Point Collection Array. = "6" RB1 Point Collection Array 0.Linkage.Linked? = "FALSE" RB1 Point Collection Array 0.Linkage.Linked RB Name = "Right Forcep" RB1 Point Collection Array 0.Linkage.Linked Index = "0" RB1 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 0.Timing.Number of Data Points = "10" RB1 Point Collection Array 0.Point Collection Type = "0" RB1 Point Collection Array 0.Fitting = "" RB1 Point Collection Array 0.Digitizer Name = "Digitizer" RB1 Point Collection Array 0.Digitizer Points = " " RB1 Point Collection Array 0.Reference Sensor Name = "" RB1 Point Collection Array 0.Reference Sensor Points = " " RB1 Point Collection Array 1.Linkage.Linked? = "FALSE" RB1 Point Collection Array 1.Linkage.Linked RB Name = "" RB1 Point Collection Array 1.Linkage.Linked Index = "0" RB1 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 1.Timing.Number of Data Points = "10" RB1 Point Collection Array 1.Point Collection Type = "0" RB1 Point Collection Array 1.Fitting = "" RB1 Point Collection Array 1.Digitizer Name = "Digitizer" RB1 Point Collection Array 1.Digitizer Points = " " RB1 Point Collection Array 1.Reference Sensor Name = "" RB1 Point Collection Array 1.Reference Sensor Points = " " RB1 Point Collection Array 2.Linkage.Linked? = "FALSE" RB1 Point Collection Array 2.Linkage.Linked RB Name = "" RB1 Point Collection Array 2.Linkage.Linked Index = "0" RB1 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 2.Timing.Number of Data Points = "10" RB1 Point Collection Array 2.Point Collection Type = "0" RB1 Point Collection Array 2.Fitting = "" RB1 Point Collection Array 2.Digitizer Name = "Digitizer" RB1 Point Collection Array 2.Digitizer Points = " " RB1 Point Collection Array 2.Reference Sensor Name = "" RB1 Point Collection Array 2.Reference Sensor Points = " " RB1 Point Collection Array 3.Linkage.Linked? = "FALSE" RB1 Point Collection Array 3.Linkage.Linked RB Name = "" RB1 Point Collection Array 3.Linkage.Linked Index = "0" RB1 Point Collection Array 3.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 3.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 3.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 3.Timing.Number of Data Points = "10" RB1 Point Collection Array 3.Point Collection Type = "0" RB1 Point Collection Array 3.Fitting = "" RB1 Point Collection Array 3.Digitizer Name = "Digitizer" RB1 Point Collection Array 3.Digitizer Points = " " RB1 Point Collection Array 3.Reference Sensor Name = "" RB1 Point Collection Array 3.Reference Sensor Points = " " RB1 Point Collection Array 4.Linkage.Linked? = "FALSE" RB1 Point Collection Array 4.Linkage.Linked RB Name = "" RB1 Point Collection Array 4.Linkage.Linked Index = "0" RB1 Point Collection Array 4.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 4.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 4.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 4.Timing.Number of Data Points = "10" RB1 Point Collection Array 4.Point Collection Type = "0" RB1 Point Collection Array 4.Fitting = "" RB1 Point Collection Array 4.Digitizer Name = "Digitizer" RB1 Point Collection Array 4.Digitizer Points = " " RB1 Point Collection Array 4.Reference Sensor Name = "" RB1 Point Collection Array 4.Reference Sensor Points = " " RB1 Point Collection Array 5.Linkage.Linked? = "FALSE" RB1 Point Collection Array 5.Linkage.Linked RB Name = "" RB1 Point Collection Array 5.Linkage.Linked Index = "0" RB1 Point Collection Array 5.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 5.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 5.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 5.Timing.Number of Data Points = "10" RB1 Point Collection Array 5.Point Collection Type = "0" RB1 Point Collection Array 5.Fitting = "" RB1 Point Collection Array 5.Digitizer Name = "Digitizer" RB1 Point Collection Array 5.Digitizer Points = " " RB1 Point Collection Array 5.Reference Sensor Name = "" RB1 Point Collection Array 5.Reference Sensor Points = " " RB2 Point Collection Array. = "14" RB2 Point Collection Array 0.Linkage.Linked? = "FALSE" RB2 Point Collection Array 0.Linkage.Linked RB Name = "" RB2 Point Collection Array 0.Linkage.Linked Index = "0" RB2 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 0.Timing.Number of Data Points = "10" RB2 Point Collection Array 0.Point Collection Type = "0" RB2 Point Collection Array 0.Fitting = "" RB2 Point Collection Array 0.Digitizer Name = "Digitizer" RB2 Point Collection Array 0.Digitizer Points = " " RB2 Point Collection Array 0.Reference Sensor Name = "" RB2 Point Collection Array 0.Reference Sensor Points = " " RB2 Point Collection Array 1.Linkage.Linked? = "FALSE" RB2 Point Collection Array 1.Linkage.Linked RB Name = "" RB2 Point Collection Array 1.Linkage.Linked Index = "0" RB2 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 1.Timing.Number of Data Points = "10" RB2 Point Collection Array 1.Point Collection Type = "0" RB2 Point Collection Array 1.Fitting = "" RB2 Point Collection Array 1.Digitizer Name = "Digitizer" RB2 Point Collection Array 1.Digitizer Points = " " RB2 Point Collection Array 1.Reference Sensor Name = "" RB2 Point Collection Array 1.Reference Sensor Points = " " RB2 Point Collection Array 2.Linkage.Linked? = "FALSE" RB2 Point Collection Array 2.Linkage.Linked RB Name = "" RB2 Point Collection Array 2.Linkage.Linked Index = "0" RB2 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 2.Timing.Number of Data Points = "10" RB2 Point Collection Array 2.Point Collection Type = "0" RB2 Point Collection Array 2.Fitting = "" RB2 Point Collection Array 2.Digitizer Name = "Digitizer" RB2 Point Collection Array 2.Digitizer Points = " " RB2 Point Collection Array 2.Reference Sensor Name = "" RB2 Point Collection Array 2.Reference Sensor Points = " " RB2 Point Collection Array 3.Linkage.Linked? = "FALSE" RB2 Point Collection Array 3.Linkage.Linked RB Name = "" RB2 Point Collection Array 3.Linkage.Linked Index = "0" RB2 Point Collection Array 3.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 3.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 3.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 3.Timing.Number of Data Points = "10" RB2 Point Collection Array 3.Point Collection Type = "0" RB2 Point Collection Array 3.Fitting = "" RB2 Point Collection Array 3.Digitizer Name = "Digitizer" RB2 Point Collection Array 3.Digitizer Points = " " RB2 Point Collection Array 3.Reference Sensor Name = "" RB2 Point Collection Array 3.Reference Sensor Points = " " RB2 Point Collection Array 4.Linkage.Linked? = "FALSE" RB2 Point Collection Array 4.Linkage.Linked RB Name = "" RB2 Point Collection Array 4.Linkage.Linked Index = "0" RB2 Point Collection Array 4.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 4.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 4.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 4.Timing.Number of Data Points = "10" RB2 Point Collection Array 4.Point Collection Type = "0" RB2 Point Collection Array 4.Fitting = "" RB2 Point Collection Array 4.Digitizer Name = "Digitizer" RB2 Point Collection Array 4.Digitizer Points = " " RB2 Point Collection Array 4.Reference Sensor Name = "" RB2 Point Collection Array 4.Reference Sensor Points = " " RB2 Point Collection Array 5.Linkage.Linked? = "FALSE" RB2 Point Collection Array 5.Linkage.Linked RB Name = "" RB2 Point Collection Array 5.Linkage.Linked Index = "0" RB2 Point Collection Array 5.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 5.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 5.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 5.Timing.Number of Data Points = "10" RB2 Point Collection Array 5.Point Collection Type = "0" RB2 Point Collection Array 5.Fitting = "" RB2 Point Collection Array 5.Digitizer Name = "Digitizer" RB2 Point Collection Array 5.Digitizer Points = " " RB2 Point Collection Array 5.Reference Sensor Name = "" RB2 Point Collection Array 5.Reference Sensor Points = " " RB2 Point Collection Array 6.Linkage.Linked? = "FALSE" RB2 Point Collection Array 6.Linkage.Linked RB Name = "" RB2 Point Collection Array 6.Linkage.Linked Index = "0" RB2 Point Collection Array 6.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 6.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 6.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 6.Timing.Number of Data Points = "10" RB2 Point Collection Array 6.Point Collection Type = "0" RB2 Point Collection Array 6.Fitting = "" RB2 Point Collection Array 6.Digitizer Name = "Digitizer" RB2 Point Collection Array 6.Digitizer Points = " " RB2 Point Collection Array 6.Reference Sensor Name = "" RB2 Point Collection Array 6.Reference Sensor Points = " " RB2 Point Collection Array 7.Linkage.Linked? = "FALSE" RB2 Point Collection Array 7.Linkage.Linked RB Name = "" RB2 Point Collection Array 7.Linkage.Linked Index = "0" RB2 Point Collection Array 7.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 7.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 7.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 7.Timing.Number of Data Points = "10" RB2 Point Collection Array 7.Point Collection Type = "0" RB2 Point Collection Array 7.Fitting = "" RB2 Point Collection Array 7.Digitizer Name = "Digitizer" RB2 Point Collection Array 7.Digitizer Points = " " RB2 Point Collection Array 7.Reference Sensor Name = "" RB2 Point Collection Array 7.Reference Sensor Points = " " RB2 Point Collection Array 8.Linkage.Linked? = "FALSE" RB2 Point Collection Array 8.Linkage.Linked RB Name = "" RB2 Point Collection Array 8.Linkage.Linked Index = "0" RB2 Point Collection Array 8.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 8.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 8.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 8.Timing.Number of Data Points = "10" RB2 Point Collection Array 8.Point Collection Type = "0" RB2 Point Collection Array 8.Fitting = "" RB2 Point Collection Array 8.Digitizer Name = "Digitizer" RB2 Point Collection Array 8.Digitizer Points = " " RB2 Point Collection Array 8.Reference Sensor Name = "" RB2 Point Collection Array 8.Reference Sensor Points = " " RB2 Point Collection Array 9.Linkage.Linked? = "FALSE" RB2 Point Collection Array 9.Linkage.Linked RB Name = "" RB2 Point Collection Array 9.Linkage.Linked Index = "0" RB2 Point Collection Array 9.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 9.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 9.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 9.Timing.Number of Data Points = "10" RB2 Point Collection Array 9.Point Collection Type = "0" RB2 Point Collection Array 9.Fitting = "" RB2 Point Collection Array 9.Digitizer Name = "Digitizer" RB2 Point Collection Array 9.Digitizer Points = " " RB2 Point Collection Array 9.Reference Sensor Name = "" RB2 Point Collection Array 9.Reference Sensor Points = " " RB2 Point Collection Array 10.Linkage.Linked? = "FALSE" RB2 Point Collection Array 10.Linkage.Linked RB Name = "" RB2 Point Collection Array 10.Linkage.Linked Index = "0" RB2 Point Collection Array 10.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 10.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 10.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 10.Timing.Number of Data Points = "10" RB2 Point Collection Array 10.Point Collection Type = "0" RB2 Point Collection Array 10.Fitting = "" RB2 Point Collection Array 10.Digitizer Name = "Digitizer" RB2 Point Collection Array 10.Digitizer Points = " " RB2 Point Collection Array 10.Reference Sensor Name = "" RB2 Point Collection Array 10.Reference Sensor Points = " " RB2 Point Collection Array 11.Linkage.Linked? = "FALSE" RB2 Point Collection Array 11.Linkage.Linked RB Name = "" RB2 Point Collection Array 11.Linkage.Linked Index = "0" RB2 Point Collection Array 11.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 11.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 11.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 11.Timing.Number of Data Points = "10" RB2 Point Collection Array 11.Point Collection Type = "0" RB2 Point Collection Array 11.Fitting = "" RB2 Point Collection Array 11.Digitizer Name = "Digitizer" RB2 Point Collection Array 11.Digitizer Points = " " RB2 Point Collection Array 11.Reference Sensor Name = "" RB2 Point Collection Array 11.Reference Sensor Points = " " RB2 Point Collection Array 12.Linkage.Linked? = "FALSE" RB2 Point Collection Array 12.Linkage.Linked RB Name = "" RB2 Point Collection Array 12.Linkage.Linked Index = "0" RB2 Point Collection Array 12.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 12.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 12.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 12.Timing.Number of Data Points = "10" RB2 Point Collection Array 12.Point Collection Type = "0" RB2 Point Collection Array 12.Fitting = "" RB2 Point Collection Array 12.Digitizer Name = "Digitizer" RB2 Point Collection Array 12.Digitizer Points = " " RB2 Point Collection Array 12.Reference Sensor Name = "" RB2 Point Collection Array 12.Reference Sensor Points = " " RB2 Point Collection Array 13.Linkage.Linked? = "FALSE" RB2 Point Collection Array 13.Linkage.Linked RB Name = "" RB2 Point Collection Array 13.Linkage.Linked Index = "0" RB2 Point Collection Array 13.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 13.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 13.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 13.Timing.Number of Data Points = "10" RB2 Point Collection Array 13.Point Collection Type = "0" RB2 Point Collection Array 13.Fitting = "" RB2 Point Collection Array 13.Digitizer Name = "Digitizer" RB2 Point Collection Array 13.Digitizer Points = " " RB2 Point Collection Array 13.Reference Sensor Name = "" RB2 Point Collection Array 13.Reference Sensor Points = " " RB1 Fid Pt Collection Array. = "3" RB1 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 0.Point Collection Type = "0" RB1 Fid Pt Collection Array 0.Fitting = "" RB1 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 0.Digitizer Points = " " RB1 Fid Pt Collection Array 0.Reference Sensor Name = "" RB1 Fid Pt Collection Array 0.Reference Sensor Points = " " RB1 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 1.Point Collection Type = "0" RB1 Fid Pt Collection Array 1.Fitting = "" RB1 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 1.Digitizer Points = " " RB1 Fid Pt Collection Array 1.Reference Sensor Name = "" RB1 Fid Pt Collection Array 1.Reference Sensor Points = " " RB1 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 2.Point Collection Type = "0" RB1 Fid Pt Collection Array 2.Fitting = "" RB1 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 2.Digitizer Points = " " RB1 Fid Pt Collection Array 2.Reference Sensor Name = "" RB1 Fid Pt Collection Array 2.Reference Sensor Points = " " RB2 Fid Pt Collection Array. = "3" RB2 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 0.Point Collection Type = "0" RB2 Fid Pt Collection Array 0.Fitting = "" RB2 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 0.Digitizer Points = " " RB2 Fid Pt Collection Array 0.Reference Sensor Name = "" RB2 Fid Pt Collection Array 0.Reference Sensor Points = " " RB2 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 1.Point Collection Type = "0" RB2 Fid Pt Collection Array 1.Fitting = "" RB2 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 1.Digitizer Points = " " RB2 Fid Pt Collection Array 1.Reference Sensor Name = "" RB2 Fid Pt Collection Array 1.Reference Sensor Points = " " RB2 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 2.Point Collection Type = "0" RB2 Fid Pt Collection Array 2.Fitting = "" RB2 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 2.Digitizer Points = " " RB2 Fid Pt Collection Array 2.Reference Sensor Name = "" RB2 Fid Pt Collection Array 2.Reference Sensor Points = " " Rigid Body 1 CS Definition Name = "" Rigid Body 2 CS Definition Name = "Left Forcep" [Forceps Left LC2REF] Version = "2.3.1.0.0" Class = "Surgical Tool Load Cell 2 REF.lvclass" Name = "Forceps Left LC2REF" Description = "This is the default 6-DOF position state using a single sensor" Notes = "This state is the relative position of two rigid bodies given the position in space of a position sensors. It stores the relative (static) relationship between the rigid bodies and the sensor and then given the sensor position it can calculate the relative positions. The position sensor in the included sensor array is the relative rigid body (rigid body 2) and the x, y, z, roll, pitch, yaw relationship is the position of the rigid body 2 relative to he fixed rigid body 1. Input and output units are expected to be mm and deg.\0A\0AThis state assumes that Rigid Body 1 is static and Rigid Body 2 is dynamic. This is a requirement to be able to measure relative position with a single sensor. This state does NOT assume that the digitizer for the point collection is in the same reference frame as the position sensor. However, it does assume that the digitizer is in the WORLD1 reference frame. In other words, the static Rigid Body (rigid body 1) and the digitizer are in the same World frame. Digitization of Rigid Body 2 will be done in the World1 reference frame (since that is what the digitizer operates in) but the T_World1_World2 matrix will need to be utilized to calculate the T_Sensor2_RB2 matrix." Channel Names. = "6" Channel Names 0 = "x" Channel Names 1 = "y" Channel Names 2 = "z" Channel Names 3 = "roll" Channel Names 4 = "pitch" Channel Names 5 = "yaw" Channel Units. = "6" Channel Units 0 = "mm" Channel Units 1 = "mm" Channel Units 2 = "mm" Channel Units 3 = "deg" Channel Units 4 = "deg" Channel Units 5 = "deg" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "1" Included Sensors 0 = "Left Forcep Pos" Included States. = "0" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Surgical Tool Load Cell 2 REF" Data Description Parameters.Data Name = "Forceps Left LC2REF" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Forceps Left LC2REF" Enable State = "TRUE" Collected Points Rigid Body 1 (m) = " " Collected Points Rigid Body 1 Position Sensor (m,rad) = " " Collected Points Rigid Body 2 (m) = " 1.0807701416 0.6637453003 0.0308972435 1.0586618652 0.6673767700 0.0295956726 1.0256383057 0.6517671509 0.0281294575 1.0513123779 0.6639667358 0.0290151711 1.0371580811 0.6895184937 0.1572482910 1.0413885498 0.6887432251 0.1541227875 1.0524244385 0.6968480225 0.1385099335 1.0495742187 0.6891358643 0.1478511200" Collected Points Rigid Body 2 Position Sensor (m,rad) = " 1.0723443604 0.6799334106 0.0458317337 -0.0893718329 -0.8525727400 -0.0564595894 1.0722424316 0.6783023682 0.0466128693 -0.0497681766 -0.8518873090 -0.0943930484 1.0429664307 0.6463272705 0.0462174606 -0.0560995799 -0.8502587860 0.3836610786 1.0433070068 0.6465662842 0.0462128525 -0.0567395126 -0.8485204076 0.3649901223 1.0772535400 0.6818865356 0.1499019775 0.1773797112 0.5423187674 -0.0779353786 1.0760893555 0.6765613403 0.1478841248 0.1857278058 0.5101988475 0.0226125201 1.0833950195 0.6757557983 0.1502315216 0.2381064087 0.5972981635 -0.0867415702 1.0885811768 0.6759992676 0.1518710480 0.2638444958 0.6649788073 -0.1626572907" Position Offset (m,rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T_Sensor1_RB1 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_Sensor2_RB2 = " 0.0034056451 0.8005440590 0.5992642249 -0.0144911446 0.9986497195 0.0283420753 -0.0435369332 0.0001824884 -0.0518376249 0.5986033214 -0.7993665769 -0.0222665589 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Collected Point Names - Rigid Body 1. = "0" Collected Point Names - Rigid Body 2. = "8" Collected Point Names - Rigid Body 2 0 = "ForcepsLeftHandleDiv01" Collected Point Names - Rigid Body 2 1 = "ForcepsLeftHandleDiv02" Collected Point Names - Rigid Body 2 2 = "ForcepsLeftHandleDiv03" Collected Point Names - Rigid Body 2 3 = "ForcepsLeftHandleDiv04" Collected Point Names - Rigid Body 2 4 = "ForcepsLeftHandleDiv05" Collected Point Names - Rigid Body 2 5 = "ForcepsLeftHandleDiv06" Collected Point Names - Rigid Body 2 6 = "ForcepsLeftHandleDiv07" Collected Point Names - Rigid Body 2 7 = "ForcepsLeftHandleDiv08" Collected Point Images - Rigid Body 1. = "3" Collected Point Images - Rigid Body 1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Point Images - Rigid Body 1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Point Images - Rigid Body 1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Point Images - Rigid Body 2. = "8" Collected Point Images - Rigid Body 2 0 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsLeftHandleDiv01.png" Collected Point Images - Rigid Body 2 1 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsLeftHandleDiv02.png" Collected Point Images - Rigid Body 2 2 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsLeftHandleDiv03.png" Collected Point Images - Rigid Body 2 3 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsLeftHandleDiv04.png" Collected Point Images - Rigid Body 2 4 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsLeftHandleDiv05.png" Collected Point Images - Rigid Body 2 5 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsLeftHandleDiv06.png" Collected Point Images - Rigid Body 2 6 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsLeftHandleDiv07.png" Collected Point Images - Rigid Body 2 7 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsLeftHandleDiv08.png" T_World1_World2 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Rigid Body 1 Name = "World" Rigid Body 2 Name = "Left Forcep LC" Initial Collected Points Rigid Body 1 (m) = " " Initial Collected Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Fiducials Enabled RB1 = "FALSE" Fiducials Enabled RB2 = "FALSE" Fiducial Type RB1 = "Manual Digitization" Fiducial Type RB2 = "Manual Digitization" Rigid Body 1 Fiducial Sensor Name = "" Rigid Body 2 Fiducial Sensor Name = "" Rigid Body 1 Number of Fiducials = "0.0000000000" Rigid Body 2 Number of Fiducials = "0.0000000000" Initial Manual Fiducial Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Manual Fiducial Points Rigid Body 1 (m) = " " Final Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 2 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 2 (m, rady) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T RB1-OPT_RB1-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T RB2-OPT_RB2-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_World1_World2 for Fiducials = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen1_RB1 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen2_RB2 = " 0.0034056451 0.8005440590 0.5992642249 -0.0144911446 0.9986497195 0.0283420753 -0.0435369332 0.0001824884 -0.0518376249 0.5986033214 -0.7993665769 -0.0222665589 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Digitization Phase = "Final" Collected 6-DOF Fiducial Point Images - RB1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Images - RB2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Names - RB1. = "0" Collected Manual Fiducial Point Names - RB2. = "0" Collected Manual Fiducial Point Images - RB1. = "3" Collected Manual Fiducial Point Images - RB1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2. = "3" Collected Manual Fiducial Point Images - RB2 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Names - RB1 = "" Collected 6-DOF Fiducial Point Names - RB2 = "" RB1 Point Collection Array. = "0" RB2 Point Collection Array. = "8" RB2 Point Collection Array 0.Linkage.Linked? = "FALSE" RB2 Point Collection Array 0.Linkage.Linked RB Name = "" RB2 Point Collection Array 0.Linkage.Linked Index = "0" RB2 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 0.Timing.Number of Data Points = "10" RB2 Point Collection Array 0.Point Collection Type = "0" RB2 Point Collection Array 0.Fitting = "" RB2 Point Collection Array 0.Digitizer Name = "Digitizer" RB2 Point Collection Array 0.Digitizer Points = " " RB2 Point Collection Array 0.Reference Sensor Name = "" RB2 Point Collection Array 0.Reference Sensor Points = " " RB2 Point Collection Array 1.Linkage.Linked? = "FALSE" RB2 Point Collection Array 1.Linkage.Linked RB Name = "" RB2 Point Collection Array 1.Linkage.Linked Index = "0" RB2 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 1.Timing.Number of Data Points = "10" RB2 Point Collection Array 1.Point Collection Type = "0" RB2 Point Collection Array 1.Fitting = "" RB2 Point Collection Array 1.Digitizer Name = "Digitizer" RB2 Point Collection Array 1.Digitizer Points = " " RB2 Point Collection Array 1.Reference Sensor Name = "" RB2 Point Collection Array 1.Reference Sensor Points = " " RB2 Point Collection Array 2.Linkage.Linked? = "FALSE" RB2 Point Collection Array 2.Linkage.Linked RB Name = "" RB2 Point Collection Array 2.Linkage.Linked Index = "0" RB2 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 2.Timing.Number of Data Points = "10" RB2 Point Collection Array 2.Point Collection Type = "0" RB2 Point Collection Array 2.Fitting = "" RB2 Point Collection Array 2.Digitizer Name = "Digitizer" RB2 Point Collection Array 2.Digitizer Points = " " RB2 Point Collection Array 2.Reference Sensor Name = "" RB2 Point Collection Array 2.Reference Sensor Points = " " RB2 Point Collection Array 3.Linkage.Linked? = "FALSE" RB2 Point Collection Array 3.Linkage.Linked RB Name = "" RB2 Point Collection Array 3.Linkage.Linked Index = "0" RB2 Point Collection Array 3.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 3.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 3.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 3.Timing.Number of Data Points = "10" RB2 Point Collection Array 3.Point Collection Type = "0" RB2 Point Collection Array 3.Fitting = "" RB2 Point Collection Array 3.Digitizer Name = "Digitizer" RB2 Point Collection Array 3.Digitizer Points = " " RB2 Point Collection Array 3.Reference Sensor Name = "" RB2 Point Collection Array 3.Reference Sensor Points = " " RB2 Point Collection Array 4.Linkage.Linked? = "FALSE" RB2 Point Collection Array 4.Linkage.Linked RB Name = "" RB2 Point Collection Array 4.Linkage.Linked Index = "0" RB2 Point Collection Array 4.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 4.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 4.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 4.Timing.Number of Data Points = "10" RB2 Point Collection Array 4.Point Collection Type = "0" RB2 Point Collection Array 4.Fitting = "" RB2 Point Collection Array 4.Digitizer Name = "Digitizer" RB2 Point Collection Array 4.Digitizer Points = " " RB2 Point Collection Array 4.Reference Sensor Name = "" RB2 Point Collection Array 4.Reference Sensor Points = " " RB2 Point Collection Array 5.Linkage.Linked? = "FALSE" RB2 Point Collection Array 5.Linkage.Linked RB Name = "" RB2 Point Collection Array 5.Linkage.Linked Index = "0" RB2 Point Collection Array 5.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 5.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 5.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 5.Timing.Number of Data Points = "10" RB2 Point Collection Array 5.Point Collection Type = "0" RB2 Point Collection Array 5.Fitting = "" RB2 Point Collection Array 5.Digitizer Name = "Digitizer" RB2 Point Collection Array 5.Digitizer Points = " " RB2 Point Collection Array 5.Reference Sensor Name = "" RB2 Point Collection Array 5.Reference Sensor Points = " " RB2 Point Collection Array 6.Linkage.Linked? = "FALSE" RB2 Point Collection Array 6.Linkage.Linked RB Name = "" RB2 Point Collection Array 6.Linkage.Linked Index = "0" RB2 Point Collection Array 6.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 6.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 6.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 6.Timing.Number of Data Points = "10" RB2 Point Collection Array 6.Point Collection Type = "0" RB2 Point Collection Array 6.Fitting = "" RB2 Point Collection Array 6.Digitizer Name = "Digitizer" RB2 Point Collection Array 6.Digitizer Points = " " RB2 Point Collection Array 6.Reference Sensor Name = "" RB2 Point Collection Array 6.Reference Sensor Points = " " RB2 Point Collection Array 7.Linkage.Linked? = "FALSE" RB2 Point Collection Array 7.Linkage.Linked RB Name = "" RB2 Point Collection Array 7.Linkage.Linked Index = "0" RB2 Point Collection Array 7.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 7.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 7.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 7.Timing.Number of Data Points = "10" RB2 Point Collection Array 7.Point Collection Type = "0" RB2 Point Collection Array 7.Fitting = "" RB2 Point Collection Array 7.Digitizer Name = "Digitizer" RB2 Point Collection Array 7.Digitizer Points = " " RB2 Point Collection Array 7.Reference Sensor Name = "" RB2 Point Collection Array 7.Reference Sensor Points = " " RB1 Fid Pt Collection Array. = "3" RB1 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 0.Point Collection Type = "0" RB1 Fid Pt Collection Array 0.Fitting = "" RB1 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 0.Digitizer Points = " " RB1 Fid Pt Collection Array 0.Reference Sensor Name = "" RB1 Fid Pt Collection Array 0.Reference Sensor Points = " " RB1 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 1.Point Collection Type = "0" RB1 Fid Pt Collection Array 1.Fitting = "" RB1 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 1.Digitizer Points = " " RB1 Fid Pt Collection Array 1.Reference Sensor Name = "" RB1 Fid Pt Collection Array 1.Reference Sensor Points = " " RB1 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 2.Point Collection Type = "0" RB1 Fid Pt Collection Array 2.Fitting = "" RB1 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 2.Digitizer Points = " " RB1 Fid Pt Collection Array 2.Reference Sensor Name = "" RB1 Fid Pt Collection Array 2.Reference Sensor Points = " " RB2 Fid Pt Collection Array. = "3" RB2 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 0.Point Collection Type = "0" RB2 Fid Pt Collection Array 0.Fitting = "" RB2 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 0.Digitizer Points = " " RB2 Fid Pt Collection Array 0.Reference Sensor Name = "" RB2 Fid Pt Collection Array 0.Reference Sensor Points = " " RB2 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 1.Point Collection Type = "0" RB2 Fid Pt Collection Array 1.Fitting = "" RB2 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 1.Digitizer Points = " " RB2 Fid Pt Collection Array 1.Reference Sensor Name = "" RB2 Fid Pt Collection Array 1.Reference Sensor Points = " " RB2 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 2.Point Collection Type = "0" RB2 Fid Pt Collection Array 2.Fitting = "" RB2 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 2.Digitizer Points = " " RB2 Fid Pt Collection Array 2.Reference Sensor Name = "" RB2 Fid Pt Collection Array 2.Reference Sensor Points = " " Rigid Body 1 CS Definition Name = "" Rigid Body 2 CS Definition Name = "" Gravity Compensation = "FALSE" 6-DOF Load Sensor - Rigid Body = "Rigid Body 2" Dynamic Load Transformation = "FALSE" Divot Points in LC Frame = " -0.0143550000 0.0082920000 0.0028760000 -0.0120890000 0.0072440000 -0.0211760000 0.0110210000 0.0088050000 -0.0211760000 0.0129610000 0.0103570000 0.0028760000 0.0000080968 -0.0141000000 -0.0211760000 0.0096890000 -0.0102510000 -0.0211760000 0.0113950000 -0.0120570000 0.0028760000 0.0000080981 -0.0165850000 0.0028760000" [Forceps Left Load] Version = "2.0" Class = "Surgical Tool 6 DOF Load.lvclass" Name = "Forceps Left Load" Description = "This is the default 6-DOF load state" Notes = "This state is the 6-DOF loads acting on a rigid body given a 6-DOF Position state describing the position of said rigid body with respect to the position of a 6-DOF load cell and the load cell sensor output. It can transform the loads to the rigid body coordinate system with or without gravity compensation. Input and output units are expected to be mm and deg and N and Nm.\0AWhen performing the static loads transform the state needs to be appropriately formulated." Channel Names. = "6" Channel Names 0 = "Fx" Channel Names 1 = "Fy" Channel Names 2 = "Fz" Channel Names 3 = "Mx" Channel Names 4 = "My" Channel Names 5 = "Mz" Channel Units. = "6" Channel Units 0 = "N" Channel Units 1 = "N" Channel Units 2 = "N" Channel Units 3 = "Nm" Channel Units 4 = "Nm" Channel Units 5 = "Nm" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "1" Included Sensors 0 = "Left Forcep LC" Included States. = "2" Included States 0 = "Forceps Left LC2REF" Included States 1 = "Forceps Left" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Surgical Tool 6 DOF Load" Data Description Parameters.Data Name = "Forceps Left Load" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Forceps Left Load" Enable State = "TRUE" Gravity Vector = " 0.0000000000 0.0000000000 -1.0000000000" Gravity Compensation = "FALSE" Inertial Compensation = "FALSE" 6-DOF Load Sensor - Rigid Body = "Rigid Body 2" Load Cell Offsets (N, Nm) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Center of Mass in Load Cell CS (mm) = " 0.0000000000 0.0000000000 0.0000000000" Load Cell Mass (N) = "0.0000000000" Load Cell Data Array = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Dynamic Load Transformation = "FALSE" Static Transformation Matrix- T_REF_LOAD = " 0.2011197127 0.9705750900 -0.1324192429 0.0220916073 0.9724668908 -0.2140753975 -0.0920862119 0.0249663933 -0.1177242854 -0.1102529769 -0.9869069225 0.0630774360 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Gravity Compensation Library Configuration File Path = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Classes/State/6-DOF/6-DOF Load/Gravity_Compensation_Library.ini" Gravity Compensation Type = "" [Forceps Right] Version = "2.3" Class = "Surgical Tool Position.lvclass" Name = "Forceps Right" Description = "This is the position state for the Ultrasound Probe" Notes = "This is the position state that defines the relative relationship between a bone and the Ultrasound Probe. Rigid Body 1 is the bone and rigid body 2 is the coordinate system as defined by the ultrasound probe." Channel Names. = "6" Channel Names 0 = "x" Channel Names 1 = "y" Channel Names 2 = "z" Channel Names 3 = "roll" Channel Names 4 = "pitch" Channel Names 5 = "yaw" Channel Units. = "6" Channel Units 0 = "mm" Channel Units 1 = "mm" Channel Units 2 = "mm" Channel Units 3 = "deg" Channel Units 4 = "deg" Channel Units 5 = "deg" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "2" Included Sensors 0 = "Femur" Included Sensors 1 = "Right Forcep Pos" Included States. = "0" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Surgical Tool Position" Data Description Parameters.Data Name = "Forceps Right" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Forceps Right" Enable State = "TRUE" Collected Points Rigid Body 1 (m) = " 0.8098500366 0.4765617371 0.1202015686 0.8130097656 0.3951024780 0.1287006378 1.2546713867 0.4252901306 0.1662164154 1.2920426025 0.4256895142 0.1372024841 1.2398444824 0.4360792542 0.1011189346 1.2336650391 0.4284200134 0.1582896118" Collected Points Rigid Body 1 Position Sensor (m,rad) = " 1.2743641357 0.5254555054 0.1577446442 1.1889727960 -0.7727368298 2.9731703515 1.2744483643 0.5255729980 0.1578283997 1.1884582733 -0.7723162501 2.9720456986 1.2742990723 0.5254907837 0.1577628174 1.1898267386 -0.7734403704 2.9727900521 1.2742718506 0.5255087280 0.1577700195 1.1887747900 -0.7734998254 2.9719255900 1.2740421143 0.5255019531 0.1577745819 1.1896517690 -0.7737301889 2.9723967032 1.2741342773 0.5254696655 0.1577571411 1.1897488412 -0.7735054181 2.9727855247" Collected Points Rigid Body 2 (m) = " 1.0747171631 0.6427844238 0.0078444090 1.0653118896 0.6196499023 0.0213357697 1.0118956299 0.6798900146 0.0329365273" Collected Points Rigid Body 2 Position Sensor (m,rad) = " 1.0432033691 0.5745231323 0.0482026939 -0.0221183684 -0.8424386132 0.8391931519 1.0423903809 0.5707839966 0.0479574585 -0.0005847180 -0.8227409416 0.7107538194 1.0092353516 0.5910492554 0.0579356651 -0.0296985322 -0.5917175094 -1.2185747637" Position Offset (m,rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T_Sensor1_RB1 = " -0.0345200751 -0.7307291107 -0.6817942000 0.2927516112 0.5310051288 -0.5913505905 0.6069085865 -0.2459303416 -0.8466651744 -0.3410856870 0.4084343723 -0.2780039980 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_Sensor2_RB2 = " 0.7051834821 0.1839056680 -0.6847590539 0.0177062965 -0.1989782493 0.9782962797 0.0578277218 0.0239278713 0.6805320807 0.0954730035 0.7264716049 -0.0799716095 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Collected Point Names - Rigid Body 1. = "6" Collected Point Names - Rigid Body 1 0 = "Lateral Femoral Epicondyle" Collected Point Names - Rigid Body 1 1 = "Medial Femoral Epicondyle" Collected Point Names - Rigid Body 1 2 = "Femoral Head Point 1" Collected Point Names - Rigid Body 1 3 = "Femoral Head Point 2" Collected Point Names - Rigid Body 1 4 = "Femoral Head Point 3" Collected Point Names - Rigid Body 1 5 = "Femoral Head Point 4" Collected Point Names - Rigid Body 2. = "3" Collected Point Names - Rigid Body 2 0 = "Tip" Collected Point Names - Rigid Body 2 1 = "Elbow" Collected Point Names - Rigid Body 2 2 = "Handle End" Collected Point Images - Rigid Body 1. = "6" Collected Point Images - Rigid Body 1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/RKnee_LFE.jpg" Collected Point Images - Rigid Body 1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/RKnee_MFE.jpg" Collected Point Images - Rigid Body 1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt1.JPG" Collected Point Images - Rigid Body 1 3 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt2.JPG" Collected Point Images - Rigid Body 1 4 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt3.JPG" Collected Point Images - Rigid Body 1 5 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt4.JPG" Collected Point Images - Rigid Body 2. = "3" Collected Point Images - Rigid Body 2 0 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationForceps/forcepsRightTip.jpg" Collected Point Images - Rigid Body 2 1 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationForceps/forcepsRightElbow.jpg" Collected Point Images - Rigid Body 2 2 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationForceps/forcepsRightHandle.jpg" T_World1_World2 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Rigid Body 1 Name = "Femur" Rigid Body 2 Name = "Right Forcep" Initial Collected Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Collected Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Fiducials Enabled RB1 = "FALSE" Fiducials Enabled RB2 = "FALSE" Fiducial Type RB1 = "Manual Digitization" Fiducial Type RB2 = "Manual Digitization" Rigid Body 1 Fiducial Sensor Name = "" Rigid Body 2 Fiducial Sensor Name = "" Rigid Body 1 Number of Fiducials = "0.0000000000" Rigid Body 2 Number of Fiducials = "0.0000000000" Initial Manual Fiducial Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Manual Fiducial Points Rigid Body 1 (m) = " " Final Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 2 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 2 (m, rady) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T RB1-OPT_RB1-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T RB2-OPT_RB2-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_World1_World2 for Fiducials = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen1_RB1 = " -0.0345200751 -0.7307291107 -0.6817942000 0.2927516112 0.5310051288 -0.5913505905 0.6069085865 -0.2459303416 -0.8466651744 -0.3410856870 0.4084343723 -0.2780039980 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen2_RB2 = " 0.7051834821 0.1839056680 -0.6847590539 0.0177062965 -0.1989782493 0.9782962797 0.0578277218 0.0239278713 0.6805320807 0.0954730035 0.7264716049 -0.0799716095 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Digitization Phase = "Final" Collected 6-DOF Fiducial Point Images - RB1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Images - RB2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Names - RB1. = "0" Collected Manual Fiducial Point Names - RB2. = "0" Collected Manual Fiducial Point Images - RB1. = "3" Collected Manual Fiducial Point Images - RB1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2. = "3" Collected Manual Fiducial Point Images - RB2 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Names - RB1 = "" Collected 6-DOF Fiducial Point Names - RB2 = "" RB1 Point Collection Array. = "6" RB1 Point Collection Array 0.Linkage.Linked? = "FALSE" RB1 Point Collection Array 0.Linkage.Linked RB Name = "" RB1 Point Collection Array 0.Linkage.Linked Index = "0" RB1 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 0.Timing.Number of Data Points = "10" RB1 Point Collection Array 0.Point Collection Type = "0" RB1 Point Collection Array 0.Fitting = "" RB1 Point Collection Array 0.Digitizer Name = "Digitizer" RB1 Point Collection Array 0.Digitizer Points = " " RB1 Point Collection Array 0.Reference Sensor Name = "" RB1 Point Collection Array 0.Reference Sensor Points = " " RB1 Point Collection Array 1.Linkage.Linked? = "FALSE" RB1 Point Collection Array 1.Linkage.Linked RB Name = "" RB1 Point Collection Array 1.Linkage.Linked Index = "0" RB1 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 1.Timing.Number of Data Points = "10" RB1 Point Collection Array 1.Point Collection Type = "0" RB1 Point Collection Array 1.Fitting = "" RB1 Point Collection Array 1.Digitizer Name = "Digitizer" RB1 Point Collection Array 1.Digitizer Points = " " RB1 Point Collection Array 1.Reference Sensor Name = "" RB1 Point Collection Array 1.Reference Sensor Points = " " RB1 Point Collection Array 2.Linkage.Linked? = "FALSE" RB1 Point Collection Array 2.Linkage.Linked RB Name = "" RB1 Point Collection Array 2.Linkage.Linked Index = "0" RB1 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 2.Timing.Number of Data Points = "10" RB1 Point Collection Array 2.Point Collection Type = "0" RB1 Point Collection Array 2.Fitting = "" RB1 Point Collection Array 2.Digitizer Name = "Digitizer" RB1 Point Collection Array 2.Digitizer Points = " " RB1 Point Collection Array 2.Reference Sensor Name = "" RB1 Point Collection Array 2.Reference Sensor Points = " " RB1 Point Collection Array 3.Linkage.Linked? = "FALSE" RB1 Point Collection Array 3.Linkage.Linked RB Name = "" RB1 Point Collection Array 3.Linkage.Linked Index = "0" RB1 Point Collection Array 3.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 3.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 3.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 3.Timing.Number of Data Points = "10" RB1 Point Collection Array 3.Point Collection Type = "0" RB1 Point Collection Array 3.Fitting = "" RB1 Point Collection Array 3.Digitizer Name = "Digitizer" RB1 Point Collection Array 3.Digitizer Points = " " RB1 Point Collection Array 3.Reference Sensor Name = "" RB1 Point Collection Array 3.Reference Sensor Points = " " RB1 Point Collection Array 4.Linkage.Linked? = "FALSE" RB1 Point Collection Array 4.Linkage.Linked RB Name = "" RB1 Point Collection Array 4.Linkage.Linked Index = "0" RB1 Point Collection Array 4.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 4.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 4.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 4.Timing.Number of Data Points = "10" RB1 Point Collection Array 4.Point Collection Type = "0" RB1 Point Collection Array 4.Fitting = "" RB1 Point Collection Array 4.Digitizer Name = "Digitizer" RB1 Point Collection Array 4.Digitizer Points = " " RB1 Point Collection Array 4.Reference Sensor Name = "" RB1 Point Collection Array 4.Reference Sensor Points = " " RB1 Point Collection Array 5.Linkage.Linked? = "FALSE" RB1 Point Collection Array 5.Linkage.Linked RB Name = "" RB1 Point Collection Array 5.Linkage.Linked Index = "0" RB1 Point Collection Array 5.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 5.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 5.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 5.Timing.Number of Data Points = "10" RB1 Point Collection Array 5.Point Collection Type = "0" RB1 Point Collection Array 5.Fitting = "" RB1 Point Collection Array 5.Digitizer Name = "Digitizer" RB1 Point Collection Array 5.Digitizer Points = " " RB1 Point Collection Array 5.Reference Sensor Name = "" RB1 Point Collection Array 5.Reference Sensor Points = " " RB2 Point Collection Array. = "14" RB2 Point Collection Array 0.Linkage.Linked? = "FALSE" RB2 Point Collection Array 0.Linkage.Linked RB Name = "" RB2 Point Collection Array 0.Linkage.Linked Index = "0" RB2 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 0.Timing.Number of Data Points = "10" RB2 Point Collection Array 0.Point Collection Type = "0" RB2 Point Collection Array 0.Fitting = "" RB2 Point Collection Array 0.Digitizer Name = "Digitizer" RB2 Point Collection Array 0.Digitizer Points = " " RB2 Point Collection Array 0.Reference Sensor Name = "" RB2 Point Collection Array 0.Reference Sensor Points = " " RB2 Point Collection Array 1.Linkage.Linked? = "FALSE" RB2 Point Collection Array 1.Linkage.Linked RB Name = "" RB2 Point Collection Array 1.Linkage.Linked Index = "0" RB2 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 1.Timing.Number of Data Points = "10" RB2 Point Collection Array 1.Point Collection Type = "0" RB2 Point Collection Array 1.Fitting = "" RB2 Point Collection Array 1.Digitizer Name = "Digitizer" RB2 Point Collection Array 1.Digitizer Points = " " RB2 Point Collection Array 1.Reference Sensor Name = "" RB2 Point Collection Array 1.Reference Sensor Points = " " RB2 Point Collection Array 2.Linkage.Linked? = "FALSE" RB2 Point Collection Array 2.Linkage.Linked RB Name = "" RB2 Point Collection Array 2.Linkage.Linked Index = "0" RB2 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 2.Timing.Number of Data Points = "10" RB2 Point Collection Array 2.Point Collection Type = "0" RB2 Point Collection Array 2.Fitting = "" RB2 Point Collection Array 2.Digitizer Name = "Digitizer" RB2 Point Collection Array 2.Digitizer Points = " " RB2 Point Collection Array 2.Reference Sensor Name = "" RB2 Point Collection Array 2.Reference Sensor Points = " " RB2 Point Collection Array 3.Linkage.Linked? = "FALSE" RB2 Point Collection Array 3.Linkage.Linked RB Name = "" RB2 Point Collection Array 3.Linkage.Linked Index = "0" RB2 Point Collection Array 3.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 3.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 3.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 3.Timing.Number of Data Points = "10" RB2 Point Collection Array 3.Point Collection Type = "0" RB2 Point Collection Array 3.Fitting = "" RB2 Point Collection Array 3.Digitizer Name = "Digitizer" RB2 Point Collection Array 3.Digitizer Points = " " RB2 Point Collection Array 3.Reference Sensor Name = "" RB2 Point Collection Array 3.Reference Sensor Points = " " RB2 Point Collection Array 4.Linkage.Linked? = "FALSE" RB2 Point Collection Array 4.Linkage.Linked RB Name = "" RB2 Point Collection Array 4.Linkage.Linked Index = "0" RB2 Point Collection Array 4.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 4.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 4.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 4.Timing.Number of Data Points = "10" RB2 Point Collection Array 4.Point Collection Type = "0" RB2 Point Collection Array 4.Fitting = "" RB2 Point Collection Array 4.Digitizer Name = "Digitizer" RB2 Point Collection Array 4.Digitizer Points = " " RB2 Point Collection Array 4.Reference Sensor Name = "" RB2 Point Collection Array 4.Reference Sensor Points = " " RB2 Point Collection Array 5.Linkage.Linked? = "FALSE" RB2 Point Collection Array 5.Linkage.Linked RB Name = "" RB2 Point Collection Array 5.Linkage.Linked Index = "0" RB2 Point Collection Array 5.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 5.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 5.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 5.Timing.Number of Data Points = "10" RB2 Point Collection Array 5.Point Collection Type = "0" RB2 Point Collection Array 5.Fitting = "" RB2 Point Collection Array 5.Digitizer Name = "Digitizer" RB2 Point Collection Array 5.Digitizer Points = " " RB2 Point Collection Array 5.Reference Sensor Name = "" RB2 Point Collection Array 5.Reference Sensor Points = " " RB2 Point Collection Array 6.Linkage.Linked? = "FALSE" RB2 Point Collection Array 6.Linkage.Linked RB Name = "" RB2 Point Collection Array 6.Linkage.Linked Index = "0" RB2 Point Collection Array 6.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 6.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 6.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 6.Timing.Number of Data Points = "10" RB2 Point Collection Array 6.Point Collection Type = "0" RB2 Point Collection Array 6.Fitting = "" RB2 Point Collection Array 6.Digitizer Name = "Digitizer" RB2 Point Collection Array 6.Digitizer Points = " " RB2 Point Collection Array 6.Reference Sensor Name = "" RB2 Point Collection Array 6.Reference Sensor Points = " " RB2 Point Collection Array 7.Linkage.Linked? = "FALSE" RB2 Point Collection Array 7.Linkage.Linked RB Name = "" RB2 Point Collection Array 7.Linkage.Linked Index = "0" RB2 Point Collection Array 7.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 7.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 7.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 7.Timing.Number of Data Points = "10" RB2 Point Collection Array 7.Point Collection Type = "0" RB2 Point Collection Array 7.Fitting = "" RB2 Point Collection Array 7.Digitizer Name = "Digitizer" RB2 Point Collection Array 7.Digitizer Points = " " RB2 Point Collection Array 7.Reference Sensor Name = "" RB2 Point Collection Array 7.Reference Sensor Points = " " RB2 Point Collection Array 8.Linkage.Linked? = "FALSE" RB2 Point Collection Array 8.Linkage.Linked RB Name = "" RB2 Point Collection Array 8.Linkage.Linked Index = "0" RB2 Point Collection Array 8.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 8.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 8.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 8.Timing.Number of Data Points = "10" RB2 Point Collection Array 8.Point Collection Type = "0" RB2 Point Collection Array 8.Fitting = "" RB2 Point Collection Array 8.Digitizer Name = "Digitizer" RB2 Point Collection Array 8.Digitizer Points = " " RB2 Point Collection Array 8.Reference Sensor Name = "" RB2 Point Collection Array 8.Reference Sensor Points = " " RB2 Point Collection Array 9.Linkage.Linked? = "FALSE" RB2 Point Collection Array 9.Linkage.Linked RB Name = "" RB2 Point Collection Array 9.Linkage.Linked Index = "0" RB2 Point Collection Array 9.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 9.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 9.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 9.Timing.Number of Data Points = "10" RB2 Point Collection Array 9.Point Collection Type = "0" RB2 Point Collection Array 9.Fitting = "" RB2 Point Collection Array 9.Digitizer Name = "Digitizer" RB2 Point Collection Array 9.Digitizer Points = " " RB2 Point Collection Array 9.Reference Sensor Name = "" RB2 Point Collection Array 9.Reference Sensor Points = " " RB2 Point Collection Array 10.Linkage.Linked? = "FALSE" RB2 Point Collection Array 10.Linkage.Linked RB Name = "" RB2 Point Collection Array 10.Linkage.Linked Index = "0" RB2 Point Collection Array 10.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 10.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 10.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 10.Timing.Number of Data Points = "10" RB2 Point Collection Array 10.Point Collection Type = "0" RB2 Point Collection Array 10.Fitting = "" RB2 Point Collection Array 10.Digitizer Name = "Digitizer" RB2 Point Collection Array 10.Digitizer Points = " " RB2 Point Collection Array 10.Reference Sensor Name = "" RB2 Point Collection Array 10.Reference Sensor Points = " " RB2 Point Collection Array 11.Linkage.Linked? = "FALSE" RB2 Point Collection Array 11.Linkage.Linked RB Name = "" RB2 Point Collection Array 11.Linkage.Linked Index = "0" RB2 Point Collection Array 11.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 11.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 11.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 11.Timing.Number of Data Points = "10" RB2 Point Collection Array 11.Point Collection Type = "0" RB2 Point Collection Array 11.Fitting = "" RB2 Point Collection Array 11.Digitizer Name = "Digitizer" RB2 Point Collection Array 11.Digitizer Points = " " RB2 Point Collection Array 11.Reference Sensor Name = "" RB2 Point Collection Array 11.Reference Sensor Points = " " RB2 Point Collection Array 12.Linkage.Linked? = "FALSE" RB2 Point Collection Array 12.Linkage.Linked RB Name = "" RB2 Point Collection Array 12.Linkage.Linked Index = "0" RB2 Point Collection Array 12.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 12.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 12.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 12.Timing.Number of Data Points = "10" RB2 Point Collection Array 12.Point Collection Type = "0" RB2 Point Collection Array 12.Fitting = "" RB2 Point Collection Array 12.Digitizer Name = "Digitizer" RB2 Point Collection Array 12.Digitizer Points = " " RB2 Point Collection Array 12.Reference Sensor Name = "" RB2 Point Collection Array 12.Reference Sensor Points = " " RB2 Point Collection Array 13.Linkage.Linked? = "FALSE" RB2 Point Collection Array 13.Linkage.Linked RB Name = "" RB2 Point Collection Array 13.Linkage.Linked Index = "0" RB2 Point Collection Array 13.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 13.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 13.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 13.Timing.Number of Data Points = "10" RB2 Point Collection Array 13.Point Collection Type = "0" RB2 Point Collection Array 13.Fitting = "" RB2 Point Collection Array 13.Digitizer Name = "Digitizer" RB2 Point Collection Array 13.Digitizer Points = " " RB2 Point Collection Array 13.Reference Sensor Name = "" RB2 Point Collection Array 13.Reference Sensor Points = " " RB1 Fid Pt Collection Array. = "3" RB1 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 0.Point Collection Type = "0" RB1 Fid Pt Collection Array 0.Fitting = "" RB1 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 0.Digitizer Points = " " RB1 Fid Pt Collection Array 0.Reference Sensor Name = "" RB1 Fid Pt Collection Array 0.Reference Sensor Points = " " RB1 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 1.Point Collection Type = "0" RB1 Fid Pt Collection Array 1.Fitting = "" RB1 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 1.Digitizer Points = " " RB1 Fid Pt Collection Array 1.Reference Sensor Name = "" RB1 Fid Pt Collection Array 1.Reference Sensor Points = " " RB1 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 2.Point Collection Type = "0" RB1 Fid Pt Collection Array 2.Fitting = "" RB1 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 2.Digitizer Points = " " RB1 Fid Pt Collection Array 2.Reference Sensor Name = "" RB1 Fid Pt Collection Array 2.Reference Sensor Points = " " RB2 Fid Pt Collection Array. = "3" RB2 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 0.Point Collection Type = "0" RB2 Fid Pt Collection Array 0.Fitting = "" RB2 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 0.Digitizer Points = " " RB2 Fid Pt Collection Array 0.Reference Sensor Name = "" RB2 Fid Pt Collection Array 0.Reference Sensor Points = " " RB2 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 1.Point Collection Type = "0" RB2 Fid Pt Collection Array 1.Fitting = "" RB2 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 1.Digitizer Points = " " RB2 Fid Pt Collection Array 1.Reference Sensor Name = "" RB2 Fid Pt Collection Array 1.Reference Sensor Points = " " RB2 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 2.Point Collection Type = "0" RB2 Fid Pt Collection Array 2.Fitting = "" RB2 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 2.Digitizer Points = " " RB2 Fid Pt Collection Array 2.Reference Sensor Name = "" RB2 Fid Pt Collection Array 2.Reference Sensor Points = " " Rigid Body 1 CS Definition Name = "" Rigid Body 2 CS Definition Name = "Right Forcep" [Forceps Right LC2REF] Version = "2.3.1.0.0" Class = "Surgical Tool Load Cell 2 REF.lvclass" Name = "Forceps Right LC2REF" Description = "This is the default 6-DOF position state using a single sensor" Notes = "This state is the relative position of two rigid bodies given the position in space of a position sensors. It stores the relative (static) relationship between the rigid bodies and the sensor and then given the sensor position it can calculate the relative positions. The position sensor in the included sensor array is the relative rigid body (rigid body 2) and the x, y, z, roll, pitch, yaw relationship is the position of the rigid body 2 relative to he fixed rigid body 1. Input and output units are expected to be mm and deg.\0A\0AThis state assumes that Rigid Body 1 is static and Rigid Body 2 is dynamic. This is a requirement to be able to measure relative position with a single sensor. This state does NOT assume that the digitizer for the point collection is in the same reference frame as the position sensor. However, it does assume that the digitizer is in the WORLD1 reference frame. In other words, the static Rigid Body (rigid body 1) and the digitizer are in the same World frame. Digitization of Rigid Body 2 will be done in the World1 reference frame (since that is what the digitizer operates in) but the T_World1_World2 matrix will need to be utilized to calculate the T_Sensor2_RB2 matrix." Channel Names. = "6" Channel Names 0 = "x" Channel Names 1 = "y" Channel Names 2 = "z" Channel Names 3 = "roll" Channel Names 4 = "pitch" Channel Names 5 = "yaw" Channel Units. = "6" Channel Units 0 = "mm" Channel Units 1 = "mm" Channel Units 2 = "mm" Channel Units 3 = "deg" Channel Units 4 = "deg" Channel Units 5 = "deg" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "1" Included Sensors 0 = "Right Forcep Pos" Included States. = "0" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Surgical Tool Load Cell 2 REF" Data Description Parameters.Data Name = "Forceps Right LC2REF" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Forceps Right LC2REF" Enable State = "TRUE" Collected Points Rigid Body 1 (m) = " " Collected Points Rigid Body 1 Position Sensor (m,rad) = " " Collected Points Rigid Body 2 (m) = " 1.0518114014 0.6225487061 0.0319447289 1.0377774658 0.6035946045 0.0310374203 1.0431591797 0.6046636353 0.0319428787 1.0709224854 0.6091159668 0.0319360313 1.0714504395 0.6274843140 0.1319661255 1.0491773682 0.6419050293 0.1389729156 1.0489476318 0.6374687500 0.1185304260 1.0674766846 0.6357899170 0.1205611191" Collected Points Rigid Body 2 Position Sensor (m,rad) = " 1.0580384521 0.6066572266 0.0480462112 -0.0051521608 -0.8427868880 0.9476818126 1.0551418457 0.6057854004 0.0484823723 -0.0287661657 -0.8450867274 0.8920041024 1.0537819824 0.6196301880 0.0482899361 -0.0164461131 -0.8384578531 0.2868463846 1.0542030029 0.6191347046 0.0481086655 -0.0041244506 -0.8344242293 0.2873010194 1.1111467285 0.6279233398 0.1201939697 -0.0951488701 0.6338138305 -0.0664487321 1.0848454590 0.6382661133 0.1271031189 -0.1963603100 0.6385575196 -0.4716534524 1.0869868164 0.6374438477 0.1273686142 -0.2034094477 0.6604608211 -0.4759459687 1.1084757080 0.6320711670 0.1224388046 -0.1763503329 0.6953654088 -0.2111727621" Position Offset (m,rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T_Sensor1_RB1 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_Sensor2_RB2 = " 0.0251646693 -0.8164833112 0.5768203723 -0.0149673957 -0.9988259413 0.0033567241 0.0483267149 -0.0000997008 -0.0413941830 -0.5773592772 -0.8154402410 -0.0218058276 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Collected Point Names - Rigid Body 1. = "0" Collected Point Names - Rigid Body 2. = "8" Collected Point Names - Rigid Body 2 0 = "ForcepsRightHandleDiv09" Collected Point Names - Rigid Body 2 1 = "ForcepsRightHandleDiv10" Collected Point Names - Rigid Body 2 2 = "ForcepsRightHandleDiv11" Collected Point Names - Rigid Body 2 3 = "ForcepsRightHandleDiv12" Collected Point Names - Rigid Body 2 4 = "ForcepsRightHandleDiv13" Collected Point Names - Rigid Body 2 5 = "ForcepsRightHandleDiv14" Collected Point Names - Rigid Body 2 6 = "ForcepsRightHandleDiv15" Collected Point Names - Rigid Body 2 7 = "ForcepsRightHandleDiv16" Collected Point Images - Rigid Body 1. = "3" Collected Point Images - Rigid Body 1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Point Images - Rigid Body 1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Point Images - Rigid Body 1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Point Images - Rigid Body 2. = "8" Collected Point Images - Rigid Body 2 0 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsRightHandleDiv09.png" Collected Point Images - Rigid Body 2 1 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsRightHandleDiv10.png" Collected Point Images - Rigid Body 2 2 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsRightHandleDiv11.png" Collected Point Images - Rigid Body 2 3 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsRightHandleDiv12.png" Collected Point Images - Rigid Body 2 4 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsRightHandleDiv13.png" Collected Point Images - Rigid Body 2 5 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsRightHandleDiv14.png" Collected Point Images - Rigid Body 2 6 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsRightHandleDiv15.png" Collected Point Images - Rigid Body 2 7 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ForcepsRightHandleDiv16.png" T_World1_World2 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Rigid Body 1 Name = "World" Rigid Body 2 Name = "Right Forcep LC" Initial Collected Points Rigid Body 1 (m) = " " Initial Collected Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Fiducials Enabled RB1 = "FALSE" Fiducials Enabled RB2 = "FALSE" Fiducial Type RB1 = "Manual Digitization" Fiducial Type RB2 = "Manual Digitization" Rigid Body 1 Fiducial Sensor Name = "" Rigid Body 2 Fiducial Sensor Name = "" Rigid Body 1 Number of Fiducials = "0.0000000000" Rigid Body 2 Number of Fiducials = "0.0000000000" Initial Manual Fiducial Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Manual Fiducial Points Rigid Body 1 (m) = " " Final Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 2 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 2 (m, rady) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T RB1-OPT_RB1-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T RB2-OPT_RB2-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_World1_World2 for Fiducials = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen1_RB1 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen2_RB2 = " 0.0251646693 -0.8164833112 0.5768203723 -0.0149673957 -0.9988259413 0.0033567241 0.0483267149 -0.0000997008 -0.0413941830 -0.5773592772 -0.8154402410 -0.0218058276 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Digitization Phase = "Final" Collected 6-DOF Fiducial Point Images - RB1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Images - RB2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Names - RB1. = "0" Collected Manual Fiducial Point Names - RB2. = "0" Collected Manual Fiducial Point Images - RB1. = "3" Collected Manual Fiducial Point Images - RB1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2. = "3" Collected Manual Fiducial Point Images - RB2 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Names - RB1 = "" Collected 6-DOF Fiducial Point Names - RB2 = "" RB1 Point Collection Array. = "0" RB2 Point Collection Array. = "8" RB2 Point Collection Array 0.Linkage.Linked? = "FALSE" RB2 Point Collection Array 0.Linkage.Linked RB Name = "" RB2 Point Collection Array 0.Linkage.Linked Index = "0" RB2 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 0.Timing.Number of Data Points = "10" RB2 Point Collection Array 0.Point Collection Type = "0" RB2 Point Collection Array 0.Fitting = "" RB2 Point Collection Array 0.Digitizer Name = "Digitizer" RB2 Point Collection Array 0.Digitizer Points = " " RB2 Point Collection Array 0.Reference Sensor Name = "" RB2 Point Collection Array 0.Reference Sensor Points = " " RB2 Point Collection Array 1.Linkage.Linked? = "FALSE" RB2 Point Collection Array 1.Linkage.Linked RB Name = "" RB2 Point Collection Array 1.Linkage.Linked Index = "0" RB2 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 1.Timing.Number of Data Points = "10" RB2 Point Collection Array 1.Point Collection Type = "0" RB2 Point Collection Array 1.Fitting = "" RB2 Point Collection Array 1.Digitizer Name = "Digitizer" RB2 Point Collection Array 1.Digitizer Points = " " RB2 Point Collection Array 1.Reference Sensor Name = "" RB2 Point Collection Array 1.Reference Sensor Points = " " RB2 Point Collection Array 2.Linkage.Linked? = "FALSE" RB2 Point Collection Array 2.Linkage.Linked RB Name = "" RB2 Point Collection Array 2.Linkage.Linked Index = "0" RB2 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 2.Timing.Number of Data Points = "10" RB2 Point Collection Array 2.Point Collection Type = "0" RB2 Point Collection Array 2.Fitting = "" RB2 Point Collection Array 2.Digitizer Name = "Digitizer" RB2 Point Collection Array 2.Digitizer Points = " " RB2 Point Collection Array 2.Reference Sensor Name = "" RB2 Point Collection Array 2.Reference Sensor Points = " " RB2 Point Collection Array 3.Linkage.Linked? = "FALSE" RB2 Point Collection Array 3.Linkage.Linked RB Name = "" RB2 Point Collection Array 3.Linkage.Linked Index = "0" RB2 Point Collection Array 3.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 3.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 3.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 3.Timing.Number of Data Points = "10" RB2 Point Collection Array 3.Point Collection Type = "0" RB2 Point Collection Array 3.Fitting = "" RB2 Point Collection Array 3.Digitizer Name = "Digitizer" RB2 Point Collection Array 3.Digitizer Points = " " RB2 Point Collection Array 3.Reference Sensor Name = "" RB2 Point Collection Array 3.Reference Sensor Points = " " RB2 Point Collection Array 4.Linkage.Linked? = "FALSE" RB2 Point Collection Array 4.Linkage.Linked RB Name = "" RB2 Point Collection Array 4.Linkage.Linked Index = "0" RB2 Point Collection Array 4.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 4.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 4.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 4.Timing.Number of Data Points = "10" RB2 Point Collection Array 4.Point Collection Type = "0" RB2 Point Collection Array 4.Fitting = "" RB2 Point Collection Array 4.Digitizer Name = "Digitizer" RB2 Point Collection Array 4.Digitizer Points = " " RB2 Point Collection Array 4.Reference Sensor Name = "" RB2 Point Collection Array 4.Reference Sensor Points = " " RB2 Point Collection Array 5.Linkage.Linked? = "FALSE" RB2 Point Collection Array 5.Linkage.Linked RB Name = "" RB2 Point Collection Array 5.Linkage.Linked Index = "0" RB2 Point Collection Array 5.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 5.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 5.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 5.Timing.Number of Data Points = "10" RB2 Point Collection Array 5.Point Collection Type = "0" RB2 Point Collection Array 5.Fitting = "" RB2 Point Collection Array 5.Digitizer Name = "Digitizer" RB2 Point Collection Array 5.Digitizer Points = " " RB2 Point Collection Array 5.Reference Sensor Name = "" RB2 Point Collection Array 5.Reference Sensor Points = " " RB2 Point Collection Array 6.Linkage.Linked? = "FALSE" RB2 Point Collection Array 6.Linkage.Linked RB Name = "" RB2 Point Collection Array 6.Linkage.Linked Index = "0" RB2 Point Collection Array 6.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 6.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 6.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 6.Timing.Number of Data Points = "10" RB2 Point Collection Array 6.Point Collection Type = "0" RB2 Point Collection Array 6.Fitting = "" RB2 Point Collection Array 6.Digitizer Name = "Digitizer" RB2 Point Collection Array 6.Digitizer Points = " " RB2 Point Collection Array 6.Reference Sensor Name = "" RB2 Point Collection Array 6.Reference Sensor Points = " " RB2 Point Collection Array 7.Linkage.Linked? = "FALSE" RB2 Point Collection Array 7.Linkage.Linked RB Name = "" RB2 Point Collection Array 7.Linkage.Linked Index = "0" RB2 Point Collection Array 7.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 7.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 7.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 7.Timing.Number of Data Points = "10" RB2 Point Collection Array 7.Point Collection Type = "0" RB2 Point Collection Array 7.Fitting = "" RB2 Point Collection Array 7.Digitizer Name = "Digitizer" RB2 Point Collection Array 7.Digitizer Points = " " RB2 Point Collection Array 7.Reference Sensor Name = "" RB2 Point Collection Array 7.Reference Sensor Points = " " RB1 Fid Pt Collection Array. = "3" RB1 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 0.Point Collection Type = "0" RB1 Fid Pt Collection Array 0.Fitting = "" RB1 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 0.Digitizer Points = " " RB1 Fid Pt Collection Array 0.Reference Sensor Name = "" RB1 Fid Pt Collection Array 0.Reference Sensor Points = " " RB1 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 1.Point Collection Type = "0" RB1 Fid Pt Collection Array 1.Fitting = "" RB1 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 1.Digitizer Points = " " RB1 Fid Pt Collection Array 1.Reference Sensor Name = "" RB1 Fid Pt Collection Array 1.Reference Sensor Points = " " RB1 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 2.Point Collection Type = "0" RB1 Fid Pt Collection Array 2.Fitting = "" RB1 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 2.Digitizer Points = " " RB1 Fid Pt Collection Array 2.Reference Sensor Name = "" RB1 Fid Pt Collection Array 2.Reference Sensor Points = " " RB2 Fid Pt Collection Array. = "3" RB2 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 0.Point Collection Type = "0" RB2 Fid Pt Collection Array 0.Fitting = "" RB2 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 0.Digitizer Points = " " RB2 Fid Pt Collection Array 0.Reference Sensor Name = "" RB2 Fid Pt Collection Array 0.Reference Sensor Points = " " RB2 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 1.Point Collection Type = "0" RB2 Fid Pt Collection Array 1.Fitting = "" RB2 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 1.Digitizer Points = " " RB2 Fid Pt Collection Array 1.Reference Sensor Name = "" RB2 Fid Pt Collection Array 1.Reference Sensor Points = " " RB2 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 2.Point Collection Type = "0" RB2 Fid Pt Collection Array 2.Fitting = "" RB2 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 2.Digitizer Points = " " RB2 Fid Pt Collection Array 2.Reference Sensor Name = "" RB2 Fid Pt Collection Array 2.Reference Sensor Points = " " Rigid Body 1 CS Definition Name = "" Rigid Body 2 CS Definition Name = "" Gravity Compensation = "FALSE" 6-DOF Load Sensor - Rigid Body = "Rigid Body 2" Dynamic Load Transformation = "FALSE" Divot Points in LC Frame = " -0.0143550000 -0.0082920000 0.0028760000 -0.0120890000 -0.0072440000 -0.0211760000 0.0110210000 -0.0088050000 -0.0211760000 0.0129610000 -0.0103570000 0.0028760000 0.0000080968 0.0141000000 -0.0211760000 0.0096890000 0.0102510000 -0.0211760000 0.0113950000 0.0120570000 0.0028760000 0.0000080981 0.0165850000 0.0028760000" [Forceps Right Load] Version = "2.0" Class = "Surgical Tool 6 DOF Load.lvclass" Name = "Forceps Right Load" Description = "This is the default 6-DOF load state" Notes = "This state is the 6-DOF loads acting on a rigid body given a 6-DOF Position state describing the position of said rigid body with respect to the position of a 6-DOF load cell and the load cell sensor output. It can transform the loads to the rigid body coordinate system with or without gravity compensation. Input and output units are expected to be mm and deg and N and Nm.\0AWhen performing the static loads transform the state needs to be appropriately formulated." Channel Names. = "6" Channel Names 0 = "Fx" Channel Names 1 = "Fy" Channel Names 2 = "Fz" Channel Names 3 = "Mx" Channel Names 4 = "My" Channel Names 5 = "Mz" Channel Units. = "6" Channel Units 0 = "N" Channel Units 1 = "N" Channel Units 2 = "N" Channel Units 3 = "Nm" Channel Units 4 = "Nm" Channel Units 5 = "Nm" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "1" Included Sensors 0 = "Right Forcep LC" Included States. = "2" Included States 0 = "Forceps Right LC2REF" Included States 1 = "Forceps Right" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Surgical Tool 6 DOF Load" Data Description Parameters.Data Name = "Forceps Right Load" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Forceps Right Load" Enable State = "TRUE" Gravity Vector = " 0.0000000000 0.0000000000 -1.0000000000" Gravity Compensation = "FALSE" Inertial Compensation = "FALSE" 6-DOF Load Sensor - Rigid Body = "Rigid Body 2" Load Cell Offsets (N, Nm) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Center of Mass in Load Cell CS (mm) = " 0.0000000000 0.0000000000 0.0000000000" Load Cell Mass (N) = "0.0000000000" Load Cell Data Array = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Dynamic Load Transformation = "FALSE" Static Transformation Matrix- T_REF_LOAD = " 0.1883202768 -0.9693499698 -0.1577850103 0.0213236968 -0.9764718041 -0.2019942624 0.0755058523 -0.0239616997 -0.1050632624 0.1398533307 -0.9845825292 0.0632399357 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Gravity Compensation Library Configuration File Path = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Classes/State/6-DOF/6-DOF Load/Gravity_Compensation_Library.ini" Gravity Compensation Type = "" [Left wrt Right Forcep] Version = "2.3" Class = "simVITRO-Generic.lvlib:Generic JCS.lvclass" Name = "Left wrt Right Forcep" Description = "This is the default 6-DOF Generic CS state" Notes = "This state is the relative position of two rigid bodies given the position in space of 2 position sensors. It stores the relative (static) relationship between the rigid bodies and the sensors and then given each sensor position it can calculate the relative motion. The first position sensor in the included sensor array is the base rigid body (rigid body 1) and the x, y, z, roll, pitch, yaw relationship is the position of rigid body 2 relative to rigid body 1. Input and output units are expected to be mm and deg." Channel Names. = "6" Channel Names 0 = "x" Channel Names 1 = "y" Channel Names 2 = "z" Channel Names 3 = "roll" Channel Names 4 = "pitch" Channel Names 5 = "yaw" Channel Units. = "6" Channel Units 0 = "mm" Channel Units 1 = "mm" Channel Units 2 = "mm" Channel Units 3 = "deg" Channel Units 4 = "deg" Channel Units 5 = "deg" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "2" Included Sensors 0 = "Right Forcep Pos" Included Sensors 1 = "Left Forcep Pos" Included States. = "0" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Generic JCS" Data Description Parameters.Data Name = "Left wrt Right Forcep" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Left wrt Right Forcep" Enable State = "TRUE" Collected Points Rigid Body 1 (m) = " 1.0747171631 0.6427844238 0.0078444090 1.0653118896 0.6196499023 0.0213357697 1.0118956299 0.6798900146 0.0329365273" Collected Points Rigid Body 1 Position Sensor (m,rad) = " 1.0432033691 0.5745231323 0.0482026939 -0.0221183684 -0.8424386132 0.8391931519 1.0423903809 0.5707839966 0.0479574585 -0.0005847180 -0.8227409416 0.7107538194 1.0092353516 0.5910492554 0.0579356651 -0.0296985322 -0.5917175094 -1.2185747637" Collected Points Rigid Body 2 (m) = " 1.0402641602 0.6282924194 0.0073961434 1.0201282349 0.6167994385 0.0234285583 0.9230564575 0.5382841187 0.0053964925" Collected Points Rigid Body 2 Position Sensor (m,rad) = " 0.9654497070 0.6099094849 0.0460065231 -0.0468963027 -0.8474673271 0.6133583565 0.9648420410 0.6094056396 0.0459141159 -0.0522445877 -0.8447198104 0.5900461095 0.9681463013 0.6074755249 0.0463293343 -0.0402556523 -0.8267721020 0.5613277122" Position Offset (m,rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T_Sensor1_RB1 = " 0.7051834821 0.1839056680 -0.6847590539 0.0177062965 -0.1989782493 0.9782962797 0.0578277218 0.0239278713 0.6805320807 0.0954730035 0.7264716049 -0.0799716095 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_Sensor2_RB2 = " 0.6983189495 -0.2232488829 -0.6800813048 0.0185533718 0.2341213847 0.9690955980 -0.0777232221 -0.0242818696 0.6764154212 -0.1049459780 0.7290051575 -0.0805733164 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Collected Point Names - Rigid Body 1. = "3" Collected Point Names - Rigid Body 1 0 = "Tip" Collected Point Names - Rigid Body 1 1 = "Elbow" Collected Point Names - Rigid Body 1 2 = "Handle End" Collected Point Names - Rigid Body 2. = "3" Collected Point Names - Rigid Body 2 0 = "Tip" Collected Point Names - Rigid Body 2 1 = "Elbow" Collected Point Names - Rigid Body 2 2 = "Handle End" Collected Point Images - Rigid Body 1. = "3" Collected Point Images - Rigid Body 1 0 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationForceps/forcepsRightTip.jpg" Collected Point Images - Rigid Body 1 1 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationForceps/forcepsRightElbow.jpg" Collected Point Images - Rigid Body 1 2 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationForceps/forcepsRightHandle.jpg" Collected Point Images - Rigid Body 2. = "3" Collected Point Images - Rigid Body 2 0 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationForceps/forcepsLeftTip.jpg" Collected Point Images - Rigid Body 2 1 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationForceps/forcepsLeftElbow.jpg" Collected Point Images - Rigid Body 2 2 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationForceps/forcepsLeftHandle.jpg" T_World1_World2 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Rigid Body 1 Name = "Right Forcep" Rigid Body 2 Name = "Left Forcep" Initial Collected Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Collected Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Fiducials Enabled RB1 = "FALSE" Fiducials Enabled RB2 = "FALSE" Fiducial Type RB1 = "Manual Digitization" Fiducial Type RB2 = "Manual Digitization" Rigid Body 1 Fiducial Sensor Name = "" Rigid Body 2 Fiducial Sensor Name = "" Rigid Body 1 Number of Fiducials = "0.0000000000" Rigid Body 2 Number of Fiducials = "0.0000000000" Initial Manual Fiducial Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Manual Fiducial Points Rigid Body 1 (m) = " " Final Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 2 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 2 (m, rady) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T RB1-OPT_RB1-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T RB2-OPT_RB2-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_World1_World2 for Fiducials = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen1_RB1 = " 0.7051834821 0.1839056680 -0.6847590539 0.0177062965 -0.1989782493 0.9782962797 0.0578277218 0.0239278713 0.6805320807 0.0954730035 0.7264716049 -0.0799716095 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen2_RB2 = " 0.6983189495 -0.2232488829 -0.6800813048 0.0185533718 0.2341213847 0.9690955980 -0.0777232221 -0.0242818696 0.6764154212 -0.1049459780 0.7290051575 -0.0805733164 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Digitization Phase = "Final" Collected 6-DOF Fiducial Point Images - RB1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Images - RB2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Names - RB1. = "0" Collected Manual Fiducial Point Names - RB2. = "0" Collected Manual Fiducial Point Images - RB1. = "3" Collected Manual Fiducial Point Images - RB1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2. = "3" Collected Manual Fiducial Point Images - RB2 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Names - RB1 = "" Collected 6-DOF Fiducial Point Names - RB2 = "" RB1 Point Collection Array. = "3" RB1 Point Collection Array 0.Linkage.Linked? = "FALSE" RB1 Point Collection Array 0.Linkage.Linked RB Name = "" RB1 Point Collection Array 0.Linkage.Linked Index = "0" RB1 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 0.Timing.Number of Data Points = "10" RB1 Point Collection Array 0.Point Collection Type = "0" RB1 Point Collection Array 0.Fitting = "" RB1 Point Collection Array 0.Digitizer Name = "Digitizer" RB1 Point Collection Array 0.Digitizer Points = " " RB1 Point Collection Array 0.Reference Sensor Name = "" RB1 Point Collection Array 0.Reference Sensor Points = " " RB1 Point Collection Array 1.Linkage.Linked? = "FALSE" RB1 Point Collection Array 1.Linkage.Linked RB Name = "" RB1 Point Collection Array 1.Linkage.Linked Index = "0" RB1 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 1.Timing.Number of Data Points = "10" RB1 Point Collection Array 1.Point Collection Type = "0" RB1 Point Collection Array 1.Fitting = "" RB1 Point Collection Array 1.Digitizer Name = "Digitizer" RB1 Point Collection Array 1.Digitizer Points = " " RB1 Point Collection Array 1.Reference Sensor Name = "" RB1 Point Collection Array 1.Reference Sensor Points = " " RB1 Point Collection Array 2.Linkage.Linked? = "FALSE" RB1 Point Collection Array 2.Linkage.Linked RB Name = "" RB1 Point Collection Array 2.Linkage.Linked Index = "0" RB1 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 2.Timing.Number of Data Points = "10" RB1 Point Collection Array 2.Point Collection Type = "0" RB1 Point Collection Array 2.Fitting = "" RB1 Point Collection Array 2.Digitizer Name = "Digitizer" RB1 Point Collection Array 2.Digitizer Points = " " RB1 Point Collection Array 2.Reference Sensor Name = "" RB1 Point Collection Array 2.Reference Sensor Points = " " RB2 Point Collection Array. = "3" RB2 Point Collection Array 0.Linkage.Linked? = "FALSE" RB2 Point Collection Array 0.Linkage.Linked RB Name = "" RB2 Point Collection Array 0.Linkage.Linked Index = "0" RB2 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 0.Timing.Number of Data Points = "10" RB2 Point Collection Array 0.Point Collection Type = "0" RB2 Point Collection Array 0.Fitting = "" RB2 Point Collection Array 0.Digitizer Name = "Digitizer" RB2 Point Collection Array 0.Digitizer Points = " " RB2 Point Collection Array 0.Reference Sensor Name = "" RB2 Point Collection Array 0.Reference Sensor Points = " " RB2 Point Collection Array 1.Linkage.Linked? = "FALSE" RB2 Point Collection Array 1.Linkage.Linked RB Name = "" RB2 Point Collection Array 1.Linkage.Linked Index = "0" RB2 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 1.Timing.Number of Data Points = "10" RB2 Point Collection Array 1.Point Collection Type = "0" RB2 Point Collection Array 1.Fitting = "" RB2 Point Collection Array 1.Digitizer Name = "Digitizer" RB2 Point Collection Array 1.Digitizer Points = " " RB2 Point Collection Array 1.Reference Sensor Name = "" RB2 Point Collection Array 1.Reference Sensor Points = " " RB2 Point Collection Array 2.Linkage.Linked? = "FALSE" RB2 Point Collection Array 2.Linkage.Linked RB Name = "" RB2 Point Collection Array 2.Linkage.Linked Index = "0" RB2 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 2.Timing.Number of Data Points = "10" RB2 Point Collection Array 2.Point Collection Type = "0" RB2 Point Collection Array 2.Fitting = "" RB2 Point Collection Array 2.Digitizer Name = "Digitizer" RB2 Point Collection Array 2.Digitizer Points = " " RB2 Point Collection Array 2.Reference Sensor Name = "" RB2 Point Collection Array 2.Reference Sensor Points = " " RB1 Fid Pt Collection Array. = "3" RB1 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 0.Point Collection Type = "0" RB1 Fid Pt Collection Array 0.Fitting = "" RB1 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 0.Digitizer Points = " " RB1 Fid Pt Collection Array 0.Reference Sensor Name = "" RB1 Fid Pt Collection Array 0.Reference Sensor Points = " " RB1 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 1.Point Collection Type = "0" RB1 Fid Pt Collection Array 1.Fitting = "" RB1 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 1.Digitizer Points = " " RB1 Fid Pt Collection Array 1.Reference Sensor Name = "" RB1 Fid Pt Collection Array 1.Reference Sensor Points = " " RB1 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 2.Point Collection Type = "0" RB1 Fid Pt Collection Array 2.Fitting = "" RB1 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 2.Digitizer Points = " " RB1 Fid Pt Collection Array 2.Reference Sensor Name = "" RB1 Fid Pt Collection Array 2.Reference Sensor Points = " " RB2 Fid Pt Collection Array. = "3" RB2 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 0.Point Collection Type = "0" RB2 Fid Pt Collection Array 0.Fitting = "" RB2 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 0.Digitizer Points = " " RB2 Fid Pt Collection Array 0.Reference Sensor Name = "" RB2 Fid Pt Collection Array 0.Reference Sensor Points = " " RB2 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 1.Point Collection Type = "0" RB2 Fid Pt Collection Array 1.Fitting = "" RB2 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 1.Digitizer Points = " " RB2 Fid Pt Collection Array 1.Reference Sensor Name = "" RB2 Fid Pt Collection Array 1.Reference Sensor Points = " " RB2 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 2.Point Collection Type = "0" RB2 Fid Pt Collection Array 2.Fitting = "" RB2 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 2.Digitizer Points = " " RB2 Fid Pt Collection Array 2.Reference Sensor Name = "" RB2 Fid Pt Collection Array 2.Reference Sensor Points = " " Rigid Body 1 CS Definition Name = "Right Forcep" Rigid Body 2 CS Definition Name = "Left Forcep" [Probe] Version = "2.3" Class = "Surgical Tool Position.lvclass" Name = "Probe" Description = "This is the position state for the Ultrasound Probe" Notes = "This is the position state that defines the relative relationship between a bone and the Ultrasound Probe. Rigid Body 1 is the bone and rigid body 2 is the coordinate system as defined by the ultrasound probe." Channel Names. = "6" Channel Names 0 = "x" Channel Names 1 = "y" Channel Names 2 = "z" Channel Names 3 = "roll" Channel Names 4 = "pitch" Channel Names 5 = "yaw" Channel Units. = "6" Channel Units 0 = "mm" Channel Units 1 = "mm" Channel Units 2 = "mm" Channel Units 3 = "deg" Channel Units 4 = "deg" Channel Units 5 = "deg" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "2" Included Sensors 0 = "Femur" Included Sensors 1 = "Scalpel Pos" Included States. = "0" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Surgical Tool Position" Data Description Parameters.Data Name = "Probe" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Probe" Enable State = "TRUE" Collected Points Rigid Body 1 (m) = " 0.8098500366 0.4765617371 0.1202015686 0.8130097656 0.3951024780 0.1287006378 1.2546713867 0.4252901306 0.1662164154 1.2920426025 0.4256895142 0.1372024841 1.2398444824 0.4360792542 0.1011189346 1.2336650391 0.4284200134 0.1582896118" Collected Points Rigid Body 1 Position Sensor (m,rad) = " 1.2743641357 0.5254555054 0.1577446442 1.1889727960 -0.7727368298 2.9731703515 1.2744483643 0.5255729980 0.1578283997 1.1884582733 -0.7723162501 2.9720456986 1.2742990723 0.5254907837 0.1577628174 1.1898267386 -0.7734403704 2.9727900521 1.2742718506 0.5255087280 0.1577700195 1.1887747900 -0.7734998254 2.9719255900 1.2740421143 0.5255019531 0.1577745819 1.1896517690 -0.7737301889 2.9723967032 1.2741342773 0.5254696655 0.1577571411 1.1897488412 -0.7735054181 2.9727855247" Collected Points Rigid Body 2 (m) = " 0.9878476563 0.7112971191 0.0895190964 0.9129089966 0.6469709473 0.0986433182 0.9266846924 0.6708052979 0.0954517441 0.9052725830 0.6281892090 0.0874775314 1.0191752930 0.6844911499 0.1461428070 1.0166764526 0.6881265869 0.1447675934 1.0181393433 0.6873766479 0.1466498108 1.0185104370 0.6868289185 0.1470759583 1.0015938110 0.6847578735 0.1722799225 1.0344636230 0.6996398315 0.1486255341" Collected Points Rigid Body 2 Position Sensor (m,rad) = " 0.9851478882 0.6440230713 0.1364482269 0.2115257641 -0.7479270874 1.2619412794 0.9845952759 0.6268130493 0.1382494812 0.3223501835 -0.8370381885 2.5148925259 0.9829465332 0.6299053955 0.1377840118 0.2914581140 -0.7928475576 2.1937575095 0.9709002075 0.6115045776 0.1363268433 0.1918085017 -0.7299720553 2.7079988691 1.0635030518 0.6906392822 0.0731459808 3.1135263978 -0.6999349272 0.2332118682 1.0597562256 0.6971948853 0.0734437943 3.0825602259 -0.7115297313 0.4004094990 1.0600126953 0.6946939697 0.0728470688 3.0969420948 -0.6937693098 0.3084244476 1.0599959717 0.6948092651 0.0728656616 3.0979319917 -0.6942008084 0.3118361234 1.0192630005 0.6765676880 0.1661507263 2.8444698960 -1.2045874421 -0.0853321588 1.0561529541 0.7035093384 0.1885888672 -0.0125552961 -0.8203770533 -0.1405552507" Position Offset (m,rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T_Sensor1_RB1 = " -0.0345200751 -0.7307291107 -0.6817942000 0.2927516112 0.5310051288 -0.5913505905 0.6069085865 -0.2459303416 -0.8466651744 -0.3410856870 0.4084343723 -0.2780039980 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_Sensor2_RB2 = " 0.7532872165 -0.1492522591 -0.6405326944 0.0153918652 0.1482228337 0.9873809288 -0.0557574480 -0.0015925331 0.6407716918 -0.0529401983 0.7659040243 -0.0824517928 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Collected Point Names - Rigid Body 1. = "6" Collected Point Names - Rigid Body 1 0 = "Lateral Femoral Epicondyle" Collected Point Names - Rigid Body 1 1 = "Medial Femoral Epicondyle" Collected Point Names - Rigid Body 1 2 = "Femoral Head Point 1" Collected Point Names - Rigid Body 1 3 = "Femoral Head Point 2" Collected Point Names - Rigid Body 1 4 = "Femoral Head Point 3" Collected Point Names - Rigid Body 1 5 = "Femoral Head Point 4" Collected Point Names - Rigid Body 2. = "10" Collected Point Names - Rigid Body 2 0 = "Origin_1" Collected Point Names - Rigid Body 2 1 = "Origin_2" Collected Point Names - Rigid Body 2 2 = "Origin_3" Collected Point Names - Rigid Body 2 3 = "Origin_4" Collected Point Names - Rigid Body 2 4 = "Origin_5" Collected Point Names - Rigid Body 2 5 = "Origin_6" Collected Point Names - Rigid Body 2 6 = "Origin_7" Collected Point Names - Rigid Body 2 7 = "Origin_8" Collected Point Names - Rigid Body 2 8 = "Flag" Collected Point Names - Rigid Body 2 9 = "Cylinder End" Collected Point Images - Rigid Body 1. = "6" Collected Point Images - Rigid Body 1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/RKnee_LFE.jpg" Collected Point Images - Rigid Body 1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/RKnee_MFE.jpg" Collected Point Images - Rigid Body 1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt1.JPG" Collected Point Images - Rigid Body 1 3 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt2.JPG" Collected Point Images - Rigid Body 1 4 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt3.JPG" Collected Point Images - Rigid Body 1 5 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt4.JPG" Collected Point Images - Rigid Body 2. = "10" Collected Point Images - Rigid Body 2 0 = "" Collected Point Images - Rigid Body 2 1 = "" Collected Point Images - Rigid Body 2 2 = "" Collected Point Images - Rigid Body 2 3 = "" Collected Point Images - Rigid Body 2 4 = "" Collected Point Images - Rigid Body 2 5 = "" Collected Point Images - Rigid Body 2 6 = "" Collected Point Images - Rigid Body 2 7 = "" Collected Point Images - Rigid Body 2 8 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationScalpel/scalpelFlag.jpg" Collected Point Images - Rigid Body 2 9 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationScalpel/scalpelCyl.jpg" T_World1_World2 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Rigid Body 1 Name = "Femur" Rigid Body 2 Name = "Probe" Initial Collected Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Collected Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Fiducials Enabled RB1 = "FALSE" Fiducials Enabled RB2 = "FALSE" Fiducial Type RB1 = "Manual Digitization" Fiducial Type RB2 = "Manual Digitization" Rigid Body 1 Fiducial Sensor Name = "" Rigid Body 2 Fiducial Sensor Name = "" Rigid Body 1 Number of Fiducials = "0.0000000000" Rigid Body 2 Number of Fiducials = "0.0000000000" Initial Manual Fiducial Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Manual Fiducial Points Rigid Body 1 (m) = " " Final Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 2 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 2 (m, rady) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T RB1-OPT_RB1-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T RB2-OPT_RB2-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_World1_World2 for Fiducials = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen1_RB1 = " -0.0345200751 -0.7307291107 -0.6817942000 0.2927516112 0.5310051288 -0.5913505905 0.6069085865 -0.2459303416 -0.8466651744 -0.3410856870 0.4084343723 -0.2780039980 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen2_RB2 = " 0.7532872165 -0.1492522591 -0.6405326944 0.0153918652 0.1482228337 0.9873809288 -0.0557574480 -0.0015925331 0.6407716918 -0.0529401983 0.7659040243 -0.0824517928 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Digitization Phase = "Final" Collected 6-DOF Fiducial Point Images - RB1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Images - RB2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Names - RB1. = "0" Collected Manual Fiducial Point Names - RB2. = "0" Collected Manual Fiducial Point Images - RB1. = "3" Collected Manual Fiducial Point Images - RB1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2. = "3" Collected Manual Fiducial Point Images - RB2 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Names - RB1 = "" Collected 6-DOF Fiducial Point Names - RB2 = "" RB1 Point Collection Array. = "6" RB1 Point Collection Array 0.Linkage.Linked? = "FALSE" RB1 Point Collection Array 0.Linkage.Linked RB Name = "" RB1 Point Collection Array 0.Linkage.Linked Index = "0" RB1 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 0.Timing.Number of Data Points = "10" RB1 Point Collection Array 0.Point Collection Type = "0" RB1 Point Collection Array 0.Fitting = "" RB1 Point Collection Array 0.Digitizer Name = "Digitizer" RB1 Point Collection Array 0.Digitizer Points = " " RB1 Point Collection Array 0.Reference Sensor Name = "" RB1 Point Collection Array 0.Reference Sensor Points = " " RB1 Point Collection Array 1.Linkage.Linked? = "FALSE" RB1 Point Collection Array 1.Linkage.Linked RB Name = "" RB1 Point Collection Array 1.Linkage.Linked Index = "0" RB1 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 1.Timing.Number of Data Points = "10" RB1 Point Collection Array 1.Point Collection Type = "0" RB1 Point Collection Array 1.Fitting = "" RB1 Point Collection Array 1.Digitizer Name = "Digitizer" RB1 Point Collection Array 1.Digitizer Points = " " RB1 Point Collection Array 1.Reference Sensor Name = "" RB1 Point Collection Array 1.Reference Sensor Points = " " RB1 Point Collection Array 2.Linkage.Linked? = "FALSE" RB1 Point Collection Array 2.Linkage.Linked RB Name = "" RB1 Point Collection Array 2.Linkage.Linked Index = "0" RB1 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 2.Timing.Number of Data Points = "10" RB1 Point Collection Array 2.Point Collection Type = "0" RB1 Point Collection Array 2.Fitting = "" RB1 Point Collection Array 2.Digitizer Name = "Digitizer" RB1 Point Collection Array 2.Digitizer Points = " " RB1 Point Collection Array 2.Reference Sensor Name = "" RB1 Point Collection Array 2.Reference Sensor Points = " " RB1 Point Collection Array 3.Linkage.Linked? = "FALSE" RB1 Point Collection Array 3.Linkage.Linked RB Name = "" RB1 Point Collection Array 3.Linkage.Linked Index = "0" RB1 Point Collection Array 3.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 3.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 3.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 3.Timing.Number of Data Points = "10" RB1 Point Collection Array 3.Point Collection Type = "0" RB1 Point Collection Array 3.Fitting = "" RB1 Point Collection Array 3.Digitizer Name = "Digitizer" RB1 Point Collection Array 3.Digitizer Points = " " RB1 Point Collection Array 3.Reference Sensor Name = "" RB1 Point Collection Array 3.Reference Sensor Points = " " RB1 Point Collection Array 4.Linkage.Linked? = "FALSE" RB1 Point Collection Array 4.Linkage.Linked RB Name = "" RB1 Point Collection Array 4.Linkage.Linked Index = "0" RB1 Point Collection Array 4.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 4.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 4.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 4.Timing.Number of Data Points = "10" RB1 Point Collection Array 4.Point Collection Type = "0" RB1 Point Collection Array 4.Fitting = "" RB1 Point Collection Array 4.Digitizer Name = "Digitizer" RB1 Point Collection Array 4.Digitizer Points = " " RB1 Point Collection Array 4.Reference Sensor Name = "" RB1 Point Collection Array 4.Reference Sensor Points = " " RB1 Point Collection Array 5.Linkage.Linked? = "FALSE" RB1 Point Collection Array 5.Linkage.Linked RB Name = "" RB1 Point Collection Array 5.Linkage.Linked Index = "0" RB1 Point Collection Array 5.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 5.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 5.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 5.Timing.Number of Data Points = "10" RB1 Point Collection Array 5.Point Collection Type = "0" RB1 Point Collection Array 5.Fitting = "" RB1 Point Collection Array 5.Digitizer Name = "Digitizer" RB1 Point Collection Array 5.Digitizer Points = " " RB1 Point Collection Array 5.Reference Sensor Name = "" RB1 Point Collection Array 5.Reference Sensor Points = " " RB2 Point Collection Array. = "14" RB2 Point Collection Array 0.Linkage.Linked? = "FALSE" RB2 Point Collection Array 0.Linkage.Linked RB Name = "" RB2 Point Collection Array 0.Linkage.Linked Index = "0" RB2 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 0.Timing.Number of Data Points = "10" RB2 Point Collection Array 0.Point Collection Type = "0" RB2 Point Collection Array 0.Fitting = "" RB2 Point Collection Array 0.Digitizer Name = "Digitizer" RB2 Point Collection Array 0.Digitizer Points = " " RB2 Point Collection Array 0.Reference Sensor Name = "" RB2 Point Collection Array 0.Reference Sensor Points = " " RB2 Point Collection Array 1.Linkage.Linked? = "FALSE" RB2 Point Collection Array 1.Linkage.Linked RB Name = "" RB2 Point Collection Array 1.Linkage.Linked Index = "0" RB2 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 1.Timing.Number of Data Points = "10" RB2 Point Collection Array 1.Point Collection Type = "0" RB2 Point Collection Array 1.Fitting = "" RB2 Point Collection Array 1.Digitizer Name = "Digitizer" RB2 Point Collection Array 1.Digitizer Points = " " RB2 Point Collection Array 1.Reference Sensor Name = "" RB2 Point Collection Array 1.Reference Sensor Points = " " RB2 Point Collection Array 2.Linkage.Linked? = "FALSE" RB2 Point Collection Array 2.Linkage.Linked RB Name = "" RB2 Point Collection Array 2.Linkage.Linked Index = "0" RB2 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 2.Timing.Number of Data Points = "10" RB2 Point Collection Array 2.Point Collection Type = "0" RB2 Point Collection Array 2.Fitting = "" RB2 Point Collection Array 2.Digitizer Name = "Digitizer" RB2 Point Collection Array 2.Digitizer Points = " " RB2 Point Collection Array 2.Reference Sensor Name = "" RB2 Point Collection Array 2.Reference Sensor Points = " " RB2 Point Collection Array 3.Linkage.Linked? = "FALSE" RB2 Point Collection Array 3.Linkage.Linked RB Name = "" RB2 Point Collection Array 3.Linkage.Linked Index = "0" RB2 Point Collection Array 3.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 3.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 3.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 3.Timing.Number of Data Points = "10" RB2 Point Collection Array 3.Point Collection Type = "0" RB2 Point Collection Array 3.Fitting = "" RB2 Point Collection Array 3.Digitizer Name = "Digitizer" RB2 Point Collection Array 3.Digitizer Points = " " RB2 Point Collection Array 3.Reference Sensor Name = "" RB2 Point Collection Array 3.Reference Sensor Points = " " RB2 Point Collection Array 4.Linkage.Linked? = "FALSE" RB2 Point Collection Array 4.Linkage.Linked RB Name = "" RB2 Point Collection Array 4.Linkage.Linked Index = "0" RB2 Point Collection Array 4.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 4.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 4.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 4.Timing.Number of Data Points = "10" RB2 Point Collection Array 4.Point Collection Type = "0" RB2 Point Collection Array 4.Fitting = "" RB2 Point Collection Array 4.Digitizer Name = "Digitizer" RB2 Point Collection Array 4.Digitizer Points = " " RB2 Point Collection Array 4.Reference Sensor Name = "" RB2 Point Collection Array 4.Reference Sensor Points = " " RB2 Point Collection Array 5.Linkage.Linked? = "FALSE" RB2 Point Collection Array 5.Linkage.Linked RB Name = "" RB2 Point Collection Array 5.Linkage.Linked Index = "0" RB2 Point Collection Array 5.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 5.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 5.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 5.Timing.Number of Data Points = "10" RB2 Point Collection Array 5.Point Collection Type = "0" RB2 Point Collection Array 5.Fitting = "" RB2 Point Collection Array 5.Digitizer Name = "Digitizer" RB2 Point Collection Array 5.Digitizer Points = " " RB2 Point Collection Array 5.Reference Sensor Name = "" RB2 Point Collection Array 5.Reference Sensor Points = " " RB2 Point Collection Array 6.Linkage.Linked? = "FALSE" RB2 Point Collection Array 6.Linkage.Linked RB Name = "" RB2 Point Collection Array 6.Linkage.Linked Index = "0" RB2 Point Collection Array 6.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 6.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 6.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 6.Timing.Number of Data Points = "10" RB2 Point Collection Array 6.Point Collection Type = "0" RB2 Point Collection Array 6.Fitting = "" RB2 Point Collection Array 6.Digitizer Name = "Digitizer" RB2 Point Collection Array 6.Digitizer Points = " " RB2 Point Collection Array 6.Reference Sensor Name = "" RB2 Point Collection Array 6.Reference Sensor Points = " " RB2 Point Collection Array 7.Linkage.Linked? = "FALSE" RB2 Point Collection Array 7.Linkage.Linked RB Name = "" RB2 Point Collection Array 7.Linkage.Linked Index = "0" RB2 Point Collection Array 7.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 7.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 7.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 7.Timing.Number of Data Points = "10" RB2 Point Collection Array 7.Point Collection Type = "0" RB2 Point Collection Array 7.Fitting = "" RB2 Point Collection Array 7.Digitizer Name = "Digitizer" RB2 Point Collection Array 7.Digitizer Points = " " RB2 Point Collection Array 7.Reference Sensor Name = "" RB2 Point Collection Array 7.Reference Sensor Points = " " RB2 Point Collection Array 8.Linkage.Linked? = "FALSE" RB2 Point Collection Array 8.Linkage.Linked RB Name = "" RB2 Point Collection Array 8.Linkage.Linked Index = "0" RB2 Point Collection Array 8.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 8.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 8.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 8.Timing.Number of Data Points = "10" RB2 Point Collection Array 8.Point Collection Type = "0" RB2 Point Collection Array 8.Fitting = "" RB2 Point Collection Array 8.Digitizer Name = "Digitizer" RB2 Point Collection Array 8.Digitizer Points = " " RB2 Point Collection Array 8.Reference Sensor Name = "" RB2 Point Collection Array 8.Reference Sensor Points = " " RB2 Point Collection Array 9.Linkage.Linked? = "FALSE" RB2 Point Collection Array 9.Linkage.Linked RB Name = "" RB2 Point Collection Array 9.Linkage.Linked Index = "0" RB2 Point Collection Array 9.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 9.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 9.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 9.Timing.Number of Data Points = "10" RB2 Point Collection Array 9.Point Collection Type = "0" RB2 Point Collection Array 9.Fitting = "" RB2 Point Collection Array 9.Digitizer Name = "Digitizer" RB2 Point Collection Array 9.Digitizer Points = " " RB2 Point Collection Array 9.Reference Sensor Name = "" RB2 Point Collection Array 9.Reference Sensor Points = " " RB2 Point Collection Array 10.Linkage.Linked? = "FALSE" RB2 Point Collection Array 10.Linkage.Linked RB Name = "" RB2 Point Collection Array 10.Linkage.Linked Index = "0" RB2 Point Collection Array 10.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 10.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 10.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 10.Timing.Number of Data Points = "10" RB2 Point Collection Array 10.Point Collection Type = "0" RB2 Point Collection Array 10.Fitting = "" RB2 Point Collection Array 10.Digitizer Name = "Digitizer" RB2 Point Collection Array 10.Digitizer Points = " " RB2 Point Collection Array 10.Reference Sensor Name = "" RB2 Point Collection Array 10.Reference Sensor Points = " " RB2 Point Collection Array 11.Linkage.Linked? = "FALSE" RB2 Point Collection Array 11.Linkage.Linked RB Name = "" RB2 Point Collection Array 11.Linkage.Linked Index = "0" RB2 Point Collection Array 11.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 11.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 11.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 11.Timing.Number of Data Points = "10" RB2 Point Collection Array 11.Point Collection Type = "0" RB2 Point Collection Array 11.Fitting = "" RB2 Point Collection Array 11.Digitizer Name = "Digitizer" RB2 Point Collection Array 11.Digitizer Points = " " RB2 Point Collection Array 11.Reference Sensor Name = "" RB2 Point Collection Array 11.Reference Sensor Points = " " RB2 Point Collection Array 12.Linkage.Linked? = "FALSE" RB2 Point Collection Array 12.Linkage.Linked RB Name = "" RB2 Point Collection Array 12.Linkage.Linked Index = "0" RB2 Point Collection Array 12.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 12.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 12.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 12.Timing.Number of Data Points = "10" RB2 Point Collection Array 12.Point Collection Type = "0" RB2 Point Collection Array 12.Fitting = "" RB2 Point Collection Array 12.Digitizer Name = "Digitizer" RB2 Point Collection Array 12.Digitizer Points = " " RB2 Point Collection Array 12.Reference Sensor Name = "" RB2 Point Collection Array 12.Reference Sensor Points = " " RB2 Point Collection Array 13.Linkage.Linked? = "FALSE" RB2 Point Collection Array 13.Linkage.Linked RB Name = "" RB2 Point Collection Array 13.Linkage.Linked Index = "0" RB2 Point Collection Array 13.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 13.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 13.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 13.Timing.Number of Data Points = "10" RB2 Point Collection Array 13.Point Collection Type = "0" RB2 Point Collection Array 13.Fitting = "" RB2 Point Collection Array 13.Digitizer Name = "Digitizer" RB2 Point Collection Array 13.Digitizer Points = " " RB2 Point Collection Array 13.Reference Sensor Name = "" RB2 Point Collection Array 13.Reference Sensor Points = " " RB1 Fid Pt Collection Array. = "3" RB1 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 0.Point Collection Type = "0" RB1 Fid Pt Collection Array 0.Fitting = "" RB1 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 0.Digitizer Points = " " RB1 Fid Pt Collection Array 0.Reference Sensor Name = "" RB1 Fid Pt Collection Array 0.Reference Sensor Points = " " RB1 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 1.Point Collection Type = "0" RB1 Fid Pt Collection Array 1.Fitting = "" RB1 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 1.Digitizer Points = " " RB1 Fid Pt Collection Array 1.Reference Sensor Name = "" RB1 Fid Pt Collection Array 1.Reference Sensor Points = " " RB1 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 2.Point Collection Type = "0" RB1 Fid Pt Collection Array 2.Fitting = "" RB1 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 2.Digitizer Points = " " RB1 Fid Pt Collection Array 2.Reference Sensor Name = "" RB1 Fid Pt Collection Array 2.Reference Sensor Points = " " RB2 Fid Pt Collection Array. = "3" RB2 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 0.Point Collection Type = "0" RB2 Fid Pt Collection Array 0.Fitting = "" RB2 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 0.Digitizer Points = " " RB2 Fid Pt Collection Array 0.Reference Sensor Name = "" RB2 Fid Pt Collection Array 0.Reference Sensor Points = " " RB2 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 1.Point Collection Type = "0" RB2 Fid Pt Collection Array 1.Fitting = "" RB2 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 1.Digitizer Points = " " RB2 Fid Pt Collection Array 1.Reference Sensor Name = "" RB2 Fid Pt Collection Array 1.Reference Sensor Points = " " RB2 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 2.Point Collection Type = "0" RB2 Fid Pt Collection Array 2.Fitting = "" RB2 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 2.Digitizer Points = " " RB2 Fid Pt Collection Array 2.Reference Sensor Name = "" RB2 Fid Pt Collection Array 2.Reference Sensor Points = " " Rigid Body 1 CS Definition Name = "simVITRO CS" Rigid Body 2 CS Definition Name = "Probe" [Probe LC2REF] Version = "2.3.1.0.0" Class = "Surgical Tool Load Cell 2 REF.lvclass" Name = "Probe LC2REF" Description = "This is the default 6-DOF position state using a single sensor" Notes = "This state is the relative position of two rigid bodies given the position in space of a position sensors. It stores the relative (static) relationship between the rigid bodies and the sensor and then given the sensor position it can calculate the relative positions. The position sensor in the included sensor array is the relative rigid body (rigid body 2) and the x, y, z, roll, pitch, yaw relationship is the position of the rigid body 2 relative to he fixed rigid body 1. Input and output units are expected to be mm and deg.\0A\0AThis state assumes that Rigid Body 1 is static and Rigid Body 2 is dynamic. This is a requirement to be able to measure relative position with a single sensor. This state does NOT assume that the digitizer for the point collection is in the same reference frame as the position sensor. However, it does assume that the digitizer is in the WORLD1 reference frame. In other words, the static Rigid Body (rigid body 1) and the digitizer are in the same World frame. Digitization of Rigid Body 2 will be done in the World1 reference frame (since that is what the digitizer operates in) but the T_World1_World2 matrix will need to be utilized to calculate the T_Sensor2_RB2 matrix." Channel Names. = "6" Channel Names 0 = "x" Channel Names 1 = "y" Channel Names 2 = "z" Channel Names 3 = "roll" Channel Names 4 = "pitch" Channel Names 5 = "yaw" Channel Units. = "6" Channel Units 0 = "mm" Channel Units 1 = "mm" Channel Units 2 = "mm" Channel Units 3 = "deg" Channel Units 4 = "deg" Channel Units 5 = "deg" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "1" Included Sensors 0 = "Scalpel Pos" Included States. = "0" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Surgical Tool Load Cell 2 REF" Data Description Parameters.Data Name = "Probe LC2REF" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Probe LC2REF" Enable State = "TRUE" Collected Points Rigid Body 1 (m) = " " Collected Points Rigid Body 1 Position Sensor (m,rad) = " " Collected Points Rigid Body 2 (m) = " 0.9141655273 0.7797347412 0.1935661774 0.9053552856 0.7849461060 0.1917201385 0.9188196411 0.7801995850 0.1662898407 0.8864183960 0.7756284180 0.1396354828 0.9018815308 0.7743956909 0.1362358856 0.8961139526 0.7508612061 0.1874282837" Collected Points Rigid Body 2 Position Sensor (m,rad) = " 0.9473701172 0.7632108765 0.1833282776 2.2011644263 -0.5194019666 0.1504516406 0.9259296265 0.7785259399 0.1794583893 1.4947617461 0.0975075071 0.4076950089 0.9511121216 0.7670888672 0.1515210876 1.1204671049 0.4737537211 0.1699491756 0.9175941772 0.7697339478 0.1291875916 -0.6626318300 0.3665455082 -0.7732482233 0.9346488647 0.7739446411 0.1278905106 -0.5499367064 0.5698875780 -0.8568868613 0.9353610229 0.7469327393 0.1922150421 -0.4205935303 0.6148985291 -0.8638090162" Position Offset (m,rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T_Sensor1_RB1 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_Sensor2_RB2 = " -0.0627376035 -0.5052214165 -0.8607062875 -0.0287458005 -0.9977126143 0.0534984854 0.0413213175 -0.0035859978 0.0251700682 0.8613299207 -0.5074221471 -0.0225580616 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Collected Point Names - Rigid Body 1. = "0" Collected Point Names - Rigid Body 2. = "6" Collected Point Names - Rigid Body 2 0 = "ScalpelDivots-Handle01" Collected Point Names - Rigid Body 2 1 = "ScalpelDivots-Handle02" Collected Point Names - Rigid Body 2 2 = "ScalpelDivots-Handle03" Collected Point Names - Rigid Body 2 3 = "ScalpelDivots-Handle04" Collected Point Names - Rigid Body 2 4 = "ScalpelDivots-Handle05" Collected Point Names - Rigid Body 2 5 = "ScalpelDivots-Handle06" Collected Point Images - Rigid Body 1. = "3" Collected Point Images - Rigid Body 1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Point Images - Rigid Body 1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Point Images - Rigid Body 1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Point Images - Rigid Body 2. = "6" Collected Point Images - Rigid Body 2 0 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ScalpelDivots-Handle01.png" Collected Point Images - Rigid Body 2 1 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ScalpelDivots-Handle02.png" Collected Point Images - Rigid Body 2 2 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ScalpelDivots-Handle03.png" Collected Point Images - Rigid Body 2 3 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ScalpelDivots-Handle04.png" Collected Point Images - Rigid Body 2 4 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ScalpelDivots-Handle05.png" Collected Point Images - Rigid Body 2 5 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ScalpelDivots-Handle06.png" T_World1_World2 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Rigid Body 1 Name = "World" Rigid Body 2 Name = "Scalpel LC" Initial Collected Points Rigid Body 1 (m) = " " Initial Collected Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Fiducials Enabled RB1 = "FALSE" Fiducials Enabled RB2 = "FALSE" Fiducial Type RB1 = "Manual Digitization" Fiducial Type RB2 = "Manual Digitization" Rigid Body 1 Fiducial Sensor Name = "" Rigid Body 2 Fiducial Sensor Name = "" Rigid Body 1 Number of Fiducials = "0.0000000000" Rigid Body 2 Number of Fiducials = "0.0000000000" Initial Manual Fiducial Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Manual Fiducial Points Rigid Body 1 (m) = " " Final Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 2 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 2 (m, rady) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T RB1-OPT_RB1-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T RB2-OPT_RB2-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_World1_World2 for Fiducials = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen1_RB1 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen2_RB2 = " -0.0627376035 -0.5052214165 -0.8607062875 -0.0287458005 -0.9977126143 0.0534984854 0.0413213175 -0.0035859978 0.0251700682 0.8613299207 -0.5074221471 -0.0225580616 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Digitization Phase = "Final" Collected 6-DOF Fiducial Point Images - RB1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Images - RB2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Names - RB1. = "0" Collected Manual Fiducial Point Names - RB2. = "0" Collected Manual Fiducial Point Images - RB1. = "3" Collected Manual Fiducial Point Images - RB1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2. = "3" Collected Manual Fiducial Point Images - RB2 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Names - RB1 = "" Collected 6-DOF Fiducial Point Names - RB2 = "" RB1 Point Collection Array. = "0" RB2 Point Collection Array. = "6" RB2 Point Collection Array 0.Linkage.Linked? = "FALSE" RB2 Point Collection Array 0.Linkage.Linked RB Name = "" RB2 Point Collection Array 0.Linkage.Linked Index = "0" RB2 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 0.Timing.Number of Data Points = "10" RB2 Point Collection Array 0.Point Collection Type = "0" RB2 Point Collection Array 0.Fitting = "" RB2 Point Collection Array 0.Digitizer Name = "Digitizer" RB2 Point Collection Array 0.Digitizer Points = " " RB2 Point Collection Array 0.Reference Sensor Name = "" RB2 Point Collection Array 0.Reference Sensor Points = " " RB2 Point Collection Array 1.Linkage.Linked? = "FALSE" RB2 Point Collection Array 1.Linkage.Linked RB Name = "" RB2 Point Collection Array 1.Linkage.Linked Index = "0" RB2 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 1.Timing.Number of Data Points = "10" RB2 Point Collection Array 1.Point Collection Type = "0" RB2 Point Collection Array 1.Fitting = "" RB2 Point Collection Array 1.Digitizer Name = "Digitizer" RB2 Point Collection Array 1.Digitizer Points = " " RB2 Point Collection Array 1.Reference Sensor Name = "" RB2 Point Collection Array 1.Reference Sensor Points = " " RB2 Point Collection Array 2.Linkage.Linked? = "FALSE" RB2 Point Collection Array 2.Linkage.Linked RB Name = "" RB2 Point Collection Array 2.Linkage.Linked Index = "0" RB2 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 2.Timing.Number of Data Points = "10" RB2 Point Collection Array 2.Point Collection Type = "0" RB2 Point Collection Array 2.Fitting = "" RB2 Point Collection Array 2.Digitizer Name = "Digitizer" RB2 Point Collection Array 2.Digitizer Points = " " RB2 Point Collection Array 2.Reference Sensor Name = "" RB2 Point Collection Array 2.Reference Sensor Points = " " RB2 Point Collection Array 3.Linkage.Linked? = "FALSE" RB2 Point Collection Array 3.Linkage.Linked RB Name = "" RB2 Point Collection Array 3.Linkage.Linked Index = "0" RB2 Point Collection Array 3.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 3.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 3.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 3.Timing.Number of Data Points = "10" RB2 Point Collection Array 3.Point Collection Type = "0" RB2 Point Collection Array 3.Fitting = "" RB2 Point Collection Array 3.Digitizer Name = "Digitizer" RB2 Point Collection Array 3.Digitizer Points = " " RB2 Point Collection Array 3.Reference Sensor Name = "" RB2 Point Collection Array 3.Reference Sensor Points = " " RB2 Point Collection Array 4.Linkage.Linked? = "FALSE" RB2 Point Collection Array 4.Linkage.Linked RB Name = "" RB2 Point Collection Array 4.Linkage.Linked Index = "0" RB2 Point Collection Array 4.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 4.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 4.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 4.Timing.Number of Data Points = "10" RB2 Point Collection Array 4.Point Collection Type = "0" RB2 Point Collection Array 4.Fitting = "" RB2 Point Collection Array 4.Digitizer Name = "Digitizer" RB2 Point Collection Array 4.Digitizer Points = " " RB2 Point Collection Array 4.Reference Sensor Name = "" RB2 Point Collection Array 4.Reference Sensor Points = " " RB2 Point Collection Array 5.Linkage.Linked? = "FALSE" RB2 Point Collection Array 5.Linkage.Linked RB Name = "" RB2 Point Collection Array 5.Linkage.Linked Index = "0" RB2 Point Collection Array 5.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 5.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 5.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 5.Timing.Number of Data Points = "10" RB2 Point Collection Array 5.Point Collection Type = "0" RB2 Point Collection Array 5.Fitting = "" RB2 Point Collection Array 5.Digitizer Name = "Digitizer" RB2 Point Collection Array 5.Digitizer Points = " " RB2 Point Collection Array 5.Reference Sensor Name = "" RB2 Point Collection Array 5.Reference Sensor Points = " " RB1 Fid Pt Collection Array. = "3" RB1 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 0.Point Collection Type = "0" RB1 Fid Pt Collection Array 0.Fitting = "" RB1 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 0.Digitizer Points = " " RB1 Fid Pt Collection Array 0.Reference Sensor Name = "" RB1 Fid Pt Collection Array 0.Reference Sensor Points = " " RB1 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 1.Point Collection Type = "0" RB1 Fid Pt Collection Array 1.Fitting = "" RB1 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 1.Digitizer Points = " " RB1 Fid Pt Collection Array 1.Reference Sensor Name = "" RB1 Fid Pt Collection Array 1.Reference Sensor Points = " " RB1 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 2.Point Collection Type = "0" RB1 Fid Pt Collection Array 2.Fitting = "" RB1 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 2.Digitizer Points = " " RB1 Fid Pt Collection Array 2.Reference Sensor Name = "" RB1 Fid Pt Collection Array 2.Reference Sensor Points = " " RB2 Fid Pt Collection Array. = "3" RB2 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 0.Point Collection Type = "0" RB2 Fid Pt Collection Array 0.Fitting = "" RB2 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 0.Digitizer Points = " " RB2 Fid Pt Collection Array 0.Reference Sensor Name = "" RB2 Fid Pt Collection Array 0.Reference Sensor Points = " " RB2 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 1.Point Collection Type = "0" RB2 Fid Pt Collection Array 1.Fitting = "" RB2 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 1.Digitizer Points = " " RB2 Fid Pt Collection Array 1.Reference Sensor Name = "" RB2 Fid Pt Collection Array 1.Reference Sensor Points = " " RB2 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 2.Point Collection Type = "0" RB2 Fid Pt Collection Array 2.Fitting = "" RB2 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 2.Digitizer Points = " " RB2 Fid Pt Collection Array 2.Reference Sensor Name = "" RB2 Fid Pt Collection Array 2.Reference Sensor Points = " " Rigid Body 1 CS Definition Name = "" Rigid Body 2 CS Definition Name = "" Gravity Compensation = "FALSE" 6-DOF Load Sensor - Rigid Body = "Rigid Body 2" Dynamic Load Transformation = "FALSE" Divot Points in LC Frame = " -0.0073020000 -0.0126390000 -0.0055900000 -0.0145910000 -0.0000004999 -0.0055900000 -0.0072900000 0.0126330000 -0.0055900000 0.0073010000 0.0126260000 -0.0055900000 0.0145910000 -0.0000134999 -0.0055900000 0.0072890000 -0.0126460000 -0.0055900000" [Probe Load] Version = "2.0" Class = "Surgical Tool 6 DOF Load.lvclass" Name = "Probe Load" Description = "This is the default 6-DOF load state" Notes = "This state is the 6-DOF loads acting on a rigid body given a 6-DOF Position state describing the position of said rigid body with respect to the position of a 6-DOF load cell and the load cell sensor output. It can transform the loads to the rigid body coordinate system with or without gravity compensation. Input and output units are expected to be mm and deg and N and Nm.\0AWhen performing the static loads transform the state needs to be appropriately formulated." Channel Names. = "6" Channel Names 0 = "Fx" Channel Names 1 = "Fy" Channel Names 2 = "Fz" Channel Names 3 = "Mx" Channel Names 4 = "My" Channel Names 5 = "Mz" Channel Units. = "6" Channel Units 0 = "N" Channel Units 1 = "N" Channel Units 2 = "N" Channel Units 3 = "Nm" Channel Units 4 = "Nm" Channel Units 5 = "Nm" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "1" Included Sensors 0 = "Scalpel LC" Included States. = "2" Included States 0 = "Probe LC2REF" Included States 1 = "Probe" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Surgical Tool 6 DOF Load" Data Description Parameters.Data Name = "Probe Load" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Probe Load" Enable State = "TRUE" Gravity Vector = " 0.0000000000 0.0000000000 -1.0000000000" Gravity Compensation = "FALSE" Inertial Compensation = "FALSE" 6-DOF Load Sensor - Rigid Body = "Rigid Body 2" Load Cell Offsets (N, Nm) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Center of Mass in Load Cell CS (mm) = " 0.0000000000 0.0000000000 0.0000000000" Load Cell Mass (N) = "0.0000000000" Load Cell Data Array = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Dynamic Load Transformation = "FALSE" Static Transformation Matrix- T_REF_LOAD = " -0.1790149584 0.1792686930 -0.9673760284 0.0048343911 -0.9770911872 0.0826298452 0.1961252678 0.0014485513 0.1150932519 0.9803239487 0.1603698818 0.0742556182 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Gravity Compensation Library Configuration File Path = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Classes/State/6-DOF/6-DOF Load/Gravity_Compensation_Library.ini" Gravity Compensation Type = "" [Retractor] Version = "2.3" Class = "Surgical Tool Position.lvclass" Name = "Retractor" Description = "This is the position state for the Ultrasound Probe" Notes = "This is the position state that defines the relative relationship between a bone and the Ultrasound Probe. Rigid Body 1 is the bone and rigid body 2 is the coordinate system as defined by the ultrasound probe." Channel Names. = "6" Channel Names 0 = "x" Channel Names 1 = "y" Channel Names 2 = "z" Channel Names 3 = "roll" Channel Names 4 = "pitch" Channel Names 5 = "yaw" Channel Units. = "6" Channel Units 0 = "mm" Channel Units 1 = "mm" Channel Units 2 = "mm" Channel Units 3 = "deg" Channel Units 4 = "deg" Channel Units 5 = "deg" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "2" Included Sensors 0 = "Femur" Included Sensors 1 = "Retractor Pos" Included States. = "0" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Surgical Tool Position" Data Description Parameters.Data Name = "Retractor" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Retractor" Enable State = "TRUE" Collected Points Rigid Body 1 (m) = " 0.8098500366 0.4765617371 0.1202015686 0.8130097656 0.3951024780 0.1287006378 1.2546713867 0.4252901306 0.1662164154 1.2920426025 0.4256895142 0.1372024841 1.2398444824 0.4360792542 0.1011189346 1.2336650391 0.4284200134 0.1582896118" Collected Points Rigid Body 1 Position Sensor (m,rad) = " 1.2743641357 0.5254555054 0.1577446442 1.1889727960 -0.7727368298 2.9731703515 1.2744483643 0.5255729980 0.1578283997 1.1884582733 -0.7723162501 2.9720456986 1.2742990723 0.5254907837 0.1577628174 1.1898267386 -0.7734403704 2.9727900521 1.2742718506 0.5255087280 0.1577700195 1.1887747900 -0.7734998254 2.9719255900 1.2740421143 0.5255019531 0.1577745819 1.1896517690 -0.7737301889 2.9723967032 1.2741342773 0.5254696655 0.1577571411 1.1897488412 -0.7735054181 2.9727855247" Collected Points Rigid Body 2 (m) = " 0.8770969238 0.7745577393 0.1126845779 0.8745547485 0.7664132690 0.0930052872 0.8967736816 0.7112977295 0.1206442871" Collected Points Rigid Body 2 Position Sensor (m,rad) = " 0.9033670044 0.6714653320 0.1357902069 0.5225657354 -0.4458323745 1.3522524009 0.8755247803 0.7126434937 0.1347488861 0.0477765232 -0.0483262205 1.4377220287 0.9414735718 0.7091948242 0.1128673401 0.2324484065 1.2166667419 0.1496468167" Position Offset (m,rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T_Sensor1_RB1 = " -0.0345200751 -0.7307291107 -0.6817942000 0.2927516112 0.5310051288 -0.5913505905 0.6069085865 -0.2459303416 -0.8466651744 -0.3410856870 0.4084343723 -0.2780039980 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_Sensor2_RB2 = " 0.0763651350 -0.0794153268 -0.9939122557 0.0510870782 -0.0788425324 0.9932208505 -0.0854177807 0.0059725571 0.9939578569 0.0848854996 0.0695861389 -0.0445992909 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Collected Point Names - Rigid Body 1. = "6" Collected Point Names - Rigid Body 1 0 = "Lateral Femoral Epicondyle" Collected Point Names - Rigid Body 1 1 = "Medial Femoral Epicondyle" Collected Point Names - Rigid Body 1 2 = "Femoral Head Point 1" Collected Point Names - Rigid Body 1 3 = "Femoral Head Point 2" Collected Point Names - Rigid Body 1 4 = "Femoral Head Point 3" Collected Point Names - Rigid Body 1 5 = "Femoral Head Point 4" Collected Point Names - Rigid Body 2. = "3" Collected Point Names - Rigid Body 2 0 = "Tip" Collected Point Names - Rigid Body 2 1 = "Origin" Collected Point Names - Rigid Body 2 2 = "Cylinder End" Collected Point Images - Rigid Body 1. = "6" Collected Point Images - Rigid Body 1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/RKnee_LFE.jpg" Collected Point Images - Rigid Body 1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/RKnee_MFE.jpg" Collected Point Images - Rigid Body 1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt1.JPG" Collected Point Images - Rigid Body 1 3 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt2.JPG" Collected Point Images - Rigid Body 1 4 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt3.JPG" Collected Point Images - Rigid Body 1 5 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt4.JPG" Collected Point Images - Rigid Body 2. = "3" Collected Point Images - Rigid Body 2 0 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationScalpel/retractorCloseToTip.jpg" Collected Point Images - Rigid Body 2 1 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationScalpel/retractorCylDistal.jpg" Collected Point Images - Rigid Body 2 2 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationScalpel/scalpelCyl.jpg" T_World1_World2 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Rigid Body 1 Name = "Femur" Rigid Body 2 Name = "Retractor" Initial Collected Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Collected Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Fiducials Enabled RB1 = "FALSE" Fiducials Enabled RB2 = "FALSE" Fiducial Type RB1 = "Manual Digitization" Fiducial Type RB2 = "Manual Digitization" Rigid Body 1 Fiducial Sensor Name = "" Rigid Body 2 Fiducial Sensor Name = "" Rigid Body 1 Number of Fiducials = "0.0000000000" Rigid Body 2 Number of Fiducials = "0.0000000000" Initial Manual Fiducial Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Manual Fiducial Points Rigid Body 1 (m) = " " Final Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 2 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 2 (m, rady) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T RB1-OPT_RB1-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T RB2-OPT_RB2-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_World1_World2 for Fiducials = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen1_RB1 = " -0.0345200751 -0.7307291107 -0.6817942000 0.2927516112 0.5310051288 -0.5913505905 0.6069085865 -0.2459303416 -0.8466651744 -0.3410856870 0.4084343723 -0.2780039980 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen2_RB2 = " 0.0763651350 -0.0794153268 -0.9939122557 0.0510870782 -0.0788425324 0.9932208505 -0.0854177807 0.0059725571 0.9939578569 0.0848854996 0.0695861389 -0.0445992909 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Digitization Phase = "Final" Collected 6-DOF Fiducial Point Images - RB1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Images - RB2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Names - RB1. = "0" Collected Manual Fiducial Point Names - RB2. = "0" Collected Manual Fiducial Point Images - RB1. = "3" Collected Manual Fiducial Point Images - RB1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2. = "3" Collected Manual Fiducial Point Images - RB2 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Names - RB1 = "" Collected 6-DOF Fiducial Point Names - RB2 = "" RB1 Point Collection Array. = "6" RB1 Point Collection Array 0.Linkage.Linked? = "FALSE" RB1 Point Collection Array 0.Linkage.Linked RB Name = "" RB1 Point Collection Array 0.Linkage.Linked Index = "0" RB1 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 0.Timing.Number of Data Points = "10" RB1 Point Collection Array 0.Point Collection Type = "0" RB1 Point Collection Array 0.Fitting = "" RB1 Point Collection Array 0.Digitizer Name = "Digitizer" RB1 Point Collection Array 0.Digitizer Points = " " RB1 Point Collection Array 0.Reference Sensor Name = "" RB1 Point Collection Array 0.Reference Sensor Points = " " RB1 Point Collection Array 1.Linkage.Linked? = "FALSE" RB1 Point Collection Array 1.Linkage.Linked RB Name = "" RB1 Point Collection Array 1.Linkage.Linked Index = "0" RB1 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 1.Timing.Number of Data Points = "10" RB1 Point Collection Array 1.Point Collection Type = "0" RB1 Point Collection Array 1.Fitting = "" RB1 Point Collection Array 1.Digitizer Name = "Digitizer" RB1 Point Collection Array 1.Digitizer Points = " " RB1 Point Collection Array 1.Reference Sensor Name = "" RB1 Point Collection Array 1.Reference Sensor Points = " " RB1 Point Collection Array 2.Linkage.Linked? = "FALSE" RB1 Point Collection Array 2.Linkage.Linked RB Name = "" RB1 Point Collection Array 2.Linkage.Linked Index = "0" RB1 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 2.Timing.Number of Data Points = "10" RB1 Point Collection Array 2.Point Collection Type = "0" RB1 Point Collection Array 2.Fitting = "" RB1 Point Collection Array 2.Digitizer Name = "Digitizer" RB1 Point Collection Array 2.Digitizer Points = " " RB1 Point Collection Array 2.Reference Sensor Name = "" RB1 Point Collection Array 2.Reference Sensor Points = " " RB1 Point Collection Array 3.Linkage.Linked? = "FALSE" RB1 Point Collection Array 3.Linkage.Linked RB Name = "" RB1 Point Collection Array 3.Linkage.Linked Index = "0" RB1 Point Collection Array 3.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 3.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 3.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 3.Timing.Number of Data Points = "10" RB1 Point Collection Array 3.Point Collection Type = "0" RB1 Point Collection Array 3.Fitting = "" RB1 Point Collection Array 3.Digitizer Name = "Digitizer" RB1 Point Collection Array 3.Digitizer Points = " " RB1 Point Collection Array 3.Reference Sensor Name = "" RB1 Point Collection Array 3.Reference Sensor Points = " " RB1 Point Collection Array 4.Linkage.Linked? = "FALSE" RB1 Point Collection Array 4.Linkage.Linked RB Name = "" RB1 Point Collection Array 4.Linkage.Linked Index = "0" RB1 Point Collection Array 4.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 4.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 4.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 4.Timing.Number of Data Points = "10" RB1 Point Collection Array 4.Point Collection Type = "0" RB1 Point Collection Array 4.Fitting = "" RB1 Point Collection Array 4.Digitizer Name = "Digitizer" RB1 Point Collection Array 4.Digitizer Points = " " RB1 Point Collection Array 4.Reference Sensor Name = "" RB1 Point Collection Array 4.Reference Sensor Points = " " RB1 Point Collection Array 5.Linkage.Linked? = "FALSE" RB1 Point Collection Array 5.Linkage.Linked RB Name = "" RB1 Point Collection Array 5.Linkage.Linked Index = "0" RB1 Point Collection Array 5.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 5.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 5.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 5.Timing.Number of Data Points = "10" RB1 Point Collection Array 5.Point Collection Type = "0" RB1 Point Collection Array 5.Fitting = "" RB1 Point Collection Array 5.Digitizer Name = "Digitizer" RB1 Point Collection Array 5.Digitizer Points = " " RB1 Point Collection Array 5.Reference Sensor Name = "" RB1 Point Collection Array 5.Reference Sensor Points = " " RB2 Point Collection Array. = "14" RB2 Point Collection Array 0.Linkage.Linked? = "FALSE" RB2 Point Collection Array 0.Linkage.Linked RB Name = "" RB2 Point Collection Array 0.Linkage.Linked Index = "0" RB2 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 0.Timing.Number of Data Points = "10" RB2 Point Collection Array 0.Point Collection Type = "0" RB2 Point Collection Array 0.Fitting = "" RB2 Point Collection Array 0.Digitizer Name = "Digitizer" RB2 Point Collection Array 0.Digitizer Points = " " RB2 Point Collection Array 0.Reference Sensor Name = "" RB2 Point Collection Array 0.Reference Sensor Points = " " RB2 Point Collection Array 1.Linkage.Linked? = "FALSE" RB2 Point Collection Array 1.Linkage.Linked RB Name = "" RB2 Point Collection Array 1.Linkage.Linked Index = "0" RB2 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 1.Timing.Number of Data Points = "10" RB2 Point Collection Array 1.Point Collection Type = "0" RB2 Point Collection Array 1.Fitting = "" RB2 Point Collection Array 1.Digitizer Name = "Digitizer" RB2 Point Collection Array 1.Digitizer Points = " " RB2 Point Collection Array 1.Reference Sensor Name = "" RB2 Point Collection Array 1.Reference Sensor Points = " " RB2 Point Collection Array 2.Linkage.Linked? = "FALSE" RB2 Point Collection Array 2.Linkage.Linked RB Name = "" RB2 Point Collection Array 2.Linkage.Linked Index = "0" RB2 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 2.Timing.Number of Data Points = "10" RB2 Point Collection Array 2.Point Collection Type = "0" RB2 Point Collection Array 2.Fitting = "" RB2 Point Collection Array 2.Digitizer Name = "Digitizer" RB2 Point Collection Array 2.Digitizer Points = " " RB2 Point Collection Array 2.Reference Sensor Name = "" RB2 Point Collection Array 2.Reference Sensor Points = " " RB2 Point Collection Array 3.Linkage.Linked? = "FALSE" RB2 Point Collection Array 3.Linkage.Linked RB Name = "" RB2 Point Collection Array 3.Linkage.Linked Index = "0" RB2 Point Collection Array 3.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 3.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 3.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 3.Timing.Number of Data Points = "10" RB2 Point Collection Array 3.Point Collection Type = "0" RB2 Point Collection Array 3.Fitting = "" RB2 Point Collection Array 3.Digitizer Name = "Digitizer" RB2 Point Collection Array 3.Digitizer Points = " " RB2 Point Collection Array 3.Reference Sensor Name = "" RB2 Point Collection Array 3.Reference Sensor Points = " " RB2 Point Collection Array 4.Linkage.Linked? = "FALSE" RB2 Point Collection Array 4.Linkage.Linked RB Name = "" RB2 Point Collection Array 4.Linkage.Linked Index = "0" RB2 Point Collection Array 4.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 4.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 4.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 4.Timing.Number of Data Points = "10" RB2 Point Collection Array 4.Point Collection Type = "0" RB2 Point Collection Array 4.Fitting = "" RB2 Point Collection Array 4.Digitizer Name = "Digitizer" RB2 Point Collection Array 4.Digitizer Points = " " RB2 Point Collection Array 4.Reference Sensor Name = "" RB2 Point Collection Array 4.Reference Sensor Points = " " RB2 Point Collection Array 5.Linkage.Linked? = "FALSE" RB2 Point Collection Array 5.Linkage.Linked RB Name = "" RB2 Point Collection Array 5.Linkage.Linked Index = "0" RB2 Point Collection Array 5.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 5.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 5.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 5.Timing.Number of Data Points = "10" RB2 Point Collection Array 5.Point Collection Type = "0" RB2 Point Collection Array 5.Fitting = "" RB2 Point Collection Array 5.Digitizer Name = "Digitizer" RB2 Point Collection Array 5.Digitizer Points = " " RB2 Point Collection Array 5.Reference Sensor Name = "" RB2 Point Collection Array 5.Reference Sensor Points = " " RB2 Point Collection Array 6.Linkage.Linked? = "FALSE" RB2 Point Collection Array 6.Linkage.Linked RB Name = "" RB2 Point Collection Array 6.Linkage.Linked Index = "0" RB2 Point Collection Array 6.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 6.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 6.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 6.Timing.Number of Data Points = "10" RB2 Point Collection Array 6.Point Collection Type = "0" RB2 Point Collection Array 6.Fitting = "" RB2 Point Collection Array 6.Digitizer Name = "Digitizer" RB2 Point Collection Array 6.Digitizer Points = " " RB2 Point Collection Array 6.Reference Sensor Name = "" RB2 Point Collection Array 6.Reference Sensor Points = " " RB2 Point Collection Array 7.Linkage.Linked? = "FALSE" RB2 Point Collection Array 7.Linkage.Linked RB Name = "" RB2 Point Collection Array 7.Linkage.Linked Index = "0" RB2 Point Collection Array 7.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 7.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 7.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 7.Timing.Number of Data Points = "10" RB2 Point Collection Array 7.Point Collection Type = "0" RB2 Point Collection Array 7.Fitting = "" RB2 Point Collection Array 7.Digitizer Name = "Digitizer" RB2 Point Collection Array 7.Digitizer Points = " " RB2 Point Collection Array 7.Reference Sensor Name = "" RB2 Point Collection Array 7.Reference Sensor Points = " " RB2 Point Collection Array 8.Linkage.Linked? = "FALSE" RB2 Point Collection Array 8.Linkage.Linked RB Name = "" RB2 Point Collection Array 8.Linkage.Linked Index = "0" RB2 Point Collection Array 8.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 8.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 8.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 8.Timing.Number of Data Points = "10" RB2 Point Collection Array 8.Point Collection Type = "0" RB2 Point Collection Array 8.Fitting = "" RB2 Point Collection Array 8.Digitizer Name = "Digitizer" RB2 Point Collection Array 8.Digitizer Points = " " RB2 Point Collection Array 8.Reference Sensor Name = "" RB2 Point Collection Array 8.Reference Sensor Points = " " RB2 Point Collection Array 9.Linkage.Linked? = "FALSE" RB2 Point Collection Array 9.Linkage.Linked RB Name = "" RB2 Point Collection Array 9.Linkage.Linked Index = "0" RB2 Point Collection Array 9.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 9.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 9.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 9.Timing.Number of Data Points = "10" RB2 Point Collection Array 9.Point Collection Type = "0" RB2 Point Collection Array 9.Fitting = "" RB2 Point Collection Array 9.Digitizer Name = "Digitizer" RB2 Point Collection Array 9.Digitizer Points = " " RB2 Point Collection Array 9.Reference Sensor Name = "" RB2 Point Collection Array 9.Reference Sensor Points = " " RB2 Point Collection Array 10.Linkage.Linked? = "FALSE" RB2 Point Collection Array 10.Linkage.Linked RB Name = "" RB2 Point Collection Array 10.Linkage.Linked Index = "0" RB2 Point Collection Array 10.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 10.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 10.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 10.Timing.Number of Data Points = "10" RB2 Point Collection Array 10.Point Collection Type = "0" RB2 Point Collection Array 10.Fitting = "" RB2 Point Collection Array 10.Digitizer Name = "Digitizer" RB2 Point Collection Array 10.Digitizer Points = " " RB2 Point Collection Array 10.Reference Sensor Name = "" RB2 Point Collection Array 10.Reference Sensor Points = " " RB2 Point Collection Array 11.Linkage.Linked? = "FALSE" RB2 Point Collection Array 11.Linkage.Linked RB Name = "" RB2 Point Collection Array 11.Linkage.Linked Index = "0" RB2 Point Collection Array 11.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 11.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 11.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 11.Timing.Number of Data Points = "10" RB2 Point Collection Array 11.Point Collection Type = "0" RB2 Point Collection Array 11.Fitting = "" RB2 Point Collection Array 11.Digitizer Name = "Digitizer" RB2 Point Collection Array 11.Digitizer Points = " " RB2 Point Collection Array 11.Reference Sensor Name = "" RB2 Point Collection Array 11.Reference Sensor Points = " " RB2 Point Collection Array 12.Linkage.Linked? = "FALSE" RB2 Point Collection Array 12.Linkage.Linked RB Name = "" RB2 Point Collection Array 12.Linkage.Linked Index = "0" RB2 Point Collection Array 12.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 12.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 12.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 12.Timing.Number of Data Points = "10" RB2 Point Collection Array 12.Point Collection Type = "0" RB2 Point Collection Array 12.Fitting = "" RB2 Point Collection Array 12.Digitizer Name = "Digitizer" RB2 Point Collection Array 12.Digitizer Points = " " RB2 Point Collection Array 12.Reference Sensor Name = "" RB2 Point Collection Array 12.Reference Sensor Points = " " RB2 Point Collection Array 13.Linkage.Linked? = "FALSE" RB2 Point Collection Array 13.Linkage.Linked RB Name = "" RB2 Point Collection Array 13.Linkage.Linked Index = "0" RB2 Point Collection Array 13.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 13.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 13.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 13.Timing.Number of Data Points = "10" RB2 Point Collection Array 13.Point Collection Type = "0" RB2 Point Collection Array 13.Fitting = "" RB2 Point Collection Array 13.Digitizer Name = "Digitizer" RB2 Point Collection Array 13.Digitizer Points = " " RB2 Point Collection Array 13.Reference Sensor Name = "" RB2 Point Collection Array 13.Reference Sensor Points = " " RB1 Fid Pt Collection Array. = "3" RB1 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 0.Point Collection Type = "0" RB1 Fid Pt Collection Array 0.Fitting = "" RB1 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 0.Digitizer Points = " " RB1 Fid Pt Collection Array 0.Reference Sensor Name = "" RB1 Fid Pt Collection Array 0.Reference Sensor Points = " " RB1 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 1.Point Collection Type = "0" RB1 Fid Pt Collection Array 1.Fitting = "" RB1 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 1.Digitizer Points = " " RB1 Fid Pt Collection Array 1.Reference Sensor Name = "" RB1 Fid Pt Collection Array 1.Reference Sensor Points = " " RB1 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 2.Point Collection Type = "0" RB1 Fid Pt Collection Array 2.Fitting = "" RB1 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 2.Digitizer Points = " " RB1 Fid Pt Collection Array 2.Reference Sensor Name = "" RB1 Fid Pt Collection Array 2.Reference Sensor Points = " " RB2 Fid Pt Collection Array. = "3" RB2 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 0.Point Collection Type = "0" RB2 Fid Pt Collection Array 0.Fitting = "" RB2 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 0.Digitizer Points = " " RB2 Fid Pt Collection Array 0.Reference Sensor Name = "" RB2 Fid Pt Collection Array 0.Reference Sensor Points = " " RB2 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 1.Point Collection Type = "0" RB2 Fid Pt Collection Array 1.Fitting = "" RB2 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 1.Digitizer Points = " " RB2 Fid Pt Collection Array 1.Reference Sensor Name = "" RB2 Fid Pt Collection Array 1.Reference Sensor Points = " " RB2 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 2.Point Collection Type = "0" RB2 Fid Pt Collection Array 2.Fitting = "" RB2 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 2.Digitizer Points = " " RB2 Fid Pt Collection Array 2.Reference Sensor Name = "" RB2 Fid Pt Collection Array 2.Reference Sensor Points = " " Rigid Body 1 CS Definition Name = "" Rigid Body 2 CS Definition Name = "Retractor" [Retractor LC2REF] Version = "2.3.1.0.0" Class = "Surgical Tool Load Cell 2 REF.lvclass" Name = "Retractor LC2REF" Description = "This is the default 6-DOF position state using a single sensor" Notes = "This state is the relative position of two rigid bodies given the position in space of a position sensors. It stores the relative (static) relationship between the rigid bodies and the sensor and then given the sensor position it can calculate the relative positions. The position sensor in the included sensor array is the relative rigid body (rigid body 2) and the x, y, z, roll, pitch, yaw relationship is the position of the rigid body 2 relative to he fixed rigid body 1. Input and output units are expected to be mm and deg.\0A\0AThis state assumes that Rigid Body 1 is static and Rigid Body 2 is dynamic. This is a requirement to be able to measure relative position with a single sensor. This state does NOT assume that the digitizer for the point collection is in the same reference frame as the position sensor. However, it does assume that the digitizer is in the WORLD1 reference frame. In other words, the static Rigid Body (rigid body 1) and the digitizer are in the same World frame. Digitization of Rigid Body 2 will be done in the World1 reference frame (since that is what the digitizer operates in) but the T_World1_World2 matrix will need to be utilized to calculate the T_Sensor2_RB2 matrix." Channel Names. = "6" Channel Names 0 = "x" Channel Names 1 = "y" Channel Names 2 = "z" Channel Names 3 = "roll" Channel Names 4 = "pitch" Channel Names 5 = "yaw" Channel Units. = "6" Channel Units 0 = "mm" Channel Units 1 = "mm" Channel Units 2 = "mm" Channel Units 3 = "deg" Channel Units 4 = "deg" Channel Units 5 = "deg" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "1" Included Sensors 0 = "Retractor Pos" Included States. = "0" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Surgical Tool Load Cell 2 REF" Data Description Parameters.Data Name = "Retractor LC2REF" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Retractor LC2REF" Enable State = "TRUE" Collected Points Rigid Body 1 (m) = " " Collected Points Rigid Body 1 Position Sensor (m,rad) = " " Collected Points Rigid Body 2 (m) = " 0.9081471558 0.7087253418 0.1316953888 0.8961853027 0.7207962036 0.1235094681 0.8557269897 0.7237429810 0.0969681320 0.8715502319 0.7174944458 0.1169123459 0.8981667480 0.7132767334 0.1194030991 0.8977782593 0.7164236450 0.1300392151" Collected Points Rigid Body 2 Position Sensor (m,rad) = " 0.9377352295 0.6900430908 0.1143783875 1.6613382112 -0.2032311325 1.0997702153 0.9181355591 0.7188657227 0.1120139694 1.3879889601 0.1435690336 1.4017451192 0.8882992554 0.7139616089 0.0803310928 1.5374223910 0.5895898435 1.1782222805 0.8984372559 0.7062500000 0.1004231567 -2.8388503598 1.4665804418 2.7336136851 0.9319857178 0.7080089111 0.1176712952 -0.8474104686 1.3130257691 -1.3990812923 0.9374340210 0.7201704102 0.1295723877 -1.5378841831 0.9282558501 -1.7532269894" Position Offset (m,rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T_Sensor1_RB1 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_Sensor2_RB2 = " -0.0519240178 -0.9585551779 -0.2801354446 -0.0049985200 -0.9804058437 -0.0044470313 0.1969380753 0.0023504129 -0.1900217829 0.2848722430 -0.9395421902 -0.0364838608 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Collected Point Names - Rigid Body 1. = "0" Collected Point Names - Rigid Body 2. = "6" Collected Point Names - Rigid Body 2 0 = "RetractDivots-Handle01" Collected Point Names - Rigid Body 2 1 = "RetractDivots-Handle02" Collected Point Names - Rigid Body 2 2 = "RetractDivots-Handle03" Collected Point Names - Rigid Body 2 3 = "RetractDivots-Handle04" Collected Point Names - Rigid Body 2 4 = "RetractDivots-Handle05" Collected Point Names - Rigid Body 2 5 = "RetractDivots-Handle06" Collected Point Images - Rigid Body 1. = "3" Collected Point Images - Rigid Body 1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Point Images - Rigid Body 1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Point Images - Rigid Body 1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Point Images - Rigid Body 2. = "6" Collected Point Images - Rigid Body 2 0 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RetractDivots-Handle01.png" Collected Point Images - Rigid Body 2 1 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RetractDivots-Handle02.png" Collected Point Images - Rigid Body 2 2 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RetractDivots-Handle03.png" Collected Point Images - Rigid Body 2 3 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RetractDivots-Handle04.png" Collected Point Images - Rigid Body 2 4 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RetractDivots-Handle05.png" Collected Point Images - Rigid Body 2 5 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RetractDivots-Handle06.png" T_World1_World2 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Rigid Body 1 Name = "World" Rigid Body 2 Name = "Retractor LC" Initial Collected Points Rigid Body 1 (m) = " " Initial Collected Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Fiducials Enabled RB1 = "FALSE" Fiducials Enabled RB2 = "FALSE" Fiducial Type RB1 = "Manual Digitization" Fiducial Type RB2 = "Manual Digitization" Rigid Body 1 Fiducial Sensor Name = "" Rigid Body 2 Fiducial Sensor Name = "" Rigid Body 1 Number of Fiducials = "0.0000000000" Rigid Body 2 Number of Fiducials = "0.0000000000" Initial Manual Fiducial Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Manual Fiducial Points Rigid Body 1 (m) = " " Final Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 2 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 2 (m, rady) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T RB1-OPT_RB1-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T RB2-OPT_RB2-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_World1_World2 for Fiducials = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen1_RB1 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen2_RB2 = " -0.0519240178 -0.9585551779 -0.2801354446 -0.0049985200 -0.9804058437 -0.0044470313 0.1969380753 0.0023504129 -0.1900217829 0.2848722430 -0.9395421902 -0.0364838608 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Digitization Phase = "Final" Collected 6-DOF Fiducial Point Images - RB1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Images - RB2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Names - RB1. = "0" Collected Manual Fiducial Point Names - RB2. = "0" Collected Manual Fiducial Point Images - RB1. = "3" Collected Manual Fiducial Point Images - RB1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2. = "3" Collected Manual Fiducial Point Images - RB2 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Names - RB1 = "" Collected 6-DOF Fiducial Point Names - RB2 = "" RB1 Point Collection Array. = "0" RB2 Point Collection Array. = "6" RB2 Point Collection Array 0.Linkage.Linked? = "FALSE" RB2 Point Collection Array 0.Linkage.Linked RB Name = "" RB2 Point Collection Array 0.Linkage.Linked Index = "0" RB2 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 0.Timing.Number of Data Points = "10" RB2 Point Collection Array 0.Point Collection Type = "0" RB2 Point Collection Array 0.Fitting = "" RB2 Point Collection Array 0.Digitizer Name = "Digitizer" RB2 Point Collection Array 0.Digitizer Points = " " RB2 Point Collection Array 0.Reference Sensor Name = "" RB2 Point Collection Array 0.Reference Sensor Points = " " RB2 Point Collection Array 1.Linkage.Linked? = "FALSE" RB2 Point Collection Array 1.Linkage.Linked RB Name = "" RB2 Point Collection Array 1.Linkage.Linked Index = "0" RB2 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 1.Timing.Number of Data Points = "10" RB2 Point Collection Array 1.Point Collection Type = "0" RB2 Point Collection Array 1.Fitting = "" RB2 Point Collection Array 1.Digitizer Name = "Digitizer" RB2 Point Collection Array 1.Digitizer Points = " " RB2 Point Collection Array 1.Reference Sensor Name = "" RB2 Point Collection Array 1.Reference Sensor Points = " " RB2 Point Collection Array 2.Linkage.Linked? = "FALSE" RB2 Point Collection Array 2.Linkage.Linked RB Name = "" RB2 Point Collection Array 2.Linkage.Linked Index = "0" RB2 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 2.Timing.Number of Data Points = "10" RB2 Point Collection Array 2.Point Collection Type = "0" RB2 Point Collection Array 2.Fitting = "" RB2 Point Collection Array 2.Digitizer Name = "Digitizer" RB2 Point Collection Array 2.Digitizer Points = " " RB2 Point Collection Array 2.Reference Sensor Name = "" RB2 Point Collection Array 2.Reference Sensor Points = " " RB2 Point Collection Array 3.Linkage.Linked? = "FALSE" RB2 Point Collection Array 3.Linkage.Linked RB Name = "" RB2 Point Collection Array 3.Linkage.Linked Index = "0" RB2 Point Collection Array 3.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 3.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 3.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 3.Timing.Number of Data Points = "10" RB2 Point Collection Array 3.Point Collection Type = "0" RB2 Point Collection Array 3.Fitting = "" RB2 Point Collection Array 3.Digitizer Name = "Digitizer" RB2 Point Collection Array 3.Digitizer Points = " " RB2 Point Collection Array 3.Reference Sensor Name = "" RB2 Point Collection Array 3.Reference Sensor Points = " " RB2 Point Collection Array 4.Linkage.Linked? = "FALSE" RB2 Point Collection Array 4.Linkage.Linked RB Name = "" RB2 Point Collection Array 4.Linkage.Linked Index = "0" RB2 Point Collection Array 4.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 4.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 4.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 4.Timing.Number of Data Points = "10" RB2 Point Collection Array 4.Point Collection Type = "0" RB2 Point Collection Array 4.Fitting = "" RB2 Point Collection Array 4.Digitizer Name = "Digitizer" RB2 Point Collection Array 4.Digitizer Points = " " RB2 Point Collection Array 4.Reference Sensor Name = "" RB2 Point Collection Array 4.Reference Sensor Points = " " RB2 Point Collection Array 5.Linkage.Linked? = "FALSE" RB2 Point Collection Array 5.Linkage.Linked RB Name = "" RB2 Point Collection Array 5.Linkage.Linked Index = "0" RB2 Point Collection Array 5.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 5.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 5.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 5.Timing.Number of Data Points = "10" RB2 Point Collection Array 5.Point Collection Type = "0" RB2 Point Collection Array 5.Fitting = "" RB2 Point Collection Array 5.Digitizer Name = "Digitizer" RB2 Point Collection Array 5.Digitizer Points = " " RB2 Point Collection Array 5.Reference Sensor Name = "" RB2 Point Collection Array 5.Reference Sensor Points = " " RB1 Fid Pt Collection Array. = "3" RB1 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 0.Point Collection Type = "0" RB1 Fid Pt Collection Array 0.Fitting = "" RB1 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 0.Digitizer Points = " " RB1 Fid Pt Collection Array 0.Reference Sensor Name = "" RB1 Fid Pt Collection Array 0.Reference Sensor Points = " " RB1 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 1.Point Collection Type = "0" RB1 Fid Pt Collection Array 1.Fitting = "" RB1 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 1.Digitizer Points = " " RB1 Fid Pt Collection Array 1.Reference Sensor Name = "" RB1 Fid Pt Collection Array 1.Reference Sensor Points = " " RB1 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 2.Point Collection Type = "0" RB1 Fid Pt Collection Array 2.Fitting = "" RB1 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 2.Digitizer Points = " " RB1 Fid Pt Collection Array 2.Reference Sensor Name = "" RB1 Fid Pt Collection Array 2.Reference Sensor Points = " " RB2 Fid Pt Collection Array. = "3" RB2 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 0.Point Collection Type = "0" RB2 Fid Pt Collection Array 0.Fitting = "" RB2 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 0.Digitizer Points = " " RB2 Fid Pt Collection Array 0.Reference Sensor Name = "" RB2 Fid Pt Collection Array 0.Reference Sensor Points = " " RB2 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 1.Point Collection Type = "0" RB2 Fid Pt Collection Array 1.Fitting = "" RB2 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 1.Digitizer Points = " " RB2 Fid Pt Collection Array 1.Reference Sensor Name = "" RB2 Fid Pt Collection Array 1.Reference Sensor Points = " " RB2 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 2.Point Collection Type = "0" RB2 Fid Pt Collection Array 2.Fitting = "" RB2 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 2.Digitizer Points = " " RB2 Fid Pt Collection Array 2.Reference Sensor Name = "" RB2 Fid Pt Collection Array 2.Reference Sensor Points = " " Rigid Body 1 CS Definition Name = "" Rigid Body 2 CS Definition Name = "" Gravity Compensation = "FALSE" 6-DOF Load Sensor - Rigid Body = "Rigid Body 2" Dynamic Load Transformation = "FALSE" Divot Points in LC Frame = " -0.0073020000 -0.0126390000 -0.0055900000 -0.0145910000 -0.0000004999 -0.0055900000 -0.0072900000 0.0126330000 -0.0055900000 0.0073010000 0.0126260000 -0.0055900000 0.0145910000 -0.0000134999 -0.0055900000 0.0072890000 -0.0126460000 -0.0055900000" [Retractor Load] Version = "2.0" Class = "Surgical Tool 6 DOF Load.lvclass" Name = "Retractor Load" Description = "This is the default 6-DOF load state" Notes = "This state is the 6-DOF loads acting on a rigid body given a 6-DOF Position state describing the position of said rigid body with respect to the position of a 6-DOF load cell and the load cell sensor output. It can transform the loads to the rigid body coordinate system with or without gravity compensation. Input and output units are expected to be mm and deg and N and Nm.\0AWhen performing the static loads transform the state needs to be appropriately formulated." Channel Names. = "6" Channel Names 0 = "Fx" Channel Names 1 = "Fy" Channel Names 2 = "Fz" Channel Names 3 = "Mx" Channel Names 4 = "My" Channel Names 5 = "Mz" Channel Units. = "6" Channel Units 0 = "N" Channel Units 1 = "N" Channel Units 2 = "N" Channel Units 3 = "Nm" Channel Units 4 = "Nm" Channel Units 5 = "Nm" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "1" Included Sensors 0 = "Retractor LC" Included States. = "2" Included States 0 = "Retractor LC2REF" Included States 1 = "Retractor" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Surgical Tool 6 DOF Load" Data Description Parameters.Data Name = "Retractor Load" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Retractor Load" Enable State = "TRUE" Gravity Vector = " 0.0000000000 0.0000000000 -1.0000000000" Gravity Compensation = "FALSE" Inertial Compensation = "FALSE" 6-DOF Load Sensor - Rigid Body = "Rigid Body 2" Load Cell Offsets (N, Nm) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Center of Mass in Load Cell CS (mm) = " 0.0000000000 0.0000000000 0.0000000000" Load Cell Mass (N) = "0.0000000000" Load Cell Data Array = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Dynamic Load Transformation = "FALSE" Static Transformation Matrix- T_REF_LOAD = " -0.1155411492 0.2103014237 -0.9707850195 0.0040689902 -0.9857660570 0.0958886112 0.1380965424 0.0015453494 0.1221291268 0.9729227541 0.1962289249 0.0566182804 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Gravity Compensation Library Configuration File Path = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Classes/State/6-DOF/6-DOF Load/Gravity_Compensation_Library.ini" Gravity Compensation Type = "" [Scalpel] Version = "2.3" Class = "Surgical Tool Position.lvclass" Name = "Scalpel" Description = "This is the position state for the Ultrasound Probe" Notes = "This is the position state that defines the relative relationship between a bone and the Ultrasound Probe. Rigid Body 1 is the bone and rigid body 2 is the coordinate system as defined by the ultrasound probe." Channel Names. = "6" Channel Names 0 = "x" Channel Names 1 = "y" Channel Names 2 = "z" Channel Names 3 = "roll" Channel Names 4 = "pitch" Channel Names 5 = "yaw" Channel Units. = "6" Channel Units 0 = "mm" Channel Units 1 = "mm" Channel Units 2 = "mm" Channel Units 3 = "deg" Channel Units 4 = "deg" Channel Units 5 = "deg" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "2" Included Sensors 0 = "Femur" Included Sensors 1 = "Scalpel Pos" Included States. = "0" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Surgical Tool Position" Data Description Parameters.Data Name = "Scalpel" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Scalpel" Enable State = "TRUE" Collected Points Rigid Body 1 (m) = " 0.8098500366 0.4765617371 0.1202015686 0.8130097656 0.3951024780 0.1287006378 1.2546713867 0.4252901306 0.1662164154 1.2920426025 0.4256895142 0.1372024841 1.2398444824 0.4360792542 0.1011189346 1.2336650391 0.4284200134 0.1582896118" Collected Points Rigid Body 1 Position Sensor (m,rad) = " 1.2743641357 0.5254555054 0.1577446442 1.1889727960 -0.7727368298 2.9731703515 1.2744483643 0.5255729980 0.1578283997 1.1884582733 -0.7723162501 2.9720456986 1.2742990723 0.5254907837 0.1577628174 1.1898267386 -0.7734403704 2.9727900521 1.2742718506 0.5255087280 0.1577700195 1.1887747900 -0.7734998254 2.9719255900 1.2740421143 0.5255019531 0.1577745819 1.1896517690 -0.7737301889 2.9723967032 1.2741342773 0.5254696655 0.1577571411 1.1897488412 -0.7735054181 2.9727855247" Collected Points Rigid Body 2 (m) = " 1.0326295166 0.6767890015 0.1269192810 0.9778482666 0.6254609985 0.1521207886 0.9211844482 0.5517738647 0.1721189117" Collected Points Rigid Body 2 Position Sensor (m,rad) = " 0.9774116821 0.6237868652 0.1233449020 1.2440174063 -1.1985150354 -0.4287027559 0.9535670166 0.5829971313 0.1536089325 1.1314590360 -0.7567563319 0.0130004206 0.9598695068 0.5437457275 0.1930781403 -0.3281606683 -0.2914554842 -0.4560947659" Position Offset (m,rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T_Sensor1_RB1 = " -0.0345200751 -0.7307291107 -0.6817942000 0.2927516112 0.5310051288 -0.5913505905 0.6069085865 -0.2459303416 -0.8466651744 -0.3410856870 0.4084343723 -0.2780039980 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_Sensor2_RB2 = " 0.7324897804 -0.1633751084 -0.6608837232 0.0135828263 0.1604656298 0.9848582886 -0.0656119892 -0.0007949212 0.6615961784 -0.0579890113 0.7476147211 -0.0754048196 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Collected Point Names - Rigid Body 1. = "6" Collected Point Names - Rigid Body 1 0 = "Lateral Femoral Epicondyle" Collected Point Names - Rigid Body 1 1 = "Medial Femoral Epicondyle" Collected Point Names - Rigid Body 1 2 = "Femoral Head Point 1" Collected Point Names - Rigid Body 1 3 = "Femoral Head Point 2" Collected Point Names - Rigid Body 1 4 = "Femoral Head Point 3" Collected Point Names - Rigid Body 1 5 = "Femoral Head Point 4" Collected Point Names - Rigid Body 2. = "3" Collected Point Names - Rigid Body 2 0 = "Origin" Collected Point Names - Rigid Body 2 1 = "Flag" Collected Point Names - Rigid Body 2 2 = "Cylinder End" Collected Point Images - Rigid Body 1. = "6" Collected Point Images - Rigid Body 1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/RKnee_LFE.jpg" Collected Point Images - Rigid Body 1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/RKnee_MFE.jpg" Collected Point Images - Rigid Body 1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt1.JPG" Collected Point Images - Rigid Body 1 3 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt2.JPG" Collected Point Images - Rigid Body 1 4 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt3.JPG" Collected Point Images - Rigid Body 1 5 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/simVITRO/Modules/Knee/Setup/Images/femur_pt4.JPG" Collected Point Images - Rigid Body 2. = "3" Collected Point Images - Rigid Body 2 0 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationScalpel/scalpelOrigin.jpg" Collected Point Images - Rigid Body 2 1 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationScalpel/scalpelFlag.jpg" Collected Point Images - Rigid Body 2 2 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/RegistrationScalpel/scalpelCyl.jpg" T_World1_World2 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Rigid Body 1 Name = "Femur" Rigid Body 2 Name = "Scalpel" Initial Collected Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Collected Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Fiducials Enabled RB1 = "FALSE" Fiducials Enabled RB2 = "FALSE" Fiducial Type RB1 = "Manual Digitization" Fiducial Type RB2 = "Manual Digitization" Rigid Body 1 Fiducial Sensor Name = "" Rigid Body 2 Fiducial Sensor Name = "" Rigid Body 1 Number of Fiducials = "0.0000000000" Rigid Body 2 Number of Fiducials = "0.0000000000" Initial Manual Fiducial Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Manual Fiducial Points Rigid Body 1 (m) = " " Final Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 2 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 2 (m, rady) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T RB1-OPT_RB1-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T RB2-OPT_RB2-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_World1_World2 for Fiducials = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen1_RB1 = " -0.0345200751 -0.7307291107 -0.6817942000 0.2927516112 0.5310051288 -0.5913505905 0.6069085865 -0.2459303416 -0.8466651744 -0.3410856870 0.4084343723 -0.2780039980 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen2_RB2 = " 0.7324897804 -0.1633751084 -0.6608837232 0.0135828263 0.1604656298 0.9848582886 -0.0656119892 -0.0007949212 0.6615961784 -0.0579890113 0.7476147211 -0.0754048196 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Digitization Phase = "Final" Collected 6-DOF Fiducial Point Images - RB1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Images - RB2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Names - RB1. = "0" Collected Manual Fiducial Point Names - RB2. = "0" Collected Manual Fiducial Point Images - RB1. = "3" Collected Manual Fiducial Point Images - RB1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2. = "3" Collected Manual Fiducial Point Images - RB2 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Names - RB1 = "" Collected 6-DOF Fiducial Point Names - RB2 = "" RB1 Point Collection Array. = "6" RB1 Point Collection Array 0.Linkage.Linked? = "FALSE" RB1 Point Collection Array 0.Linkage.Linked RB Name = "" RB1 Point Collection Array 0.Linkage.Linked Index = "0" RB1 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 0.Timing.Number of Data Points = "10" RB1 Point Collection Array 0.Point Collection Type = "0" RB1 Point Collection Array 0.Fitting = "" RB1 Point Collection Array 0.Digitizer Name = "Digitizer" RB1 Point Collection Array 0.Digitizer Points = " " RB1 Point Collection Array 0.Reference Sensor Name = "" RB1 Point Collection Array 0.Reference Sensor Points = " " RB1 Point Collection Array 1.Linkage.Linked? = "FALSE" RB1 Point Collection Array 1.Linkage.Linked RB Name = "" RB1 Point Collection Array 1.Linkage.Linked Index = "0" RB1 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 1.Timing.Number of Data Points = "10" RB1 Point Collection Array 1.Point Collection Type = "0" RB1 Point Collection Array 1.Fitting = "" RB1 Point Collection Array 1.Digitizer Name = "Digitizer" RB1 Point Collection Array 1.Digitizer Points = " " RB1 Point Collection Array 1.Reference Sensor Name = "" RB1 Point Collection Array 1.Reference Sensor Points = " " RB1 Point Collection Array 2.Linkage.Linked? = "FALSE" RB1 Point Collection Array 2.Linkage.Linked RB Name = "" RB1 Point Collection Array 2.Linkage.Linked Index = "0" RB1 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 2.Timing.Number of Data Points = "10" RB1 Point Collection Array 2.Point Collection Type = "0" RB1 Point Collection Array 2.Fitting = "" RB1 Point Collection Array 2.Digitizer Name = "Digitizer" RB1 Point Collection Array 2.Digitizer Points = " " RB1 Point Collection Array 2.Reference Sensor Name = "" RB1 Point Collection Array 2.Reference Sensor Points = " " RB1 Point Collection Array 3.Linkage.Linked? = "FALSE" RB1 Point Collection Array 3.Linkage.Linked RB Name = "" RB1 Point Collection Array 3.Linkage.Linked Index = "0" RB1 Point Collection Array 3.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 3.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 3.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 3.Timing.Number of Data Points = "10" RB1 Point Collection Array 3.Point Collection Type = "0" RB1 Point Collection Array 3.Fitting = "" RB1 Point Collection Array 3.Digitizer Name = "Digitizer" RB1 Point Collection Array 3.Digitizer Points = " " RB1 Point Collection Array 3.Reference Sensor Name = "" RB1 Point Collection Array 3.Reference Sensor Points = " " RB1 Point Collection Array 4.Linkage.Linked? = "FALSE" RB1 Point Collection Array 4.Linkage.Linked RB Name = "" RB1 Point Collection Array 4.Linkage.Linked Index = "0" RB1 Point Collection Array 4.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 4.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 4.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 4.Timing.Number of Data Points = "10" RB1 Point Collection Array 4.Point Collection Type = "0" RB1 Point Collection Array 4.Fitting = "" RB1 Point Collection Array 4.Digitizer Name = "Digitizer" RB1 Point Collection Array 4.Digitizer Points = " " RB1 Point Collection Array 4.Reference Sensor Name = "" RB1 Point Collection Array 4.Reference Sensor Points = " " RB1 Point Collection Array 5.Linkage.Linked? = "FALSE" RB1 Point Collection Array 5.Linkage.Linked RB Name = "" RB1 Point Collection Array 5.Linkage.Linked Index = "0" RB1 Point Collection Array 5.Timing.Digitization Delay (s) = "0.0000000000" RB1 Point Collection Array 5.Timing.Capture Time (s) = "30.0000000000" RB1 Point Collection Array 5.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Point Collection Array 5.Timing.Number of Data Points = "10" RB1 Point Collection Array 5.Point Collection Type = "0" RB1 Point Collection Array 5.Fitting = "" RB1 Point Collection Array 5.Digitizer Name = "Digitizer" RB1 Point Collection Array 5.Digitizer Points = " " RB1 Point Collection Array 5.Reference Sensor Name = "" RB1 Point Collection Array 5.Reference Sensor Points = " " RB2 Point Collection Array. = "14" RB2 Point Collection Array 0.Linkage.Linked? = "FALSE" RB2 Point Collection Array 0.Linkage.Linked RB Name = "" RB2 Point Collection Array 0.Linkage.Linked Index = "0" RB2 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 0.Timing.Number of Data Points = "10" RB2 Point Collection Array 0.Point Collection Type = "0" RB2 Point Collection Array 0.Fitting = "" RB2 Point Collection Array 0.Digitizer Name = "Digitizer" RB2 Point Collection Array 0.Digitizer Points = " " RB2 Point Collection Array 0.Reference Sensor Name = "" RB2 Point Collection Array 0.Reference Sensor Points = " " RB2 Point Collection Array 1.Linkage.Linked? = "FALSE" RB2 Point Collection Array 1.Linkage.Linked RB Name = "" RB2 Point Collection Array 1.Linkage.Linked Index = "0" RB2 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 1.Timing.Number of Data Points = "10" RB2 Point Collection Array 1.Point Collection Type = "0" RB2 Point Collection Array 1.Fitting = "" RB2 Point Collection Array 1.Digitizer Name = "Digitizer" RB2 Point Collection Array 1.Digitizer Points = " " RB2 Point Collection Array 1.Reference Sensor Name = "" RB2 Point Collection Array 1.Reference Sensor Points = " " RB2 Point Collection Array 2.Linkage.Linked? = "FALSE" RB2 Point Collection Array 2.Linkage.Linked RB Name = "" RB2 Point Collection Array 2.Linkage.Linked Index = "0" RB2 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 2.Timing.Number of Data Points = "10" RB2 Point Collection Array 2.Point Collection Type = "0" RB2 Point Collection Array 2.Fitting = "" RB2 Point Collection Array 2.Digitizer Name = "Digitizer" RB2 Point Collection Array 2.Digitizer Points = " " RB2 Point Collection Array 2.Reference Sensor Name = "" RB2 Point Collection Array 2.Reference Sensor Points = " " RB2 Point Collection Array 3.Linkage.Linked? = "FALSE" RB2 Point Collection Array 3.Linkage.Linked RB Name = "" RB2 Point Collection Array 3.Linkage.Linked Index = "0" RB2 Point Collection Array 3.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 3.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 3.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 3.Timing.Number of Data Points = "10" RB2 Point Collection Array 3.Point Collection Type = "0" RB2 Point Collection Array 3.Fitting = "" RB2 Point Collection Array 3.Digitizer Name = "Digitizer" RB2 Point Collection Array 3.Digitizer Points = " " RB2 Point Collection Array 3.Reference Sensor Name = "" RB2 Point Collection Array 3.Reference Sensor Points = " " RB2 Point Collection Array 4.Linkage.Linked? = "FALSE" RB2 Point Collection Array 4.Linkage.Linked RB Name = "" RB2 Point Collection Array 4.Linkage.Linked Index = "0" RB2 Point Collection Array 4.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 4.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 4.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 4.Timing.Number of Data Points = "10" RB2 Point Collection Array 4.Point Collection Type = "0" RB2 Point Collection Array 4.Fitting = "" RB2 Point Collection Array 4.Digitizer Name = "Digitizer" RB2 Point Collection Array 4.Digitizer Points = " " RB2 Point Collection Array 4.Reference Sensor Name = "" RB2 Point Collection Array 4.Reference Sensor Points = " " RB2 Point Collection Array 5.Linkage.Linked? = "FALSE" RB2 Point Collection Array 5.Linkage.Linked RB Name = "" RB2 Point Collection Array 5.Linkage.Linked Index = "0" RB2 Point Collection Array 5.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 5.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 5.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 5.Timing.Number of Data Points = "10" RB2 Point Collection Array 5.Point Collection Type = "0" RB2 Point Collection Array 5.Fitting = "" RB2 Point Collection Array 5.Digitizer Name = "Digitizer" RB2 Point Collection Array 5.Digitizer Points = " " RB2 Point Collection Array 5.Reference Sensor Name = "" RB2 Point Collection Array 5.Reference Sensor Points = " " RB2 Point Collection Array 6.Linkage.Linked? = "FALSE" RB2 Point Collection Array 6.Linkage.Linked RB Name = "" RB2 Point Collection Array 6.Linkage.Linked Index = "0" RB2 Point Collection Array 6.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 6.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 6.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 6.Timing.Number of Data Points = "10" RB2 Point Collection Array 6.Point Collection Type = "0" RB2 Point Collection Array 6.Fitting = "" RB2 Point Collection Array 6.Digitizer Name = "Digitizer" RB2 Point Collection Array 6.Digitizer Points = " " RB2 Point Collection Array 6.Reference Sensor Name = "" RB2 Point Collection Array 6.Reference Sensor Points = " " RB2 Point Collection Array 7.Linkage.Linked? = "FALSE" RB2 Point Collection Array 7.Linkage.Linked RB Name = "" RB2 Point Collection Array 7.Linkage.Linked Index = "0" RB2 Point Collection Array 7.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 7.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 7.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 7.Timing.Number of Data Points = "10" RB2 Point Collection Array 7.Point Collection Type = "0" RB2 Point Collection Array 7.Fitting = "" RB2 Point Collection Array 7.Digitizer Name = "Digitizer" RB2 Point Collection Array 7.Digitizer Points = " " RB2 Point Collection Array 7.Reference Sensor Name = "" RB2 Point Collection Array 7.Reference Sensor Points = " " RB2 Point Collection Array 8.Linkage.Linked? = "FALSE" RB2 Point Collection Array 8.Linkage.Linked RB Name = "" RB2 Point Collection Array 8.Linkage.Linked Index = "0" RB2 Point Collection Array 8.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 8.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 8.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 8.Timing.Number of Data Points = "10" RB2 Point Collection Array 8.Point Collection Type = "0" RB2 Point Collection Array 8.Fitting = "" RB2 Point Collection Array 8.Digitizer Name = "Digitizer" RB2 Point Collection Array 8.Digitizer Points = " " RB2 Point Collection Array 8.Reference Sensor Name = "" RB2 Point Collection Array 8.Reference Sensor Points = " " RB2 Point Collection Array 9.Linkage.Linked? = "FALSE" RB2 Point Collection Array 9.Linkage.Linked RB Name = "" RB2 Point Collection Array 9.Linkage.Linked Index = "0" RB2 Point Collection Array 9.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 9.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 9.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 9.Timing.Number of Data Points = "10" RB2 Point Collection Array 9.Point Collection Type = "0" RB2 Point Collection Array 9.Fitting = "" RB2 Point Collection Array 9.Digitizer Name = "Digitizer" RB2 Point Collection Array 9.Digitizer Points = " " RB2 Point Collection Array 9.Reference Sensor Name = "" RB2 Point Collection Array 9.Reference Sensor Points = " " RB2 Point Collection Array 10.Linkage.Linked? = "FALSE" RB2 Point Collection Array 10.Linkage.Linked RB Name = "" RB2 Point Collection Array 10.Linkage.Linked Index = "0" RB2 Point Collection Array 10.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 10.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 10.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 10.Timing.Number of Data Points = "10" RB2 Point Collection Array 10.Point Collection Type = "0" RB2 Point Collection Array 10.Fitting = "" RB2 Point Collection Array 10.Digitizer Name = "Digitizer" RB2 Point Collection Array 10.Digitizer Points = " " RB2 Point Collection Array 10.Reference Sensor Name = "" RB2 Point Collection Array 10.Reference Sensor Points = " " RB2 Point Collection Array 11.Linkage.Linked? = "FALSE" RB2 Point Collection Array 11.Linkage.Linked RB Name = "" RB2 Point Collection Array 11.Linkage.Linked Index = "0" RB2 Point Collection Array 11.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 11.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 11.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 11.Timing.Number of Data Points = "10" RB2 Point Collection Array 11.Point Collection Type = "0" RB2 Point Collection Array 11.Fitting = "" RB2 Point Collection Array 11.Digitizer Name = "Digitizer" RB2 Point Collection Array 11.Digitizer Points = " " RB2 Point Collection Array 11.Reference Sensor Name = "" RB2 Point Collection Array 11.Reference Sensor Points = " " RB2 Point Collection Array 12.Linkage.Linked? = "FALSE" RB2 Point Collection Array 12.Linkage.Linked RB Name = "" RB2 Point Collection Array 12.Linkage.Linked Index = "0" RB2 Point Collection Array 12.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 12.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 12.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 12.Timing.Number of Data Points = "10" RB2 Point Collection Array 12.Point Collection Type = "0" RB2 Point Collection Array 12.Fitting = "" RB2 Point Collection Array 12.Digitizer Name = "Digitizer" RB2 Point Collection Array 12.Digitizer Points = " " RB2 Point Collection Array 12.Reference Sensor Name = "" RB2 Point Collection Array 12.Reference Sensor Points = " " RB2 Point Collection Array 13.Linkage.Linked? = "FALSE" RB2 Point Collection Array 13.Linkage.Linked RB Name = "" RB2 Point Collection Array 13.Linkage.Linked Index = "0" RB2 Point Collection Array 13.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 13.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 13.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 13.Timing.Number of Data Points = "10" RB2 Point Collection Array 13.Point Collection Type = "0" RB2 Point Collection Array 13.Fitting = "" RB2 Point Collection Array 13.Digitizer Name = "Digitizer" RB2 Point Collection Array 13.Digitizer Points = " " RB2 Point Collection Array 13.Reference Sensor Name = "" RB2 Point Collection Array 13.Reference Sensor Points = " " RB1 Fid Pt Collection Array. = "3" RB1 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 0.Point Collection Type = "0" RB1 Fid Pt Collection Array 0.Fitting = "" RB1 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 0.Digitizer Points = " " RB1 Fid Pt Collection Array 0.Reference Sensor Name = "" RB1 Fid Pt Collection Array 0.Reference Sensor Points = " " RB1 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 1.Point Collection Type = "0" RB1 Fid Pt Collection Array 1.Fitting = "" RB1 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 1.Digitizer Points = " " RB1 Fid Pt Collection Array 1.Reference Sensor Name = "" RB1 Fid Pt Collection Array 1.Reference Sensor Points = " " RB1 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 2.Point Collection Type = "0" RB1 Fid Pt Collection Array 2.Fitting = "" RB1 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 2.Digitizer Points = " " RB1 Fid Pt Collection Array 2.Reference Sensor Name = "" RB1 Fid Pt Collection Array 2.Reference Sensor Points = " " RB2 Fid Pt Collection Array. = "3" RB2 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 0.Point Collection Type = "0" RB2 Fid Pt Collection Array 0.Fitting = "" RB2 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 0.Digitizer Points = " " RB2 Fid Pt Collection Array 0.Reference Sensor Name = "" RB2 Fid Pt Collection Array 0.Reference Sensor Points = " " RB2 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 1.Point Collection Type = "0" RB2 Fid Pt Collection Array 1.Fitting = "" RB2 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 1.Digitizer Points = " " RB2 Fid Pt Collection Array 1.Reference Sensor Name = "" RB2 Fid Pt Collection Array 1.Reference Sensor Points = " " RB2 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 2.Point Collection Type = "0" RB2 Fid Pt Collection Array 2.Fitting = "" RB2 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 2.Digitizer Points = " " RB2 Fid Pt Collection Array 2.Reference Sensor Name = "" RB2 Fid Pt Collection Array 2.Reference Sensor Points = " " Rigid Body 1 CS Definition Name = "" Rigid Body 2 CS Definition Name = "Scalpel" [Scalpel LC2REF] Version = "2.3.1.0.0" Class = "Surgical Tool Load Cell 2 REF.lvclass" Name = "Scalpel LC2REF" Description = "This is the default 6-DOF position state using a single sensor" Notes = "This state is the relative position of two rigid bodies given the position in space of a position sensors. It stores the relative (static) relationship between the rigid bodies and the sensor and then given the sensor position it can calculate the relative positions. The position sensor in the included sensor array is the relative rigid body (rigid body 2) and the x, y, z, roll, pitch, yaw relationship is the position of the rigid body 2 relative to he fixed rigid body 1. Input and output units are expected to be mm and deg.\0A\0AThis state assumes that Rigid Body 1 is static and Rigid Body 2 is dynamic. This is a requirement to be able to measure relative position with a single sensor. This state does NOT assume that the digitizer for the point collection is in the same reference frame as the position sensor. However, it does assume that the digitizer is in the WORLD1 reference frame. In other words, the static Rigid Body (rigid body 1) and the digitizer are in the same World frame. Digitization of Rigid Body 2 will be done in the World1 reference frame (since that is what the digitizer operates in) but the T_World1_World2 matrix will need to be utilized to calculate the T_Sensor2_RB2 matrix." Channel Names. = "6" Channel Names 0 = "x" Channel Names 1 = "y" Channel Names 2 = "z" Channel Names 3 = "roll" Channel Names 4 = "pitch" Channel Names 5 = "yaw" Channel Units. = "6" Channel Units 0 = "mm" Channel Units 1 = "mm" Channel Units 2 = "mm" Channel Units 3 = "deg" Channel Units 4 = "deg" Channel Units 5 = "deg" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "1" Included Sensors 0 = "Scalpel Pos" Included States. = "0" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Surgical Tool Load Cell 2 REF" Data Description Parameters.Data Name = "Scalpel LC2REF" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Scalpel LC2REF" Enable State = "TRUE" Collected Points Rigid Body 1 (m) = " " Collected Points Rigid Body 1 Position Sensor (m,rad) = " " Collected Points Rigid Body 2 (m) = " 0.9767510376 0.6920964355 0.0834301529 0.9680905151 0.6992349243 0.1213579102 0.9603612061 0.7117346191 0.1275922470 0.9346674194 0.7270936890 0.0903939667 0.9215961914 0.7285743408 0.0924629974 0.8465255127 0.7146672974 0.2805784607" Collected Points Rigid Body 2 Position Sensor (m,rad) = " 1.0067253418 0.6692767944 0.0742944336 2.3115553829 -0.6097867245 -0.1358760268 0.9846140747 0.6877283936 0.1070270157 1.7588402672 0.0176886993 -0.0491676129 0.9894765625 0.6922815552 0.1138762512 1.3551150328 0.3033079825 -0.0538994551 0.9638138428 0.7183300781 0.0773416061 -0.2139267369 0.6985838390 -0.8383677717 0.9521071777 0.7164733276 0.0836435547 -0.5018472742 0.6344773571 -1.2156255791 0.8845914307 0.7064006958 0.2851470337 -0.5965691232 0.4940207098 -1.0880107612" Position Offset (m,rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T_Sensor1_RB1 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_Sensor2_RB2 = " -0.0542448373 -0.4919628542 -0.8689246502 -0.0286720204 -0.9983355054 0.0437919699 0.0375297496 -0.0034399994 0.0195886794 0.8695141249 -0.4935194730 -0.0223973010 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Collected Point Names - Rigid Body 1. = "0" Collected Point Names - Rigid Body 2. = "6" Collected Point Names - Rigid Body 2 0 = "ScalpelDivots-Handle01" Collected Point Names - Rigid Body 2 1 = "ScalpelDivots-Handle02" Collected Point Names - Rigid Body 2 2 = "ScalpelDivots-Handle03" Collected Point Names - Rigid Body 2 3 = "ScalpelDivots-Handle04" Collected Point Names - Rigid Body 2 4 = "ScalpelDivots-Handle05" Collected Point Names - Rigid Body 2 5 = "ScalpelDivots-Handle06" Collected Point Images - Rigid Body 1. = "3" Collected Point Images - Rigid Body 1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Point Images - Rigid Body 1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Point Images - Rigid Body 1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Point Images - Rigid Body 2. = "6" Collected Point Images - Rigid Body 2 0 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ScalpelDivots-Handle01.png" Collected Point Images - Rigid Body 2 1 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ScalpelDivots-Handle02.png" Collected Point Images - Rigid Body 2 2 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ScalpelDivots-Handle03.png" Collected Point Images - Rigid Body 2 3 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ScalpelDivots-Handle04.png" Collected Point Images - Rigid Body 2 4 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ScalpelDivots-Handle05.png" Collected Point Images - Rigid Body 2 5 = "/C/Workspaces/Multis_Surgical Tools/Setup/Images/ScalpelDivots-Handle06.png" T_World1_World2 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Rigid Body 1 Name = "World" Rigid Body 2 Name = "Scalpel LC" Initial Collected Points Rigid Body 1 (m) = " " Initial Collected Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Fiducials Enabled RB1 = "FALSE" Fiducials Enabled RB2 = "FALSE" Fiducial Type RB1 = "Manual Digitization" Fiducial Type RB2 = "Manual Digitization" Rigid Body 1 Fiducial Sensor Name = "" Rigid Body 2 Fiducial Sensor Name = "" Rigid Body 1 Number of Fiducials = "0.0000000000" Rigid Body 2 Number of Fiducials = "0.0000000000" Initial Manual Fiducial Points Rigid Body 1 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Manual Fiducial Points Rigid Body 1 (m) = " " Final Manual Fiducial Points Rigid Body 2 (m) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Initial Fiducial Position Rigid Body 2 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 1 (m, rad) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Final Fiducial Position Rigid Body 2 (m, rady) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" T RB1-OPT_RB1-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T RB2-OPT_RB2-Orig = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" T_World1_World2 for Fiducials = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen1_RB1 = " 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Initial T Sen2_RB2 = " -0.0542448373 -0.4919628542 -0.8689246502 -0.0286720204 -0.9983355054 0.0437919699 0.0375297496 -0.0034399994 0.0195886794 0.8695141249 -0.4935194730 -0.0223973010 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Digitization Phase = "Final" Collected 6-DOF Fiducial Point Images - RB1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Images - RB2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Names - RB1. = "0" Collected Manual Fiducial Point Names - RB2. = "0" Collected Manual Fiducial Point Images - RB1. = "3" Collected Manual Fiducial Point Images - RB1 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB1 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2. = "3" Collected Manual Fiducial Point Images - RB2 0 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 1 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected Manual Fiducial Point Images - RB2 2 = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Functions/Images/Custom Point.jpg" Collected 6-DOF Fiducial Point Names - RB1 = "" Collected 6-DOF Fiducial Point Names - RB2 = "" RB1 Point Collection Array. = "0" RB2 Point Collection Array. = "6" RB2 Point Collection Array 0.Linkage.Linked? = "FALSE" RB2 Point Collection Array 0.Linkage.Linked RB Name = "" RB2 Point Collection Array 0.Linkage.Linked Index = "0" RB2 Point Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 0.Timing.Number of Data Points = "10" RB2 Point Collection Array 0.Point Collection Type = "0" RB2 Point Collection Array 0.Fitting = "" RB2 Point Collection Array 0.Digitizer Name = "Digitizer" RB2 Point Collection Array 0.Digitizer Points = " " RB2 Point Collection Array 0.Reference Sensor Name = "" RB2 Point Collection Array 0.Reference Sensor Points = " " RB2 Point Collection Array 1.Linkage.Linked? = "FALSE" RB2 Point Collection Array 1.Linkage.Linked RB Name = "" RB2 Point Collection Array 1.Linkage.Linked Index = "0" RB2 Point Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 1.Timing.Number of Data Points = "10" RB2 Point Collection Array 1.Point Collection Type = "0" RB2 Point Collection Array 1.Fitting = "" RB2 Point Collection Array 1.Digitizer Name = "Digitizer" RB2 Point Collection Array 1.Digitizer Points = " " RB2 Point Collection Array 1.Reference Sensor Name = "" RB2 Point Collection Array 1.Reference Sensor Points = " " RB2 Point Collection Array 2.Linkage.Linked? = "FALSE" RB2 Point Collection Array 2.Linkage.Linked RB Name = "" RB2 Point Collection Array 2.Linkage.Linked Index = "0" RB2 Point Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 2.Timing.Number of Data Points = "10" RB2 Point Collection Array 2.Point Collection Type = "0" RB2 Point Collection Array 2.Fitting = "" RB2 Point Collection Array 2.Digitizer Name = "Digitizer" RB2 Point Collection Array 2.Digitizer Points = " " RB2 Point Collection Array 2.Reference Sensor Name = "" RB2 Point Collection Array 2.Reference Sensor Points = " " RB2 Point Collection Array 3.Linkage.Linked? = "FALSE" RB2 Point Collection Array 3.Linkage.Linked RB Name = "" RB2 Point Collection Array 3.Linkage.Linked Index = "0" RB2 Point Collection Array 3.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 3.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 3.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 3.Timing.Number of Data Points = "10" RB2 Point Collection Array 3.Point Collection Type = "0" RB2 Point Collection Array 3.Fitting = "" RB2 Point Collection Array 3.Digitizer Name = "Digitizer" RB2 Point Collection Array 3.Digitizer Points = " " RB2 Point Collection Array 3.Reference Sensor Name = "" RB2 Point Collection Array 3.Reference Sensor Points = " " RB2 Point Collection Array 4.Linkage.Linked? = "FALSE" RB2 Point Collection Array 4.Linkage.Linked RB Name = "" RB2 Point Collection Array 4.Linkage.Linked Index = "0" RB2 Point Collection Array 4.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 4.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 4.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 4.Timing.Number of Data Points = "10" RB2 Point Collection Array 4.Point Collection Type = "0" RB2 Point Collection Array 4.Fitting = "" RB2 Point Collection Array 4.Digitizer Name = "Digitizer" RB2 Point Collection Array 4.Digitizer Points = " " RB2 Point Collection Array 4.Reference Sensor Name = "" RB2 Point Collection Array 4.Reference Sensor Points = " " RB2 Point Collection Array 5.Linkage.Linked? = "FALSE" RB2 Point Collection Array 5.Linkage.Linked RB Name = "" RB2 Point Collection Array 5.Linkage.Linked Index = "0" RB2 Point Collection Array 5.Timing.Digitization Delay (s) = "0.0000000000" RB2 Point Collection Array 5.Timing.Capture Time (s) = "30.0000000000" RB2 Point Collection Array 5.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Point Collection Array 5.Timing.Number of Data Points = "10" RB2 Point Collection Array 5.Point Collection Type = "0" RB2 Point Collection Array 5.Fitting = "" RB2 Point Collection Array 5.Digitizer Name = "Digitizer" RB2 Point Collection Array 5.Digitizer Points = " " RB2 Point Collection Array 5.Reference Sensor Name = "" RB2 Point Collection Array 5.Reference Sensor Points = " " RB1 Fid Pt Collection Array. = "3" RB1 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 0.Point Collection Type = "0" RB1 Fid Pt Collection Array 0.Fitting = "" RB1 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 0.Digitizer Points = " " RB1 Fid Pt Collection Array 0.Reference Sensor Name = "" RB1 Fid Pt Collection Array 0.Reference Sensor Points = " " RB1 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 1.Point Collection Type = "0" RB1 Fid Pt Collection Array 1.Fitting = "" RB1 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 1.Digitizer Points = " " RB1 Fid Pt Collection Array 1.Reference Sensor Name = "" RB1 Fid Pt Collection Array 1.Reference Sensor Points = " " RB1 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB1 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB1 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB1 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB1 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB1 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB1 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB1 Fid Pt Collection Array 2.Point Collection Type = "0" RB1 Fid Pt Collection Array 2.Fitting = "" RB1 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB1 Fid Pt Collection Array 2.Digitizer Points = " " RB1 Fid Pt Collection Array 2.Reference Sensor Name = "" RB1 Fid Pt Collection Array 2.Reference Sensor Points = " " RB2 Fid Pt Collection Array. = "3" RB2 Fid Pt Collection Array 0.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 0.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 0.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 0.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 0.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 0.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 0.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 0.Point Collection Type = "0" RB2 Fid Pt Collection Array 0.Fitting = "" RB2 Fid Pt Collection Array 0.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 0.Digitizer Points = " " RB2 Fid Pt Collection Array 0.Reference Sensor Name = "" RB2 Fid Pt Collection Array 0.Reference Sensor Points = " " RB2 Fid Pt Collection Array 1.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 1.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 1.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 1.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 1.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 1.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 1.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 1.Point Collection Type = "0" RB2 Fid Pt Collection Array 1.Fitting = "" RB2 Fid Pt Collection Array 1.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 1.Digitizer Points = " " RB2 Fid Pt Collection Array 1.Reference Sensor Name = "" RB2 Fid Pt Collection Array 1.Reference Sensor Points = " " RB2 Fid Pt Collection Array 2.Linkage.Linked? = "FALSE" RB2 Fid Pt Collection Array 2.Linkage.Linked RB Name = "" RB2 Fid Pt Collection Array 2.Linkage.Linked Index = "0" RB2 Fid Pt Collection Array 2.Timing.Digitization Delay (s) = "0.0000000000" RB2 Fid Pt Collection Array 2.Timing.Capture Time (s) = "30.0000000000" RB2 Fid Pt Collection Array 2.Timing.Rate of Data Collection (Hz) = "10.0000000000" RB2 Fid Pt Collection Array 2.Timing.Number of Data Points = "10" RB2 Fid Pt Collection Array 2.Point Collection Type = "0" RB2 Fid Pt Collection Array 2.Fitting = "" RB2 Fid Pt Collection Array 2.Digitizer Name = "Digitizer" RB2 Fid Pt Collection Array 2.Digitizer Points = " " RB2 Fid Pt Collection Array 2.Reference Sensor Name = "" RB2 Fid Pt Collection Array 2.Reference Sensor Points = " " Rigid Body 1 CS Definition Name = "" Rigid Body 2 CS Definition Name = "" Gravity Compensation = "FALSE" 6-DOF Load Sensor - Rigid Body = "Rigid Body 2" Dynamic Load Transformation = "FALSE" Divot Points in LC Frame = " -0.0073020000 -0.0126390000 -0.0055900000 -0.0145910000 -0.0000004999 -0.0055900000 -0.0072900000 0.0126330000 -0.0055900000 0.0073010000 0.0126260000 -0.0055900000 0.0145910000 -0.0000134999 -0.0055900000 0.0072890000 -0.0126460000 -0.0055900000" [Scalpel Load] Version = "2.0" Class = "Surgical Tool 6 DOF Load.lvclass" Name = "Scalpel Load" Description = "This is the default 6-DOF load state" Notes = "This state is the 6-DOF loads acting on a rigid body given a 6-DOF Position state describing the position of said rigid body with respect to the position of a 6-DOF load cell and the load cell sensor output. It can transform the loads to the rigid body coordinate system with or without gravity compensation. Input and output units are expected to be mm and deg and N and Nm.\0AWhen performing the static loads transform the state needs to be appropriately formulated." Channel Names. = "6" Channel Names 0 = "Fx" Channel Names 1 = "Fy" Channel Names 2 = "Fz" Channel Names 3 = "Mx" Channel Names 4 = "My" Channel Names 5 = "Mz" Channel Units. = "6" Channel Units 0 = "N" Channel Units 1 = "N" Channel Units 2 = "N" Channel Units 3 = "Nm" Channel Units 4 = "Nm" Channel Units 5 = "Nm" Channel Units Scale Factor = " 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000 1.0000000000" Included Sensors. = "1" Included Sensors 0 = "Scalpel LC" Included States. = "2" Included States 0 = "Scalpel LC2REF" Included States 1 = "Scalpel" Save to Disk = "TRUE" Included Controllers. = "0" Data Description Parameters.Category = "Use Custom Subgroup Input" Data Description Parameters.Source = "Use Custom Subgroup Input" Data Description Parameters.Mode = "Use Custom Subgroup Input" Data Description Parameters.Custom Subgroup = "" Data Description Parameters.Type = "State" Data Description Parameters.Class Name = "Surgical Tool 6 DOF Load" Data Description Parameters.Data Name = "Scalpel Load" Data Description Parameters.Use Category = "FALSE" Data Description Parameters.Use Source = "FALSE" Data Description Parameters.Use Mode = "FALSE" Data Group = "State.Scalpel Load" Enable State = "TRUE" Gravity Vector = " 0.0000000000 0.0000000000 -1.0000000000" Gravity Compensation = "FALSE" Inertial Compensation = "FALSE" 6-DOF Load Sensor - Rigid Body = "Rigid Body 2" Load Cell Offsets (N, Nm) = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Center of Mass in Load Cell CS (mm) = " 0.0000000000 0.0000000000 0.0000000000" Load Cell Mass (N) = "0.0000000000" Load Cell Data Array = " 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000" Dynamic Load Transformation = "FALSE" Static Transformation Matrix- T_REF_LOAD = " -0.1869725291 0.2219365652 -0.9569667886 0.0036938842 -0.9754926692 0.0730811048 0.2075408501 0.0012245094 0.1159970936 0.9723185245 0.2028333334 0.0677282904 0.0000000000 0.0000000000 0.0000000000 1.0000000000" Gravity Compensation Library Configuration File Path = "/C/Program Files/National Instruments/LabVIEW 2016/vi.lib/BioRobotics/SSCAD Toolkit/State/Classes/State/6-DOF/6-DOF Load/Gravity_Compensation_Library.ini" Gravity Compensation Type = ""